Versions Compared

Old Version 2

changes.mady.by.user Jenkins Technical User

Saved on

compared with

New Version 3

changes.mady.by.user Jenkins Technical User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/FUNCintent/571/

...

commit 81b75a9e00061d655b2cfbdb8c734753b2bb8c09 9bf9356464cf4f997176ef837c18dc05abd03799 (HEAD, origin/onos-1.6, onos-1.6)
Author: Sho SHIMIZU Simon Hunt [sshimizu@ussimon@onlab.fujitsu.comus]
AuthorDate: Wed Fri May 18 1527 19:1134:31 34 2016 -0700
Commit: Sho SHIMIZU Simon Hunt [shimizu.sho@jp.fujitsu.comsimon@onlab.us]
CommitDate: Wed Fri May 25 1027 19:2734:44 34 2016 -0700
Modify DiscreteResourceCodec interface
ONOS-4619: Web UI -- Support for chained dialog operations.

Case 1: Constructing test variables and building ONOS package - PASS

...

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - FAIL (error)
    • Assertion Result for 1HOP IPV4 with no mac address point intents
  • PASS (tick)

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents FailedPassed

Case 18: Stop Mininet and Scapy - PASS

...

  • 1000.1 IPV4: Add host intents between h1 and h9 - FAIL (error)
    • Assertion Result for IPV4 host intent with mac addresses
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Failed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Passed
    • Remove Intents Passed
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - FAIL (error)
    • Assertion Result vlan IPV4
  • PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - FAIL (error)
    • ONOS Leader Mismatch
  • PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

...

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - FAIL (error)PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
  • 3000.5 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for single to multi point intent with VLAN treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall PassedFailed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received PassedRecieved Failed
    • Remove Intents Passed

Case

...

5000:

...

Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

Case 6000: Test Multi to Single End Point Failure - FAIL

  • 6000.1 Installing Multi to Single Point

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addressesend point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Bad Recipient Ping Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Link Isolation link Down Flow State Passed
    • Link Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State PassedFailed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 4000 6000.3 IPV4_2 : Add multi point to single point intents - PASS (tick) 4000.4 VLAN: Add multi point to single NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi to single point intent with IPV4 type and no MAC addresses in the same VLANno options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping FailedBad Sender Ping Connectivity Check PassedBad Recipient Ping
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Connectivity Check PassedLink Up
    • Isolation link Down Passed
    • Link Up Isolation link Down Intent State PassedLink Up Failed
    • Isolation link Down Flow State Passed
    • Link Up Isolation link Down Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Up Flow State Passed
    • Link Down Up Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved FailedUp Scapy Packet Received Passed
    • Remove Intents Passed

Case

...

18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

  • 18.1 Stopping and Removing Scapy Host Components 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000 18.2 IPV4: Add host intents between h1 and h9 Stopping Mininet Topology - PASS (tick)

Case

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Failed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

  • 18.1 Stopping and Removing Scapy Host Components - PASS (tick)
  • 18.2 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Uninstalling ONOS package - PASS (tick)
  • 2.2 Apply cell to environment - PASS (tick)
  • 2.3 Creating ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

  • 10.1 Starting Mininet topology with OF 1.0 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Create scapy components - PASS

  • 13.1 Create scapy components - No Result (warning)
  • 13.2 Start scapy components - PASS (tick)

Case 15: Discover all hosts using scapy - PASS

  • 15.1 Send packets from each host to the first host and confirm onos discovery - PASS (tick)
  • 15.2 Populate hostsData - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

...

2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Uninstalling ONOS package - PASS (tick)
  • 2.2 Apply cell to environment - PASS (tick)
  • 2.3 Creating ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

  • 10.1 Starting Mininet topology with OF 1.0 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Create scapy components - PASS

  • 13.1 Create scapy components - No Result (warning)
  • 13.2 Start scapy components - PASS (tick)

Case 15: Discover all hosts using scapy - PASS

  • 15.1 Send packets from each host to the first host and confirm onos discovery - PASS (tick)
  • 15.2 Populate hostsData - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

FAIL

This test case tests Host will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL (error)
    • Assertion Result for Dualstack1 IPV4 with mac address point intents
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for single to multi point intent with VLAN treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

Objectives

  • 4000.1 NOOPTION
  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 4000.3 IPV4_2: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2 4000.4 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Intial Initial Flow State FailedPassed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Intial Flow State Failed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL (error)
  • Assertion Result for Dualstack1 IPV4 with mac address point intents
  • Initial Intent State Passed
  • Initial Flow State Passed
  • Initial Ping Passed
  • Link Down Passed
  • Link Down Intent State Passed
  • Link Down Flow State Passed
  • Link Down Topology State Failed
  • Link Down Pingall Passed
  • Link Up Passed
  • Link Up Intent State Passed
  • Link Up Flow State Passed
  • Link Up Topology State Passed
  • Link Up Scapy Packet Received Passed
  • - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
    • Remove Intents Passed
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

  • 18.1 Stopping and Removing Scapy Host Components - PASS (tick)
  • 18.2 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Uninstalling ONOS package - PASS (tick)
  • 2.2 Apply cell to environment - PASS (tick)
  • 2.3 Creating ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Create scapy components - PASS

  • 13.1 Create scapy components - No Result (warning)
  • 13.2 Start scapy components - PASS (tick)

Case 15: Discover all hosts using scapy - PASS

  • 15.1 Send packets from each host to the first host and confirm onos discovery - PASS (tick)
  • 15.2 Populate hostsData - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

...

    • Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

  • 18.1 Stopping and Removing Scapy Host Components - PASS (tick)
  • 18.2 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Uninstalling ONOS package - PASS (tick)
  • 2.2 Apply cell to environment - PASS (tick)
  • 2.3 Creating ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Create scapy components - PASS

  • 13.1 Create scapy components - No Result (warning)
  • 13.2 Start scapy components - PASS (tick)

Case 15: Discover all hosts using scapy - PASS

  • 15.1 Send packets from each host to the first host and confirm onos discovery - PASS (tick)
  • 15.2 Populate hostsData - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -

...

PASS

This test case tests Host will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 1000 2000.1 IPV4NOOPTION: Add host point intents between h1 and h9 - PASS (tick) 1000
  • 2000.2 DUALSTACK1IPV4: Add host point intents between h3 h1 and h11 h9 - PASS (tick) 1000
  • 2000.3 DUALSTACK2IPV4_2: Add host point intents between h1 and h11 h9 - PASS (tick)
  • 1000 2000.4 1HOPSDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add host point intents between h1 and h3 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 1000 2000.5 VLAN17 VLAN: Add vlan host point intents between h4 h5 and h12 h21 - PASS (tick) 1000
  • 2000.6 VLAN28 VLAN: Add vlan host point intents between h4 and h13 - FAIL (error)
    • Assertion Result vlan IPV4
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Failed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Passed
    • Remove Intents Passed
  • 1000.7 Confirm that ONOS leadership is unchanged - FAIL (error)
    • ONOS Leader Mismatch

...

  • h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL (error)
    • Assertion Result for Dualstack1 IPV4 with mac address point intents
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

...

.3 OVS running in Mininet and compile intents using Flow Objectives

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 3000 4000.1 NOOPTION: Install and test single Add multi point to multi single point intents - PASS (tick) 3000
  • 4000.2 IPV4: Install and test single Add multi point to multi single point intents - PASS (tick)
  • 3000 4000.3 IPV4_2: Add single multi point to multi single point intents - PASS (tick)
  • 3000 4000.4 VLAN: Add single multi point to multi single point intents - PASS (tick)
  • 3000 4000.5 VLAN: Add single multi point to multi single point intents - FAIL (error)
    • Assertion results for multi to single to multi point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

Case

...

5000:

...

Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents host intents between h1 and h9 - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses

Case 6000: Test Multi to Single End Point Failure - FAIL

  • 6000.1 Installing Multi to Single Point 4000.4 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • no options set
    • Initial Link Down Intent State PassedLink Down
    • Intial Flow State Failed
    • Initial Connectivity Check Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up PassedLink Up Down Intent State Passed
    • Link Up Down Flow State Passed
    • Link Up Down Topology State Passed
    • Link Up Scapy Packet Received Down Connectivity Check Passed
    • Remove Intents Passed
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Failed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved FailedReceived Passed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

Case 6000: Test Multi to Single End Point Failure - FAIL

  • 6000.1 Installing Multi to Single Point 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Passed
    • Remove Intents Passed Assertion results for IPV4 single to multi point intent with no options set

Case 18: Stop Mininet and Scapy - PASS

...

  • 3000.1 NOOPTION: Install and test single point to multi point intents - FAIL (error)
  • Assertion results for IPV4 single to multi point intent with no options set
  • Initial Intent State Passed
  • Initial Flow State Passed
  • Initial Ping Failed
  • Bad Sender Ping Passed
  • Bad Recipient Ping Passed
  • Link Down Passed
  • Link Down Intent State Passed
  • Link Down Flow State Passed
  • Link Down Topology State Passed
  • Link Down Pingall Passed
  • Link Up Passed
  • Link Up Intent State Passed
  • Link Up Flow State Passed
  • Link Up Topology State Passed
  • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping FailedPassed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State PassedFailed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - FAIL (error)
  • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
  • Initial Intent State Passed
  • Initial Flow State Passed
  • Initial Ping Passed
  • Bad Sender Ping Passed
  • Bad Recipient Ping Passed
  • Link Down Passed
  • Link Down Intent State Passed
  • Link Down Flow State Passed
  • Link Down Topology State Passed
  • Link Down Pingall Failed
  • Link Up Passed
  • Link Up Intent State Passed
  • Link Up Flow State Passed
  • Link Up Topology State Passed
  • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping PassedFailed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State FailedPassed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...