Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/FUNCintent/578/

...

commit 19bd1301c278edfc91a00d2cb1eb2aae9130965a 883f1e334cc528ed1523d2d1d1dd04696ddf2236 (HEAD, origin/onos-1.6, onos-1.6)
Author: Bharat saraswal Hyunsun Moon [bharathyunsun.saraswal@huaweimoon@gmail.com]
AuthorDate: Sat Wed May 18 21:28 17:50:57 2016 +053006 2016 -0700
Commit: bharat saraswal-huawei [bharat.saraswal@huawei.comGerrit Code Review [gerrit@onlab.us]
CommitDate: Sat May 28 13:09:14 Thu Jun 2 01:03:25 2016 +0000
[ONOS-4627] Rpc empty folder structure issue fixed.
Make some DHCP options and host discovery configurable
--
(cherry picked from commit 04b1fe9adab1382e89a743174b40505f900cd6b9)

Case 1: Constructing test variables and building ONOS package - PASS

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State PassedInitial
    • Intial Flow State PassedFailed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - FAIL (error)
    • Assertion Result for 1HOP for IPV4 same switch
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Passed
    • Remove Intents Passed
  • PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State FailedPassed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives -

...

FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • FAIL (error)
    • Assertion Result for IPV4 point intent
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Failed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)FAIL (error)
    • Assertion Result for VLAN IPV4 point intents with VLAN treatment
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)FAIL (error)
    • Assertion Result for 1HOP IPV4 with no mac address point intents
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed

Case 3000Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

...

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 3000.2 IPV4: Install and test 3000.4 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 3000.3 IPV4_2 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 3000.4 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Failed
  • 3000.5 VLAN: Add single point to multi point intents - FAIL (error)
    • Assertion results for single to multi point intent with VLAN treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 4000.1 NOOPTION: Add multi point to single point intents - FAIL (error)
    • Assertion results for NOOPTION multi to single point intent
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 4000.2 IPV4: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 4000.3 IPV4_2: Add multi point to single point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
  • 4000.4 VLAN
  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add
  • FAIL (error)
    • Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Failed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Failed
    multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents PassedFailed

Case 5000: Test host mobility with host intents -

...

FAIL

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)and h9 - FAIL (error)
    • Assert result for IPV4 host intent between h1, moved, and h9
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Passed
    • Remove Intents Failed

Case 6000: Test Multi to Single End Point Failure - FAIL

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State PassedInitial
    • Intial Flow State PassedFailed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents PassedFailed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Intial Flow State Failed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents PassedFailed

Case 18: Stop Mininet and Scapy - PASS

...

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)FAIL (error)
    • Assertion Result for VLAN IPV4 with mac address point intents
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Failed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State FailedPassed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall PassedFailed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State PassedInitial
    • Intial Flow State PassedFailed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State PassedFailed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - FAIL (error)
  • Assertion results for single to multi point intent with VLAN treatment
  • Initial Intent State Passed
  • Initial Flow State Passed
  • Initial Ping Passed
  • Bad Sender Ping Passed
  • Bad Recipient Ping Passed
  • Link Down Passed
  • Link Down Intent State Passed
  • Link Down Flow State Passed
  • Link Down Topology State Passed
  • Link Down Pingall Passed
  • Link Up Passed
  • Link Up Intent State Passed
  • Link Up Flow State Passed
  • Link Up Topology State Failed
  • Link Up Scapy Packet Received Passed
  • single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)
  • Remove Intents Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

...

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)FAIL (error)
    • Assertion Result for IPV4 host intent with mac addresses
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS (tick)
  • 2000.2 IPV4: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)FAIL (error)
    • Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.8 VLAN: Add point intents between h5 and h21 - PASS (tick)
  • 2000.9 1HOP: Add point intents between h1 and h3 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 3000.1 NOOPTION: Install and test single point to multi point intents - PASS (tick)
  • 3000.2 IPV4: Install and test single point to multi point intents - PASS (tick)
  • 3000.3 IPV4_2: Add single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
  • PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)
  • 3000.5 VLAN: Add single point to multi point intents - PASS (tick)

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - FAIL (error)
  • Assertion results for IPV4 multi
  • to single point
  • intent with IPV4 type and no MAC addresses in the same VLAN
  • intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved FailedReceived Passed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State PassedInitial
    • Intial Flow State PassedFailed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State FailedPassed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check FailedPassed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

  • 1000.1 IPV4: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS (tick)
  • 1000.4 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS (tick)
  • 1000.6 VLAN2: Add vlan host intents between h4 and h13 - FAIL (error)
    • Assertion Result vlan IPV4
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Failed
    • Link Down Pingall Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Passed
    • Remove Intents Passed
  • PASS (tick)
  • 1000.7 Confirm that ONOS leadership is unchanged - FAIL (error)
  • ONOS Leader Mismatch
  • PASS (tick)

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

...

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV4: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV4_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)
  • 4000.5 VLAN: Add multi point to single point intents - FAIL (error)
    • Assertion results for multi to single point intent with VLAN ID treatment
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Ping Failed
    • Bad Sender Ping Passed
    • Bad Recipient Ping Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Pingall Failed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Recieved Failed
    • Remove Intents Passed

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV4: Add host intents between h1 and h9 - PASS (tick)

...

  • 6000.1 Installing Multi to Single Point intents - FAIL (error)
    • Assertion results for IPV4 multi to single point intent end point failure with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State Failed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State FailedPassed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed
  • 6000.2 NOOPTION: Install and test single point to multi point intents - FAIL (error)
    • Assertion results for IPV4 single to multi point intent with no options set
    • Initial Intent State Passed
    • Initial Flow State Passed
    • Initial Connectivity Check Passed
    • Link Down Passed
    • Link Down Passed
    • Link Down Intent State Passed
    • Link Down Flow State FailedPassed
    • Link Down Topology State Passed
    • Link Down Connectivity Check Passed
    • Isolation link Down Passed
    • Isolation link Down Intent State Failed
    • Isolation link Down Flow State Passed
    • Isolation link Down Topology State Passed
    • Isolation link Down Connectivity Check Passed
    • Isolation link Down Connectivity Check Failed
    • Link Up Passed
    • Link Up Passed
    • Link Up Passed
    • Link Up Intent State Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Scapy Packet Received Passed
    • Remove Intents Passed

...