...
commit e56d38d2d11a6e0cb040aef9ee8fb1bbbca3d0cf 18649e1bc18da50ac26b2a40d965c817f8520173 (HEAD, tag: origin/onos-1.6.0-rc5, onos-1.6)
Author: Brian O'Connor [bocon@onlab.us]
AuthorDate: Thu Fri Jun 23 1924 16:0622:19 45 2016 -0700
Commit: Brian O'Connor [bocon@onlab.us]
CommitDate: Thu Fri Jun 23 1924 16:0622:50 45 2016 -0700
Tagging
Starting snapshot 1.6.01-rc5SNAPSHOT
HTML |
---|
<iframe src="https://onos-jenkins.onlab.us/job/HAclusterRestart/plot/Plot-HA/getPlot?index=2&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe> |
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 3: Adding host Intents -
...
FAIL
Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - PASS
FAIL
- Reactive Pingall failed, one or more ping pairs failed
- 3 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS
...
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents and compare across all nodes - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Get the OF Table entries and compare to before component failure - FAIL
- Changes were found in the flow tables
- 7.7 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
FAIL
- Intents have not been installed correctly, pings failed.
Case 15: Check that Leadership Election is still functional - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
FAIL
- Intents have not been installed correctly, pings failed.
- 4. 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
FAIL
- Intents have not been installed correctly, pings failed.
Case 10: Restore a link to ensure that Link Discovery is working properly - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
FAIL
- Intents have not been installed correctly, pings failed.
Case 11: Killing a switch to ensure it is discovered correctly - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
FAIL
- Intents have not been installed correctly, pings failed.
Case 12: Adding a switch to ensure it is discovered correctly - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
FAIL
- Intents have not been installed correctly, pings failed.
Case 13: Test Cleanup - PASS
...