Page History

...

HTML
<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCintent_onos-1.15_20-builds_graph.jpg", alt="FUNCintent", style="width:525px;height:350px;border:0">

commit b2ba2c487443b759977aa022e2fc48a049a20e5b 86256ff064f398908157eb4f30b24a5e21ce3482 (HEAD -] onos-1.15, origin/onos-1.15)
Author: pier Jian Li [pier@opennetworkingpyguni@gmail.orgcom]
AuthorDate: Tue Dec 10 18:09:00 2019 +0100Thu Jan 30 17:41:26 2020 +0900
Commit: pier Jian Li [pier@opennetworkingpyguni@gmail.orgcom]
CommitDate: Fri Thu Jan 17 1430 21:1502:15 41 2020 +01000900

Fix VERIFY timeout: correctly calculate the broadcast address for DHCP ACK

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intentSDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV45 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed
intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1 2000.3 IPV4_2: Add point intents between h1 h3 and h9 h11 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 h3 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

...

PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents 6000.1 Installing Multi to Single Point intents with no options set - PASS 3000
6000.2 IPV4: Install and test single point to multi point intents Installing Multi to Single Point intents with partial failure allowed - PASS
3000 6000.3 IPV4_2: Add NOOPTION: Install and test single point to multi point intents - PASS 3000
6000.4 VLANNOOPTION: Add Install and test single point to multi point intents with partial failures allowed - PASS 3000.5 VLAN: Add single point to multi point intents

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case

...

19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - FAIL

Mobility: Failed to move h1 to s6 to single point intents with IPV4 type and MAC addresses in the same VLAN

5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Failed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

6000 2000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed 2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion results Result for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check PassedLink Down PassedPing Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Pingall Failed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Failed
After removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000 3000.1 NOOPTION: Add Install and test single point to multi point intents between h1 and h9 - PASS 2000
3000.2 IPV4: Add Install and test single point to multi point intents between h1 and h9 - PASS
2000 3000.3 IPV4_2: Add single point to multi point intents between h1 and h9 - PASS 2000
3000.4 SDNIP-ICMPVLAN: Add single point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case

...

6000: Test Multi to Single

...

End Point

...

Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents 6000.1 Installing Multi to Single Point intents with no options set - PASS 3000
6000.2 IPV4: Install and test single point to multi point intents Installing Multi to Single Point intents with partial failure allowed - PASS
3000 6000.3 IPV4_2: Add NOOPTION: Install and test single point to multi point intents - PASS 3000
6000.4 VLANNOOPTION: Add Install and test single point to multi point intents with partial failures allowed - PASS 3000.5 VLAN: Add single point to multi point intents

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case

...

19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

...

Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000 4000.1 IPV4NOOPTION: Add host intents between h1 and h9 multi point to single point intents - PASS 1000
4000.2 DUALSTACK1IPV4: Add host intents between h3 and h11 multi point to single point intents - PASS 1000
4000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 multi point to single point intents - PASS 1000
4000.4 1HOPVLAN: Add host intents between h1 and h3 multi point to single point intents - PASS 1000
4000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 multi point to single point intents - PASS 1000
4000.6 VLAN2ENCAPSULATION: Add vlan host intents between h4 and h13 multi point to single point intents - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules -

...

PASS

5000.1 Testing host mobility by moving h1 from s5 to s6

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000 5000.2 IPV4: Add point host intents between h1 and h9 - PASS 2000.3 IPV4_2: Add point intents between h1 and h9

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) clusterThis test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000 1000.1 NOOPTIONIPV4: Add multi point to single point intents - host intents between h1 and h9 - PASS 4000
1000.2 IPV4DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
1000.3 IPV4_2DUALSTACK2: Add multi point to single point intents host intents between h1 and h11 - PASS 4000
1000.4 VLAN1HOP: Add multi point to single point intents host intents between h1 and h3 - PASS 4000
1000.5 VLANVLAN1: Add multi point to single point intents vlan host intents between h4 and h12 - PASS 4000
1000.6 ENCAPSULATIONVLAN2: Add multi point to single point intents vlan host intents between h4 and h13 - PASS

...

1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000 2000.2 IPV4: Add host point intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

...

2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesObjectives

3000 1000.1 NOOPTION: Install and test single point to multi point intents IPV4: Add host intents between h1 and h9 - PASS 3000
1000.2 IPV4: Install and test single point to multi point intents DUALSTACK1: Add host intents between h3 and h11 - PASS 3000
1000.3 IPV4_2DUALSTACK2: Add single point to multi point intents host intents between h1 and h11 - PASS 3000
1000.4 VLAN1HOP: Add single point to multi point intents - host intents between h1 and h3 - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

...

1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Objectives -

...

FAIL

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesObjectives

4000 2000.1 NOOPTION: Add multi point to single point intents intents between h1 and h9 - PASS 4000
2000.2 IPV4: Add multi point to single point intents between h1 and h9 - PASS 4000
2000.3 IPV4_2: Add multi point to single point intents intents between h1 and h9 - PASS 4000
2000.4 VLANSDNIP-ICMP: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point
5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case

...

3000:

...

Single to Multi

...

Point

...

Intents Test -

...

1 NODE(S) - OF 1.3 - Using Flow

...

Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents 6000.1 Installing Multi to Single Point intents with no options set - PASS 6000
3000.2 Installing Multi to Single Point intents with partial failure allowed IPV4: Install and test single point to multi point intents - PASS
6000 3000.3 NOOPTION: Install and test IPV4_2: Add single point to multi point intents - PASS 6000
3000.4 NOOPTIONVLAN: Install and test Add single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet 3000.5 VLAN: Add single point to multi point intents - PASS

Case

...

4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS clustercluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents 2.1 Apply cell to environment - PASS
2 4000.2 Uninstalling Atomix IPV4: Add multi point to single point intents - PASS 2
4000.3 Uninstalling ONOS package IPV4_2: Add multi point to single point intents - PASS 2
4000.4 Creating ONOS package VLAN: Add multi point to single point intents - PASS
2 4000.5 Installing Atomix VLAN: Add multi point to single point intents - PASS 2
4000.6 Installing ONOS package ENCAPSULATION: Add multi point to single point intents - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case

...

6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3

...

- Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping FailedConnectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Link Up Intent State PassedLink Up
Partial failure isolation link Down Flow State Passed
Link Up Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Failed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Passed
Link Up Passed
Link
Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

...

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point tests Host intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000 1000.1 NOOPTION: Install and test single point to multi point intents IPV4: Add host intents between h1 and h9 - PASS 3000
1000.2 IPV4: Install and test single point to multi point intents DUALSTACK1: Add host intents between h3 and h11 - PASS 3000
1000.3 IPV4_2DUALSTACK2: Add single point to multi point intents host intents between h1 and h11 - PASS 3000
1000.4 VLAN1HOP: Add single point to multi point intents host intents between h1 and h3 - PASS 3000.5 VLAN: Add single point to multi point intents
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case

...

2000:

...

Point Intents Test -

...

3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000 2000.1 NOOPTION: Add multi point to single point intents between h1 and h9 - PASS 4000
2000.2 IPV4: Add multi point to single point intents between h1 and h9 - PASS 4000
2000.3 IPV4_2: Add multi point to single point intents between h1 and h9 - PASS 4000
2000.4 VLANSDNIP-ICMP: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point
5000.1 Testing host mobility by moving h1 from s5 to s6 - FAIL

Mobility: Failed to move h1 to s6 to single point intents with IPV4 type and MAC addresses in the same VLAN

5000.2 IPV4: Add host intents between h1 and h9 - PASS

...

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - FAIL

Assertion Result for IPV4 host intent with mac addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents PassedAfter removing intents Flow State Passed

1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL

Assertion Result for dualstack IPV4 with MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL

Assertion Result for dualstack2 host intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.4 1HOP: Add host intents between h1 and h3 - FAIL

Assertion Result for 1HOP for IPV4 same switch
Install Intent State Failed
After removing intents Flow State Passed

1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL

Assertion Result vlan IPV4
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.6 VLAN2: Add vlan host intents between h4 and h13 - FAIL

Assertion Result vlan IPV4
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL

Assertion Result for VLAN Encapsulated host intent
Install Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
After removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
After removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Failed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.7 VLAN: Add point intents between h5 and h21 - FAIL

Assertion Result for VLAN IPV4 with mac address point intents

2000.8 VLAN: Add point intents between h5 and h21 - FAIL

Assertion Result for VLAN IPV4 point intents with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.9 1HOP: Add point intents between h1 and h3 - FAIL

Assertion Result for 1HOP IPV4 with no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.5 VLAN: Add single point to multi point intents - FAIL

Assertion results for single to multi point intent with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - FAIL

Assertion results for NOOPTION multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.2 IPV4: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.3 IPV4_2: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
After removing intents Flow State Passed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.5 VLAN: Add multi point to single point intents - FAIL

Assertion results for multi to single point intent with VLAN ID treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL

Assertion results for VLAN Encapsulation multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - FAIL

Mobility: Failed to move h1 to s6 to single point intents with IPV4 type and MAC addresses in the same VLAN

5000.2 IPV4: Add host intents between h1 and h9 - FAIL

Assert result for IPV4 host intent between h1, moved, and h9
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Failed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
After removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed

Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State FailedPassed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

...

Page tree

Page History

Versions Compared

Old Version 50

New Version 51

Key

Case 1: Pull onos branch and build onos on Teststation. - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Case

19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case

6000: Test Multi to Single

End Point

Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Case

19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 4000: Multi To Single Point

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules -

PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS