Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 1.1 Constructing test variables - PASS
- 1.2 Create and Apply cell file - PASS
- 1.3 Create and Install ONOS package - PASS
- 1.4 Starting ONOS service - PASS
- 1.5 Checking if ONOS CLI is ready - PASS
- 1.6 Starting Mininet Topology - PASS
- 1.7 Check whether the flow count is bigger than 116 - PASS
- 1.8 Check whether all flow status are ADDED - PASS
- 1.9 Check full IP connectivity - PASS
- 1.10 Check VLAN connectivity - PASS
- 1.11 Kill link between spine101 and leaf2 - PASS
- 1.12 Check IP connectivity CASE1_Failure - PASS
- 1.11 13 Check full VLAN connectivity CASE1_Failure - PASS
- 1.12 14 Restore link between spine101 and leaf2 - FAIL
- Failed to bring link up
- 1.15 Check IP connectivity CASE1_Recovery - PASS
- 1.13 16 Check full VLAN connectivity CASE1_Recovery - PASS
...
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
- 2.5 Starting Mininet Topology - PASS
- 2.6 Check whether the flow count is bigger than 350 - PASS
- 2.7 Check whether all flow status are ADDED - PASS
- 2.8 Check full IP connectivity - PASS
- 2.9 Check VLAN connectivity - PASS
- 2.10 Kill link between spine101 and leaf2 - PASS
- 2.11 Check IP connectivity CASE2_Failure - PASS
- 2.10 12 Check full VLAN connectivity CASE2_Failure - PASS
- 2.11 13 Restore link between spine101 and leaf2 - FAIL
- Failed to bring link up
- 2.14 Check IP connectivity CASE2_Recovery - PASS
- 2.12 15 Check full VLAN connectivity CASE2_Recovery - PASS
...
- 4.1 Create and Apply cell file - PASS
- 4.2 Create and Install ONOS package - PASS
- 4.3 Starting ONOS service - PASS
- 4.4 Checking if ONOS CLI is ready - PASS
- 4.5 Starting Mininet Topology - PASS
- 4.6 Check whether the flow count is bigger than 116 - PASS
- 4.7 Check whether all flow status are ADDED - PASS
- 4.8 Check full IP connectivity - PASS
- 4.9 Check VLAN connectivity - PASS
- 4.10 Kill link between spine101 and leaf2 - PASS
- 4.11 Check IP connectivity CASE3_Failure - PASS
- 4.10 12 Check full VLAN connectivity CASE3_Failure - PASS
- 4.11 13 Restore link between spine101 and leaf2 - FAIL
- Failed to bring link up
- 4.14 Check IP connectivity CASE3_Recovery - PASS
- 4.15 Check VLAN 12 Check full connectivity CASE3_Recovery - PASS
...
- 5.1 Create and Apply cell file - PASS
- 5.2 Create and Install ONOS package - PASS
- 5.3 Starting ONOS service - PASS
- 5.4 Checking if ONOS CLI is ready - PASS
- 5.5 Starting Mininet Topology - PASS
- 5.6 Check whether the flow count is bigger than 350 - PASS
- 5.7 Check whether all flow status are ADDED - PASS
- 5.8 Check full IP connectivity - PASS
- 5.9 Check VLAN connectivity - PASS
- 5.10 Kill link between spine101 and leaf2 - PASS
- 5.11 Check IP connectivity CASE2_Failure - PASS
- 5.10 12 Check full VLAN connectivity CASE2_Failure - PASS
- 5.11 13 Restore link between spine101 and leaf2 - FAIL
- Failed to bring link up
- 5.14 Check IP connectivity CASE2_Recovery - PASS
- 5.15 Check VLAN 12 Check full connectivity CASE2_Recovery - PASS