...
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -
...
FAIL
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- FAIL
- Assertion result for IPV4 host intent with mac addresses
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- Assertion Result for dualstack IPV4 with MAC addresses
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
- Assertion Result for dualstack2 host intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
- Assertion Result for 1HOP for IPV4 same switch
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
- Assertion Result vlan IPV4
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.6 Confirm that ONOS leadership is unchanged - FAIL
- ONOS Leader Mismatch
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
- Assertion Result for NOOPTION point intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV4 point intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV4 no mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
- Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
- 2000.5 SDNIP-TCP 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV46 DUALSTACK1: Add point intents between h1 h3 and h9 h11 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- FAIL
- Assertion Result for Dualstack1 IPV4 with mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
...
- FAIL
- Assertion Result for VLAN IPV4 with mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
- Assertion Result for 1HOP IPV4 with no mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
Case 5000: Test host mobility with host intents - FAIL
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
- Assert result for IPV4 host intent between h1, moved, and h9
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test point to point tests Host intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000 1000.1 NOOPTIONIPV4: Add point and test host intents between h1 and h9 - PASS
2000
- 1000.2 IPV4DUALSTACK1: Add point host intents between h1 h3 and h9 h11 - PASS
2000
- 1000.3 IPV4_2DUALSTACK2: Add point host intents between h1 and h9 h11 - PASS
- 2000 1000.4 SDNIP-ICMP1HOP: Add point host intents between h1 and h9 h3 - PASS
2000
- 1000.5 SDNIP-TCPVLAN1: Add point vlan host intents between h1 h4 and h9 h12 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 1HOP: Add point intents between h1 and h3 h9 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 5000 2000.3 IPV4_2 IPV4: Add host point intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet Topology
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 19.1 Copying karaf logs - PASS
Case
...
5000: Test host mobility with host intents - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
2
- 5000.2 Apply cell to environment IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
2.5 Starting ONOS service
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs 2.6 Start ONOS cli - PASS
Case
...
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
...
2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.
...
0 - Using Flow
...
Objectives - PASS
This test case will test point to point tests Host intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet and compile intents using Flow RulesObjectives
- 2000 1000.1 NOOPTIONIPV4: Add point and test host intents between h1 and h9 - PASS
2000
- 1000.2 IPV4DUALSTACK1: Add point host intents between h1 h3 and h9 h11 - PASS
2000
- 1000.3 IPV4_2DUALSTACK2: Add point host intents between h1 and h9 h11 - PASS
- 2000 1000.4 SDNIP-ICMP1HOP: Add point host intents between h1 and h9 h3 - PASS
2000
- 1000.5 SDNIP-TCPVLAN1: Add point vlan host intents between h1 h4 and h9 h12 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 1HOP: Add point intents between h1 and h3 h9 - PASS
Case 5000: Test host mobility with host intents - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4 2000.4 SDNIP-ICMP: Add host point intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 19.1 Copying karaf logs - PASS
Case
...
5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
2
- 5000.2 Apply cell to environment IPV4: Add host intents between h1 and h9 - PASS
- 2.3 Creating ONOS package - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli 18.2 Stopping Mininet Topology - PASS
Case
...
19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case
...
2: Starting up 1 node(s) ONOS cluster - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 16.1 Balancing mastership of switches - PASS
Case
...
12: Assign switches to controllers - PASS
Assign OF 1.3
...
switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
...
NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case will test point to point tests Host intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 2000 1000.1 NOOPTIONIPV4: Add point and test host intents between h1 and h9 - PASS
2000
- 1000.2 IPV4DUALSTACK1: Add point host intents between h1 h3 and h9 h11 - PASS
2000
- 1000.3 IPV4_2DUALSTACK2: Add point host intents between h1 and h9 h11 - PASS
- 2000 1000.4 SDNIP-ICMP1HOP: Add point host intents between h1 and h9 h3 - PASS
2000
- 1000.5 SDNIP-TCPVLAN1: Add point vlan host intents between h1 h4 and h9 h12 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 2000.1 NOOPTION.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 1HOP: Add point intents between h1 and h3 h9 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 5000 2000.3 IPV4_2 IPV4: Add host point intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet Topology
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 19.1 Copying karaf logs - PASS
Case
...
5000: Test host mobility with host intents - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
2
- 5000.2 Apply cell to environment IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
2.5 Starting ONOS service
- 18.2 Stopping Mininet Topology - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case
...
2: Starting up 3 node(s) ONOS cluster - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case
...
11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case
...
12:
...
Assign switches to controllers - PASS
...
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers 16.1 Balancing mastership of switches - PASS
Case
...
13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components 17.1 Enabling Flow Objectives - PASS
Case
...
15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test This test case tests Host intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test -
...
3 NODE(S) - OF 1.3 - Using Flow
...
Rules - PASS
This test case will test point to point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives.3 OVS running in Mininet and compile intents using Flow Rules
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - FAIL
- Assertion result for IPV4 host intent with mac addresses
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- Assertion Result for dualstack IPV4 with MAC addresses
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
- Assertion Result for dualstack2 host intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
- Assertion Result for 1HOP for IPV4 same switch
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
- Assertion Result vlan IPV4
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.6 Confirm that ONOS leadership is unchanged - FAIL
- ONOS Leader Mismatch
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
- Assertion Result for NOOPTION point intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV4 point intent
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV4 no mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
- Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
- Assertion Result for Dualstack1 IPV4 with mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
- Assertion Result for VLAN IPV4 with mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
- Assertion Result for 1HOP IPV4 with no mac address point intents
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
Case 5000: Test host mobility with host intents -
...
FAIL
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
.2 IPV4: Add host intents between h1 and h9 - FAIL
- Assert result for IPV4 host intent between h1, moved, and h9
- Initial Intent State Passed
- Intial Flow State Failed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Failed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Remove Intents Passed
Case 18: Stop Mininet and Scapy - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
...