Page History

...

• 5.1 Create and Apply cell file - PASS
• 5.2 Create and Install ONOS package - PASS
• 5.3 Starting ONOS service - PASS
• 5.4 Checking if ONOS CLI is ready - PASS
• 5.5 Starting Mininet Topology - PASS
• 5.6 Check whether the flow count is bigger than 350 - PASS
• 5.7 Check whether all flow status are ADDED - PASS
• 5.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
• 5.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 5.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 5.11 Pushing new configuration - No Result
• 5.12 Pushing new configuration - No Result
• 5.13 Check whether the flow count is bigger than 380 - PASS
• 5.14 Check whether all flow status are ADDED - PASS
• 5.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5 - PASS
• 5.16 Connectivity for [u'olt10', u'vsg10'] CASE5 - PASS
• 5.17 Connectivity for [u'olt5', u'vsg5'] CASE5 - PASS
• 5.18 Connectivity for ['olt1', 'vsg1'] CASE5 - PASS
• 5.19 Killing ONOS instance - PASS
• 5.20 Removing host configuration - No Result
• 5.21 Removing configuration - No Result
• 5.22 Removing vlan configuration - No Result
• 5.23 Check whether the flow count is bigger than 350 - PASS
• 5.24 Check whether all flow status are ADDED - PASS
• 5.25 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5_After - PASS
• 5.26 Connectivity for [u'olt10', u'vsg10'] CASE5_After - PASS
• 5.27 Connectivity for [u'olt5', u'vsg5'] CASE5_After - PASS
• 5.28 Connectivity for ['olt1', 'vsg1'] CASE5_After - PASS

Case 6: Bridging and Routing sanity test with single switch -

...

PASS

• 6.1 Create and Apply cell file - PASS
• 6.2 Create and Install ONOS package - PASS
• 6.3 Starting ONOS service - PASS
• 6.4 Checking if ONOS CLI is ready - PASS
• 6.5 Starting Mininet Topology - PASS
• 6.6 Check whether the flow count is bigger than 15 - PASS
• 6.7 Check whether all flow status are ADDED - PASS
• 6.8 Connectivity for [u'h1', u'h2'] - PASS
• 6.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 6.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 6.11 Pushing new configuration - No Result
• 6.12 Pushing new configuration - No Result
• 6.13 Check whether the flow count is bigger than 20 - PASS
• 6.14 Check whether all flow status are ADDED - PASS
• 6.15 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6 - FAIL
IP connectivity failed
• PASS
• 6.16 Connectivity for [u'olt10', u'vsg10'] CASE6 - PASS
• 6.17 Connectivity for [u'olt5', u'vsg5'] CASE6 - PASS
• 6.18 Connectivity for ['olt1', 'vsg1'] CASE6 - PASS
• 6.19 Killing ONOS instance - PASS
• 6.20 Removing host configuration - No Result
• 6.21 Removing configuration - No Result
• 6.22 Removing vlan configuration - No Result
• 6.23 Check whether the flow count is bigger than 15 - PASS
• 6.24 Check whether all flow status are ADDED - PASS
• 6.25 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6_After - PASS
• 6.26 Connectivity for [u'olt10', u'vsg10'] CASE6_After - PASS
• 6.27 Connectivity for [u'olt5', u'vsg5'] CASE6_After - PASS
• 6.28 Connectivity for ['olt1', 'vsg1'] CASE6_After - PASS