...

1. The transmission frequency of packet_in
   We suggest the packet_in interval is 50ms, that is 20 copies of packet_in messages are send in one second, and this can be configured in IxNetwork.
2. How to shutdown the controller(ONOS)

   1. Active approach

      Code Block
      onos> system:shutdown

   2. Passive approach

      Code Block
      $ sudo killall -9 java

3. How to confirm the master role of the switch

   Code Block
   onos> devices

Preparation

• Cluster formed
  
  

  • 3 mode

    $ $ONOS_INSTALL_DIR/bin/onos-form-cluster OC1 OC2 OC3

  • 5 mode

    $ $ONOS_INSTALL_DIR/bin/onos-form-cluster OC1 OC2 OC3 OC4 OC5

  • 7 mode

    $ $ONOS_INSTALL_DIR/bin/onos-form-cluster OC1 OC2 OC3 OC4 OC5 OC6 OC7

• Features install

  onos> feature:install onos-drivers onos> feature:install onos-openflow onos> feature:install onos-openflow-base onos> feature:install onos-app-fwd

  
  

Test steps

      1. Config IxNetwork with one switch. Set the packet_in messages of the switch, the interval is 50ms, total 100000 packets, using ICMP or ARP packets.

      2. Start the controller with the features install.

      3. Start the OF protocol of the switch.

      4. Wait until all of the channels are established and Echo message interaction started.

      5. Enable packet_in and check whether the packet_in sended and packet_out received are the same.

      6. If step 5 passed, confirm the master controller of this switch, here we use Cm to represent.

      7. Start the capture of IxNetwork.

      8. Shutdown controller Cm, and wait until packet_in messages start response again.

      9. Stop the capture, analyse the messages captured and write down the result.

      10. Clean the configuration of controllers and IxNetwork.

      11. Repeat test step 1-10 for three times.

      12. Restart the test with another nodes of cluster.

Test Results

...

Image Added