Page History

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 21: Assigning Controller roles for switches -

...

FAIL

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

• 21.1 Assign mastership of switches to specific controllers - PASS
• 21.2 Check mastership was correctly assigned - PASS FAIL
• Switches were not successfully reassigned

Case 3: Adding host Intents - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 5: Setting up and gathering data for current state -

...

PASS

• 5.1 Check that each switch has a master - FAIL
Some devices don't have a master assigned
• PASS
• 5.2 Get the Mastership of each switch from each controller - FAIL
• Error in reading roles from ONOS
• PASS
• 5.3 Check for consistency in roles from each controller - PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 5.3 Check for consistency in roles Intents from each controller - FAIL
• ONOS nodes have different views of switch roles
• PASS
• 5.4 6 Get the intents flows from each controller - FAIL
Error in reading intents from ONOS
• PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Collecting topology information from ONOS - No Result
• 5.11 Host view is consistent across ONOS nodes - PASS
• 5.12 Each host has an IP address - PASS
• 5.13 Cluster view is consistent across ONOS nodes - PASS
• 5.14 Cluster view correct across ONOS nodes - PASS
• 5.15 Comparing ONOS topology to MN - PASS
• 5.16 Device information is correct - PASS
• 5.17 Links are correct - PASS
• 5.18 Hosts are correct - PASS

Case 14: Start Leadership Election app - PASS

• 14.1 Install leadership election app - PASS
• 14.2 Run for election on each node - PASS
• 14.3 First node was elected leader - PASS

Case 16: Install Primitives app - PASS

• 16.1 Install Primitives app - PASS

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

• 17.1 Increment then get a default counter on each node - PASS
• 17.2 Get then Increment a default counter on each node - PASS
• 17.3 Counters we added have the correct values - PASS
• 17.4 Add -8 to then get a default counter on each node - PASS
• 17.5 Add 5 to then get a default counter on each node - PASS
• 17.6 Get then add 5 to a default counter on each node - PASS
• 17.7 Counters we added have the correct values - PASS
• 17.8 Distributed Set get - PASS
• 17.9 Distributed Set size - PASS
• 17.10 Distributed Set add() - PASS
• 17.11 Distributed Set addAll() - PASS
• 17.12 Distributed Set contains() - PASS
• 17.13 Distributed Set containsAll() - PASS
• 17.14 Distributed Set remove() - PASS
• 17.15 Distributed Set removeAll() - PASS
• 17.16 Distributed Set addAll() - PASS
• 17.17 Distributed Set clear() - PASS
• 17.18 Distributed Set addAll() - PASS
• 17.19 Distributed Set retain() - PASS
• 17.20 Partitioned Transactional maps put - PASS
• 17.21 Partitioned Transactional maps get - PASS