Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 21.1 Assign mastership of switches to specific controllers - PASS
- 21.2 Check mastership was correctly assigned - PASS
Case 8: Compare ONOS Topology view to Mininet topology -
...
FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 5: Setting up and gathering data for current state -
...
FAIL
- 5.1 Check that each switch has a master - PASS
- 5.2 Get the Mastership of each switch from each controller - No Result
- 5.3 Read device roles from ONOS - PASS
- 5.4 Check for consistency in roles from each controller - PASS
- 5.5 Get the intents from each controller - PASS
- 5.6 Check for consistency in Intents from each controller - PASS
- 5.7 Get the flows from each controller - PASS
- 5.8 Check for consistency in Flows from each controller - PASS
- 5.9 Get the OF Table entries - No Result
- 5.10 Start continuous pings - No Result
- 5.11 Collecting topology information from ONOS - No Result
- 5.12 Host view is consistent across ONOS nodes - PASS
- 5.13 Each host has an IP address - PASS
- 5.14 Cluster view is consistent across ONOS nodes - PASS
- 5.15 Cluster view correct across ONOS nodes - PASS
- 5.16 Comparing ONOS topology to MN - PASS
- 5.17 Device information is correct - PASS
- 5.18 Links are correct - PASS FAIL
- Links are incorrect
- 5.19 Hosts are correct - PASS
...
- 61.1 Checking ONOS Logs for errors - No Result
- 61.2 Partitioning ONOS nodes - PASS
- 61.3 Sleeping 60 seconds - No Result
Case 8: Compare ONOS Topology view to Mininet topology -
...
FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
- 62.1 Deleteing firewall rules - PASS
- 62.2 Checking ONOS nodes - PASS
Case 8: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 6 SCCs
- PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - FAIL
- ONOS nodes have different views of switch roles
- 7.4 Get the intents from each controller - PASS
- 7.5 Check for consistency in Intents from each controller - PASS FAIL
- ONOS nodes have different views of intents
- 7.6 Compare current intents with intents before the failure - PASS
- 7.7 Get the OF Table entries and compare to before component failure - FAIL
- Changes were found in the flow tables
- 7.8 Leadership Election is still functional - PASS FAIL
- Something went wrong with Leadership election
Case 4: Verify connectivity by sending traffic across Intents - FAIL
...
- 9.1 Kill Link between s28 and s3 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 6 12 SCCs
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
- 10.1 Bring link between s28 and s3 back up - PASS
Case 8: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 6 12 SCCs
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
Case 11: Killing a switch to ensure it is discovered correctly - PASS
- 11.1 Kill s5 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 7 13 SCCs
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...
Case 12: Adding a switch to ensure it is discovered correctly - PASS
- 12.1 Add back s5 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 6 12 SCCs
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
...