Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/SRHA/76/

...

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)
  • 2.5 Starting Mininet Topology - PASS (tick)
  • 2.6 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 2.7 Check whether all flow status are ADDED - PASS (tick)
  • 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - FAIL (error)
    • IP connectivity failed
  • 2.9 Connectivity for [u'olt10', u'vsg10'] - FAIL (error)
    • IP connectivity failed
  • 2.10 Connectivity for [u'olt5', u'vsg5'] - FAIL (error)
    • IP connectivity failed
  • 2.11 Killing ONOS instance - PASS (tick)FAIL (error)
    • Failed to turn off ONOS Instance
  • 2.12 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Failure1 - FAIL (error)
    • IP connectivity failed
  • 2.13 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure1 - FAIL (error)
    • IP connectivity failed
  • 2.14 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure1 - FAIL (error)
    • IP connectivity failed
  • 2.15 Recovering ONOS instance - PASS (tick)
  • 2.16 Checking if ONOS CLI is ready - PASS (tick)
  • 2.17 Checking ONOS nodes - PASS (tick)
  • 2.18 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 2.19 Check whether all flow status are ADDED - PASS (tick)
  • 2.20 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 2.21 Connectivity for [u'olt10', u'vsg10'] CASE2_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 2.22 Connectivity for [u'olt5', u'vsg5'] CASE2_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 2.23 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 2.24 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Failure2 - FAIL (error)
    • IP connectivity failed
  • 2.25 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure2 - FAIL (error)
    • IP connectivity failed
  • 2.26 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure2 - FAIL (error)
    • IP connectivity failed
  • 2.27 Recovering ONOS instance - PASS (tick)
  • 2.28 Checking if ONOS CLI is ready - PASS (tick)
  • 2.29 Checking ONOS nodes - PASS (tick)
  • 2.30 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 2.31 Check whether all flow status are ADDED - PASS (tick)
  • 2.32 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 2.33 Connectivity for [u'olt10', u'vsg10'] CASE2_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 2.34 Connectivity for [u'olt5', u'vsg5'] CASE2_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 2.35 Killing ONOS instance - PASS (tick)
  • 2.36 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Failure3 - FAIL (error)
    • IP connectivity failed
  • 2.37 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure3 - FAIL (error)
    • IP connectivity failed
  • 2.38 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure3 - FAIL (error)
    • IP connectivity failed
  • 2.39 Recovering ONOS instance - PASS (tick)
  • 2.40 Checking if ONOS CLI is ready - PASS (tick)
  • 2.41 Checking ONOS nodes - PASS (tick)
  • 2.42 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 2.43 Check whether all flow status are ADDED - PASS (tick)
  • 2.44 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE2_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 2.45 Connectivity for [u'olt10', u'vsg10'] CASE2_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 2.46 Connectivity for [u'olt5', u'vsg5'] CASE2_Recovery3 - FAIL (error)
    • IP connectivity failed

...

  • 3.1 Create and Apply cell file - PASS (tick)
  • 3.2 Create and Install ONOS package - PASS (tick)
  • 3.3 Starting ONOS service - PASS (tick)
  • 3.4 Checking if ONOS CLI is ready - PASS (tick)
  • 3.5 Starting Mininet Topology - PASS (tick)
  • 3.6 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 3.7 Check whether all flow status are ADDED - PASS (tick)
  • 3.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - FAIL (error)
    • IP connectivity failed
  • 3.9 Connectivity for [u'olt10', u'vsg10'] - FAIL (error)
    • IP connectivity failed
  • 3.10 Connectivity for [u'olt5', u'vsg5'] - FAIL (error)
    • IP connectivity failed
  • 3.11 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 3.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Failure1 - FAIL (error)
    • IP connectivity failed
  • 3.13 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure1 - FAIL (error)
    • IP connectivity failed
  • 3.14 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure1 - FAIL (error)
    • IP connectivity failed
  • 3.15 Recovering ONOS instance - PASS (tick)
  • 3.16 Checking if ONOS CLI is ready - PASS (tick)
  • 3.17 Checking ONOS nodes - PASS (tick)
  • 3.18 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 3.19 Check whether all flow status are ADDED - PASS (tick)
  • 3.20 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 3.21 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 3.22 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 3.23 Killing ONOS instance - PASS (tick)FAIL (error)
    • Failed to turn off ONOS Instance
  • 3.24 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Failure2 - FAIL (error)
    • IP connectivity failed
  • 3.25 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure2 - FAIL (error)
    • IP connectivity failed
  • 3.26 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure2 - FAIL (error)
    • IP connectivity failed
  • 3.27 Recovering ONOS instance - PASS (tick)
  • 3.28 Checking if ONOS CLI is ready - PASS (tick)
  • 3.29 Checking ONOS nodes - PASS (tick)
  • 3.30 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 3.31 Check whether all flow status are ADDED - PASS (tick)
  • 3.32 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 3.33 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 3.34 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 3.35 Killing ONOS instance - FAIL (error)
  • Failed to turn off ONOS Instance
  • PASS (tick)
  • 3.36 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Failure3 - FAIL (error)
    • IP connectivity failed
  • 3.37 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure3 - FAIL (error)
    • IP connectivity failed
  • 3.38 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure3 - FAIL (error)
    • IP connectivity failed
  • 3.39 Recovering ONOS instance - PASS (tick)
  • 3.40 Checking if ONOS CLI is ready - PASS (tick)
  • 3.41 Checking ONOS nodes - PASS (tick)
  • 3.42 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 3.43 Check whether all flow status are ADDED - PASS (tick)
  • 3.44 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 3.45 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 3.46 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery3 - FAIL (error)
    • IP connectivity failed

...

  • 6.1 Create and Apply cell file - PASS (tick)
  • 6.2 Create and Install ONOS package - PASS (tick)
  • 6.3 Starting ONOS service - PASS (tick)
  • 6.4 Checking if ONOS CLI is ready - PASS (tick)
  • 6.5 Starting Mininet Topology - PASS (tick)
  • 6.6 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.7 Check whether all flow status are ADDED - PASS (tick)
  • 6.8 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - FAIL (error)
    • IP connectivity failed
  • 6.9 Connectivity for [u'olt10', u'vsg10'] - FAIL (error)
    • IP connectivity failed
  • 6.10 Connectivity for [u'olt5', u'vsg5'] - FAIL (error)
    • IP connectivity failed
  • 6.11 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 6.12 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.13 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.14 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.15 Kill spine101 spine102 - PASS (tick)
  • 6.16 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.17 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.18 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 6.19 Recovering spine101 spine102 - PASS (tick)
  • 6.20 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.21 Check whether all flow status are ADDED - PASS (tick)
  • 6.22 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.23 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.24 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.25 Recovering ONOS instance - PASS (tick)
  • 6.26 Checking if ONOS CLI is ready - PASS (tick)
  • 6.27 Checking ONOS nodes - PASS (tick)
  • 6.28 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.29 Check whether all flow status are ADDED - PASS (tick)
  • 6.30 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.31 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.32 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 6.33 Killing ONOS instance - PASS (tick)FAIL (error)
    • Failed to turn off ONOS Instance
  • 6.34 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.35 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.36 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.37 Kill spine102 - PASS (tick)
  • 6.38 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.39 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.40 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 6.41 Recovering spine102 - PASS (tick)
  • 6.42 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.43 Check whether all flow status are ADDED - PASS (tick)
  • 6.44 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.45 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.46 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.47 Recovering ONOS instance - PASS (tick)
  • 6.48 Checking if ONOS CLI is ready - PASS (tick)
  • 6.49 Checking ONOS nodes - PASS (tick)
  • 6.50 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.51 Check whether all flow status are ADDED - PASS (tick)
  • 6.52 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.53 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.54 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 6.55 Killing ONOS instance - FAIL (error)
  • Failed to turn off ONOS Instance
  • PASS (tick)
  • 6.56 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.57 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.58 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.59 Kill spine101 spine102 - PASS (tick)
  • 6.60 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.61 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.62 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 6.63 Recovering spine101 spine102 - PASS (tick)
  • 6.64 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.65 Check whether all flow status are ADDED - PASS (tick)
  • 6.66 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 6.67 Connectivity for [u'olt10', u'vsg10'] CASE6_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 6.68 Connectivity for [u'olt5', u'vsg5'] CASE6_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 6.69 Recovering ONOS instance - PASS (tick)
  • 6.70 Checking if ONOS CLI is ready - PASS (tick)
  • 6.71 Checking ONOS nodes - PASS (tick)
  • 6.72 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 6.73 Check whether all flow status are ADDED - PASS (tick)
  • 6.74 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE6_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 6.75 Connectivity for [u'olt10', u'vsg10'] CASE6_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 6.76 Connectivity for [u'olt5', u'vsg5'] CASE6_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed

...

  • 7.1 Create and Apply cell file - PASS (tick)
  • 7.2 Create and Install ONOS package - PASS (tick)
  • 7.3 Starting ONOS service - PASS (tick)
  • 7.4 Checking if ONOS CLI is ready - PASS (tick)
  • 7.5 Starting Mininet Topology - PASS (tick)
  • 7.6 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.7 Check whether all flow status are ADDED - PASS (tick)
  • 7.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - FAIL (error)
    • IP connectivity failed
  • 7.9 Connectivity for [u'olt10', u'vsg10'] - FAIL (error)
    • IP connectivity failed
  • 7.10 Connectivity for [u'olt5', u'vsg5'] - FAIL (error)
    • IP connectivity failed
  • 7.11 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 7.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.13 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.14 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.15 Kill spine101 - PASS (tick)
  • 7.16 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.17 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.18 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 7.19 Recovering spine101 - PASS (tick)FAIL (error)
    • Failed to recover switch?
  • 7.20 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.21 Check whether all flow status are ADDED - PASS (tick)
  • 7.22 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.23 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.24 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.25 Recovering ONOS instance - PASS (tick)
  • 7.26 Checking if ONOS CLI is ready - PASS (tick)
  • 7.27 Checking ONOS nodes - PASS (tick)
  • 7.28 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.29 Check whether all flow status are ADDED - PASS (tick)
  • 7.30 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.31 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.32 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 7.33 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • PASS (tick)
  • 7.34 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.35 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.36 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.37 Kill spine102 - FAIL (error)
  • Failed to kill switch?
  • PASS (tick)
  • 7.38 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.39 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.40 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 7.41 Recovering spine102 - FAIL (error)
  • Failed to recover switch?
  • PASS (tick)
  • 7.42 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.43 Check whether all flow status are ADDED - PASS (tick)
  • 7.44 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.45 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.46 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.47 Recovering ONOS instance - PASS (tick)
  • 7.48 Checking if ONOS CLI is ready - PASS (tick)
  • 7.49 Checking ONOS nodes - PASS (tick)
  • 7.50 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.51 Check whether all flow status are ADDED - PASS (tick)
  • 7.52 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.53 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.54 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 7.55 Killing ONOS instance - PASS (tick)
  • 7.56 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.57 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.58 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.59 Kill spine103 - PASS (tick)
  • 7.60 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.61 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.62 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 7.63 Recovering spine103 - PASS (tick)
  • 7.64 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.65 Check whether all flow status are ADDED - PASS (tick)
  • 7.66 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 7.67 Connectivity for [u'olt10', u'vsg10'] CASE7_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 7.68 Connectivity for [u'olt5', u'vsg5'] CASE7_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 7.69 Recovering ONOS instance - PASS (tick)
  • 7.70 Checking if ONOS CLI is ready - PASS (tick)
  • 7.71 Checking ONOS nodes - PASS (tick)
  • 7.72 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 7.73 Check whether all flow status are ADDED - PASS (tick)
  • 7.74 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE7_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 7.75 Connectivity for [u'olt10', u'vsg10'] CASE7_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 7.76 Connectivity for [u'olt5', u'vsg5'] CASE7_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed

...

  • 8.1 Create and Apply cell file - PASS (tick)
  • 8.2 Create and Install ONOS package - PASS (tick)
  • 8.3 Starting ONOS service - PASS (tick)
  • 8.4 Checking if ONOS CLI is ready - PASS (tick)
  • 8.5 Starting Mininet Topology - PASS (tick)
  • 8.6 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.7 Check whether all flow status are ADDED - PASS (tick)
  • 8.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - FAIL (error)
    • IP connectivity failed
  • 8.9 Connectivity for [u'olt10', u'vsg10'] - FAIL (error)
    • IP connectivity failed
  • 8.10 Connectivity for [u'olt5', u'vsg5'] - FAIL (error)
    • IP connectivity failed
  • 8.11 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 8.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.13 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.14 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.15 Kill spine102 spine104 - PASS (tick)
  • 8.16 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.17 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.18 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Failure1 - FAIL (error)
    • IP connectivity failed
  • 8.19 Recovering spine102 spine104 - PASS (tick)
  • 8.20 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.21 Check whether all flow status are ADDED - PASS (tick)
  • 8.22 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.23 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.24 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.25 Recovering ONOS instance - PASS (tick)
  • 8.26 Checking if ONOS CLI is ready - PASS (tick)
  • 8.27 Checking ONOS nodes - PASS (tick)
  • 8.28 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.29 Check whether all flow status are ADDED - PASS (tick)
  • 8.30 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.31 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.32 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Recovery1 - FAIL (error)
    • IP connectivity failed
  • 8.33 Killing ONOS instance - PASS (tick)
  • 8.34 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.35 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.36 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.37 Kill spine104 spine101 - PASS (tick)
  • 8.38 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.39 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.40 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Failure2 - FAIL (error)
    • IP connectivity failed
  • 8.41 Recovering spine104 spine101 - PASS (tick)
  • 8.42 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.43 Check whether all flow status are ADDED - PASS (tick)
  • 8.44 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.45 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.46 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.47 Recovering ONOS instance - PASS (tick)
  • 8.48 Checking if ONOS CLI is ready - PASS (tick)
  • 8.49 Checking ONOS nodes - PASS (tick)
  • 8.50 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.51 Check whether all flow status are ADDED - PASS (tick)
  • 8.52 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.53 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.54 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Recovery2 - FAIL (error)
    • IP connectivity failed
  • 8.55 Killing ONOS instance - FAIL (error)
    • Failed to turn off ONOS Instance
  • 8.56 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.57 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.58 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.59 Kill spine101 spine103 - PASS (tick)
  • 8.60 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.61 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.62 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Failure3 - FAIL (error)
    • IP connectivity failed
  • 8.63 Recovering spine101 spine103 - PASS (tick)
  • 8.64 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.65 Check whether all flow status are ADDED - PASS (tick)
  • 8.66 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 8.67 Connectivity for [u'olt10', u'vsg10'] CASE8_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 8.68 Connectivity for [u'olt5', u'vsg5'] CASE8_SWITCH_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 8.69 Recovering ONOS instance - PASS (tick)
  • 8.70 Checking if ONOS CLI is ready - PASS (tick)
  • 8.71 Checking ONOS nodes - PASS (tick)
  • 8.72 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 8.73 Check whether all flow status are ADDED - PASS (tick)
  • 8.74 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE8_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 8.75 Connectivity for [u'olt10', u'vsg10'] CASE8_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed
  • 8.76 Connectivity for [u'olt5', u'vsg5'] CASE8_ONOS_Recovery3 - FAIL (error)
    • IP connectivity failed