...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 7: Running ONOS Constant State Tests -
...
PASS
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents and compare across all nodes - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Compare current intents with intents before the failure - PASS
- 7.7 Get the OF Table entries and compare to before component failure - FAIL Changes were found in the flow tables
- PASS
- 7.8 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - FAIL Intents have not been installed correctly, pings failed.
- PASS
Case 15: Check that Leadership Election is still functional - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 7: Running ONOS Constant State Tests -
...
PASS
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents and compare across all nodes - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Compare current intents with intents before the failure - PASS
- 7.7 Get the OF Table entries and compare to before component failure - FAIL
- Changes were found in the flow tables
- PASS
- 7.8 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - FAIL Intents have not been installed correctly, pings failed.
- PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - FAIL Intents have not been installed correctly, pings failed.
- PASS
Case 15: Check that Leadership Election is still functional - PASS
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
...