Page History

...

commit c60c7e26b0f7ee487b56e3fc609b01ecb6f81ba9 053682b8cf73e1500c3c126d04be840bd7991226 (HEAD, origin/onos-1.11, onos-1.11)
Author: Kalhee Kim Yi Tseng [Kalheeyi@opennetworking.Kim@nokia.comorg]
AuthorDate: Wed Thu Nov 1 179 13:5654:44 12 2017 +0000-0800
Commit: Yi Tseng Charles Chan [yi@opennetworkingrascov@gmail.orgcom]
CommitDate: Fri Nov 3 1910 12:4735:24 14 2017 +0000-0800

[CORD-2066] Router to indirect IPv6 addresses are unresolvable2228] Fix concurrent error when reactivate DHCP relay

<iframe src="https://onos-jenkins.onlab.us/job/HAkillNodes/plot/Plot-HA/getPlot?index=2&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 62.1 Restarting 2 ONOS nodes - PASS
• 62.2 Checking if ONOS is up yet - PASS
• 62.3 Restarting ONOS nodes - PASS
• 62.4 Checking ONOS nodes - PASS
• 62.5 Rerun for election on the node(s) that were killed - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests - PASS

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - PASS
• 7.7 Get the OF Table entries and compare to before component failure - PASS
• 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 15: Check that Leadership Election is still functional - PASS

• 15.1 Run for election on each node - PASS
• 15.2 Check that each node shows the same leader and candidates - PASS
• 15.3 Find current leader and withdraw - PASS
• 15.4 Check that a new node was elected leader - PASS
• 15.5 Check that that new leader was the candidate of old leader - PASS
• 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS
• 15.7 Check that oldLeader is a candidate, and leader if only 1 node - PASS

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

• 17.1 Increment then get a default counter on each node - PASS
• 17.2 Get then Increment a default counter on each node - PASS
• 17.3 Counters we added have the correct values - PASS
• 17.4 Add -8 to then get a default counter on each node - PASS
• 17.5 Add 5 to then get a default counter on each node - PASS
• 17.6 Get then add 5 to a default counter on each node - PASS
• 17.7 Counters we added have the correct values - PASS
• 17.8 Distributed Set get - PASS
• 17.9 Distributed Set size - PASS
• 17.10 Distributed Set add() - PASS
• 17.11 Distributed Set addAll() - PASS
• 17.12 Distributed Set contains() - PASS
• 17.13 Distributed Set containsAll() - PASS
• 17.14 Distributed Set remove() - PASS
• 17.15 Distributed Set removeAll() - PASS
• 17.16 Distributed Set addAll() - PASS
• 17.17 Distributed Set clear() - PASS
• 17.18 Distributed Set addAll() - PASS
• 17.19 Distributed Set retain() - PASS
• 17.20 Partitioned Transactional maps put - PASS
• 17.21 Partitioned Transactional maps get - PASS
• 17.22 Get the value of a new value - PASS
• 17.23 Atomic Value set() - PASS
• 17.24 Get the value after set() - PASS
• 17.25 Atomic Value compareAndSet() - PASS
• 17.26 Get the value after compareAndSet() - PASS
• 17.27 Atomic Value getAndSet() - PASS
• 17.28 Get the value after getAndSet() - PASS
• 17.29 Atomic Value destory() - PASS
• 17.30 Get the value after destroy() - PASS
• 17.31 Work Queue add() - PASS
• 17.32 Check the work queue stats - PASS
• 17.33 Work Queue addMultiple() - PASS
• 17.34 Check the work queue stats - PASS
• 17.35 Work Queue takeAndComplete() 1 - PASS
• 17.36 Check the work queue stats - PASS
• 17.37 Work Queue takeAndComplete() 2 - PASS
• 17.38 Check the work queue stats - PASS
• 17.39 Work Queue destroy() - PASS
• 17.40 Check the work queue stats - PASS

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 13: Test Cleanup - PASS

• 13.1 Checking raft log size - PASS
• 13.2 Killing tcpdumps - No Result
• 13.3 Stopping Mininet - PASS
• 13.4 Checking ONOS Logs for errors - No Result