Page History

...

commit 3d650a65880a1ce04ff4c14ff367627ed152c430 4a9a671c76c745917ee2a9f39a9a65cf56d526d5 (HEAD, origin/master, origin/HEAD, master)
Author: Charles Chan Jonghwan Hyun [rascov@gmailjonghwan@opennetworking.comorg]
AuthorDate: Mon Nov 20 0813 14:4643:24 55 2017 -0800
Commit: Charles Chan Carmelo Cascone [charles@opennetworkingcarmelo@opennetworking.org]
CommitDate: Tue Thu Nov 21 0123 00:2350:49 32 2017 +0000
Dual-homing redirection fix
--
This commit fixes the bug that prevent initial redirection from happening if the host is added without IP and get updated with an IP later
Change-Id: Ic4e90763e38eff94b1613d90f943f76f5285cf94

[ONOS-7154] Initial INT pipeline implementation

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - PASS
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
Bandwidth Allocation check Failed
• PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

...

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent

...

• PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Failed
• PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

PASS

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Passed
• Encapsulation intents check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Failed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Failed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received PassedPingall Failed
• Remove Intents FailedPassed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents FailedPassed

Case

...

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Encapsulation intents check failed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

...

3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

FAIL

This test case will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000 2000.1 NOOPTION: Install and test single point to multi Add point intents between h1 and h9 - PASS 3000
• 2000.2 IPV4: Install and test single point to multi point intents Add point intents between h1 and h9 - PASS 3000
• 2000.3 IPV4_2Protected: Add single point to multi point intents - PASS 3000.4 VLAN: Add single point to multi point between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 intents - PASS
• 3000 2000.5 VLANSDNIP-ICMP: Add single point to multi point intents between h1 and h9 - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• Initial Iperf Passed
• Remove Intents Failed
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• Assertion results for NOOPTION multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down
• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 3 OVS running in Mininet and compile intents using Flow ObjectivesRules

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test -

...

1 NODE(S) - OF 1.

...

3 - Using Flow

...

Rules -

...

PASS

This test case will test point to point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 3 OVS running in Mininet and compile intents using Flow ObjectivesRules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• PASS
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test -

...

1 NODE(S) - OF 1.

...

3 - Using Flow

...

Rules - PASS

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 3 OVS running in Mininet and compile intents using Flow ObjectivesRules

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test -

...

1 NODE(S) - OF 1.

...

3 - Using Flow

...

Rules -

...

PASS

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 3 OVS running in Mininet and compile intents using Flow ObjectivesRules

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• PASS

Case 5000: Test host mobility with host intents -

...

1 NODE(S) - OF 1.

...

3 - Using Flow

...

Rules - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure -

...

1 NODE(S) - OF 1.

...

3 - Using Flow

...

Rules -

...

PASS

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

• PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Failed
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 3 This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000 2000.1 IPV4NOOPTION: Add host point intents between h1 and h9 - PASS 1000
• 2000.2 DUALSTACK1IPV4: Add host point intents between h3 h1 and h11 h9 - PASS
• 1000 2000.3 DUALSTACK2Protected: Add host point intents between h1 and h11 h9 - PASS 1000
• 2000.4 1HOPIPV4_2: Add host point intents between h1 and h3 h9 - PASS
• 1000 2000.5 VLAN1SDNIP-ICMP: Add vlan host point intents between h4 h1 and h12 h9 - PASS 1000
• 2000.6 VLAN2SDNIP-TCP: Add vlan host point intents between h4 h1 and h13 h9 - PASS 1000
• 2000.7 EncapsulationDUALSTACK1: Add host point intents between h1 h3 and h9 h11 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged 2000.8 VLAN: Add point intents between h5 and h21 - PASS

...

• 2000

...

• .9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000 3000.1 NOOPTION: Add Install and test single point to multi point intents between h1 and h9 - PASS 2000
• 3000.2 IPV4: Add Install and test single point to multi point intents between h1 and h9 - PASS 2000
• 3000.3 ProtectedIPV4_2: Add single point intents between h1 and h9 to multi point intents - PASS 2000
• 3000.4 IPV4_2VLAN: Add single point intents between h1 and h9 to multi point intents - PASS 2000
• 3000.5 SDNIP-ICMPVLAN: Add single point to multi point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

...

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test
• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS 3000
• 6000.4 VLANNOOPTION: Add Install and test single point to multi point intents with partial failures allowed - PASS 3000.5 VLAN: Add single point to multi point intents

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case

...

2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesONOS cluster

• 2.1 Apply cell to environment 4000.1 NOOPTION: Add multi point to single point intents - PASS 4000
• 2.2 IPV4: Add multi point to single point intents Uninstalling ONOS package - PASS 4000
• 2.3 IPV4_2: Add multi point to single point intents Creating ONOS package - PASS 4000
• 2.4 VLAN: Add multi point to single point intents Installing ONOS package - PASS 4000
• 2.5 VLAN: Add multi point to single point intents Set up ONOS secure SSH - PASS 4000.6 ENCAPSULATION: Add multi point to single point intents
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case

...

11: Start Mininet topology with OF 1.3 switches -

...

PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches
• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case

...

12:

...

Assign switches to controllers - PASS

Assign OF 1.3

...

switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components
• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case

...

15: Discover all hosts using scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 18 15.2 Stopping Mininet Populate hostsData - PASS

Case

...

16: Balance mastership of switches - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs 16.1 Balancing mastership of switches - PASS

Case

...

17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesObjectives

• 1000 2000.1 IPV4NOOPTION: Add host point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 host intent with mac addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed
• PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
• protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check
• Assertion Result for dualstack2 host intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State PassedFailed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall PassedFailed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Pingall Scapy Packet Received Passed
• Remove Intents Passed
• 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
• Assertion Result for 1HOP for IPV4 same switch
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
• Assertion Result vlan IPV4
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - FAIL
• Assertion Result vlan IPV4
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Bad Sender Ping Passed
• Bad Recipient
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Passed
• Encapsulation intents check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Pingall Scapy Packet Received Passed
• Remove Intents Passed
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow

...

Objectives -

...

PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Down Pingall Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed 2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall Connectivity Check PassedLink Up
• Isolation link Down Passed
• Link Up Partial failure isolation link Down Intent State PassedLink Up
• Partial failure isolation link Down Flow State Failed
• Partial failure isolation link Down PassedLink Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Encapsulation intents check Passed
• Flow duration check Passed
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link down Scapy Packet Received Passed
• Protected Intent Check Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.4 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.8 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 with mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.9 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 point intents with VLAN treatment
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.10 1HOP: Add point intents between h1 and h3 - FAIL
• Assertion Result for 1HOP IPV4 with no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping PassedFailed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall PassedFailed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.11 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Encapsulation intents check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.12 12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State PassedFailed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall PassedFailed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow

...

Objectives -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesObjectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• PASS
• 3000.2 IPV4: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN 3000.3 IPV4_2: Add single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• PASS
• 3000.5 3000.4 VLAN: Add single point to multi point intents - FAIL PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State FailedPassed
• Link Down Pingall PassedFailed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State FailedPassed
• Link Up Scapy Packet Received PassedRecieved Failed
• Remove Intents Passed
• 3000.5 VLAN: Add single point to multi point intents - FAIL
• Assertion results for single to multi point intent with VLAN treatment
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• Assertion results for NOOPTION multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.2 IPV4: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.3 IPV4_2: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.4 VLAN: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.5 VLAN: Add multi point to single point intents - FAIL
• Assertion results for multi to single point intent with VLAN ID treatment
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Pingall Passed
• Remove Intents Passed

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Connectivity Check Failed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Connectivity Check Failed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Connectivity Check Failed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Failed
• Link Down Connectivity Check Failed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Failed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Encapsulation intents check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Failed
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• 2000.4 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point Intent
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 3000.5 VLAN: Add single point to multi point intents - FAIL
• Assertion results for single to multi point intent with VLAN treatment
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.3 IPV4_2: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.4 VLAN: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.5 VLAN: Add multi point to single point intents - FAIL
• Assertion results for multi to single point intent with VLAN ID treatment
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
• Assertion results for VLAN Encapsulation multi to single point intent

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Failed

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Failed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Failed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Failed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Failed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
Remove Intents Failed

Case 18: Stop Mininet and Scapy - PASS

...