Page History

...

commit 8f49a73a0d803da6a4b9c7587b98b1860417b26c bbcd6a701c943d3688af70bf981361accd67685b (HEAD, origin/onos-1.11, onos-1.11)
Author: Yi Tseng Ray Milkey [yi@opennetworkingray@opennetworking.org]
AuthorDate: Fri Wed Nov 17 1722 19:1403:41 05 2017 -0800
Commit: Yi Tseng Ray Milkey [yi@opennetworkingray@opennetworking.org]
CommitDate: Fri Wed Nov 17 1722 19:3703:13 05 2017 -0800
Fix NPE of DHCP relay
Starting snapshot 1.11.2-SNAPSHOT

<iframe src="https://onos-jenkins.onlab.us/job/HAkillNodes/plot/Plot-HA/getPlot?index=2&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests -

...

PASS

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - FAIL
• The Intents changed during failure
• PASS
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
Changes were found in the flow tables
• PASS
• 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.2 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests -

...

PASS

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - FAIL
• The Intents changed during failure
• PASS
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• PASS
• 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.2 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 13: Test Cleanup - PASS

...