Page History

...

<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/HAfullNetPartition_master_20-builds_graph.jpg", alt="HAfullNetPartition", style="width:525px;height:350px;border:0">

commit 225e2b0f3a6767211f828f8480edf314058d4cb4 9ef930aa75aacbd6c7f9af0bc7ede872b6402ded (HEAD, origin/master, origin/HEAD, master)
Author: alessio Andrea Campanella [alessioandrea@opennetworking.giorgetti@gmail.comorg]
AuthorDate: Wed Oct 28 17:44:44 Fri Nov 6 21:41:01 2020 +0100
Commit: Pier Luigi Ventre [pier@opennetworkingAndrea Campanella [andrea@opennetworking.org]
CommitDate: Thu Wed Nov 5 1411 19:4806:24 10 2020 +0000
Extend EncapsulationConstraint to include a suggested value of the Identifier.
Offload OF Port Status message processing to a single thread executor.
--
(cherry picked from commit dad65ac5a058242326fe91fbe47e65fa9c5a3583)

Case 1: Constructing test variables and building ONOS package - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests -

...

PASS

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - PASS
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
Changes were found in the flow tables
• PASS
• 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• 4.4 Wait a minute then ping again - PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 62.1 Deleteing firewall rules - PASS
• 62.2 Checking ONOS nodes - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 14 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests - FAIL

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - FAIL
• ONOS nodes have different views of switch roles
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - PASS FAIL
• The Intents changed during failure
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• 7.8 Leadership Election is still functional - FAIL
• Something went wrong with Leadership election

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS FAIL
• Intents are not all in INSTALLED state
• 4.2 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

...

• 9.1 Kill Link between s28 and s3 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 13 25 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

• 10.1 Bring link between s28 and s3 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 13 25 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 14 26 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 13 25 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...