Page History

...

<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/HAfullNetPartition_master_20-builds_graph.jpg", alt="HAfullNetPartition", style="width:525px;height:350px;border:0">

commit 517597a84982c38883e552771bbb105756b73aaa c44ccc7dd03f06d81ddd60791f87aae634cc85ab (HEAD, origin/master, origin/HEAD, master)
Author: Jian Li pierventre [pyguni@gmailpier@opennetworking.comorg]
AuthorDate: Mon Mar 22 22 11:0417:52 21 2021 +09000100
Commit: Jian Li [pyguni@gmail.comPier Luigi Ventre [pier@opennetworking.org]
CommitDate: Mon Wed Mar 22 0724 15:1317:54 20 2021 +0000
Dynamically add or remove gateway node according to GW annotation
[AETHER-1324] Force push pipeline config
--
(cherry picked from commit 91358d6126e13adcc4e4b8c7bbd46179fb4c2913ce191fe9983698b3988bee8e6e8c41382ab1fce3)

Case 1: Constructing test variables and building ONOS package - PASS

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests -

...

FAIL

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Compare current intents with intents before the failure - PASS
• 7.7 Get the OF Table entries and compare to before component failure - PASS FAIL
• Changes were found in the flow tables
• 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS again - FAIL
• Intents have not been installed correctly, pings failed.

Case 15: Check that Leadership Election is still functional - PASS

...

• 62.1 Deleteing firewall rules - PASS
• 62.2 Checking ONOS nodes - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS FAIL
• ONOS nodes have different views of clusters
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests - FAIL

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - FAIL
ONOS nodes have different views of switch roles
• PASS
• 7.4 Get the intents from each controller - PASS
• 7.5 Check for consistency in Intents from each controller - FAIL
• ONOS nodes have different views of intents
• 7.6 Compare current intents with intents before the failure - FAIL
• The Intents changed during failure
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• 7.8 Leadership Election is still functional - FAIL
Something went wrong with Leadership election
• PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

• 9.1 Kill Link between s28 and s3 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 25 13 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

• 10.1 Bring link between s28 and s3 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 25 13 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 26 14 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 25 13 SCCs
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...