Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://jenkins.onosproject.org/job/USECASE-pipeline-2.0/1014/

...

  • 7.1 Stop sw32 - PASS (tick)
  • 7.2 Check routes installed - PASS (tick)
  • 7.3 Check M2S intents installed - PASS (tick)
  • 7.4 Check P2P intents installed - PASS (tick)
  • 7.5 Check ping between hosts behind BGP peers - PASS (tick)
  • 7.6 Check ping between BGP peers and speakers - PASS (tick)
  • 7.7 Check whether all flow status are ADDED - PASS (tick)

Case 8: Start the edge sw32, check P-2-P and M-2-S intents, ping test - PASS

  • 8.1 Start sw32 - PASS (tick)
  • 8.2 Check routes installed - PASS (tick)
  • 8.3 Check M2S intents installed - PASS (tick)
  • 8.4 Check P2P intents installed - PASS (tick)
  • 8.5 Check whether all flow status are ADDED - PASS (tick)
  • 8.6 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 8.7 Check ping between each host pair, expect all to succede=True - PASS (tick)

Case 9: Stop sw11 located in best path, check route number, P2P intent number, M2S intent number, ping test - PASS

  • 9.1 Check flow entry number in sw11 - PASS (tick)
  • 9.2 Check flow entry number in sw1 - PASS (tick)
  • 9.3 Check flow entry number in sw7 - PASS (tick)
  • 9.4 Stop sw11 - PASS (tick)
  • 9.5 Check routes installed - PASS (tick)
  • 9.6 Check M2S intents installed - PASS (tick)
  • 9.7 Check P2P intents installed - PASS (tick)
  • 9.8 Check whether all flow status are ADDED - PASS (tick)
  • 9.9 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 9.10 Check ping between each host pair, expect all to succede=True - PASS (tick)

Case 10: Start sw11 which was stopped in CASE9, check route number, P2P intent number, M2S intent number, ping test - FAIL

  • 10.1 Check flow entry number in sw1 - FAIL (error)
    • Flow number in sw1 is wrong!
  • 10.2 Check flow entry number in sw7 - FAIL (error)
    • Flow number in sw7 is wrong!
  • 10.3 Start sw11 - PASS (tick)
  • 10.4 Check routes installed - PASS (tick)
  • 10.5 Check M2S intents installed - PASS (tick)
  • 10.6 Check P2P intents installed - PASS (tick)
  • 10.7 Check whether all flow status are ADDED - PASS (tick)
  • 10.8 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 10.9 Check ping between each host pair, expect all to succede=True - PASS (tick)