Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 8.1 Create TestONTopology object - PASS
- 8.2 Comparing ONOS topology to MN - No Result
- 8.3 Collecting topology information from ONOS - PASS
- 8.4 Hosts view is consistent across all ONOS nodes - PASS
- 8.5 Hosts information is correct - PASS
- 8.6 Host attachment points to the network - PASS
- 8.7 Clusters view is consistent across all ONOS nodes - PASS
- 8.8 There is only one SCC - PASS
- 8.9 Device information is correct - PASS
- 8.10 Port information is correct - PASS
- 8.11 Links are correct - PASS
- 8.12 Checking ONOS nodes - PASS
Case 7: Running ONOS Constant State Tests -
...
FAIL
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Compare switch roles from before failure - PASS FAIL
- Mastership of some switches changed
- 7.5 Get the intents and compare across all nodes - PASS
- 7.6 Check for consistency in Intents from each controller - PASS
- 7.7 Compare current intents with intents before the failure - PASS
- 7.8 Get the OF Table entries and compare to before component failure - PASS
- 7.9 Check the continuous pings to ensure that no packets were dropped during component failure - PASS
- 7.10 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS FAIL
- Some topics were lost
- 4.4 Wait a minute then ping again - PASS
...
- 8.1 Create TestONTopology object - PASS
- 8.2 Comparing ONOS topology to MN - No Result
- 8.3 Collecting topology information from ONOS - PASS
- 8.4 Hosts view is consistent across all ONOS nodes - PASS
- 8.5 Hosts information is correct - PASS
- 8.6 Host attachment points to the network - PASS
- 8.7 Clusters view is consistent across all ONOS nodes - PASS
- 8.8 There is only one SCC - PASS
- 8.9 Device information is correct - PASS
- 8.10 Port information is correct - PASS
- 8.11 Links are correct - PASS
- 8.12 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS FAIL
- Some topics were lost
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 10: Restore a link to ensure that Link Discovery is working properly - PASS
...
- 8.1 Create TestONTopology object - PASS
- 8.2 Comparing ONOS topology to MN - No Result
- 8.3 Collecting topology information from ONOS - PASS
- 8.4 Hosts view is consistent across all ONOS nodes - PASS
- 8.5 Hosts information is correct - PASS
- 8.6 Host attachment points to the network - PASS
- 8.7 Clusters view is consistent across all ONOS nodes - PASS
- 8.8 There is only one SCC - PASS
- 8.9 Device information is correct - PASS
- 8.10 Port information is correct - PASS
- 8.11 Links are correct - PASS
- 8.12 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS FAIL
- Some topics were lost
- 4.4 Wait a minute then ping again - PASS
...
- 8.1 Create TestONTopology object - PASS
- 8.2 Comparing ONOS topology to MN - No Result
- 8.3 Collecting topology information from ONOS - PASS
- 8.4 Hosts view is consistent across all ONOS nodes - PASS
- 8.5 Hosts information is correct - PASS
- 8.6 Host attachment points to the network - PASS
- 8.7 Clusters view is consistent across all ONOS nodes - PASS
- 8.8 There is only one SCC - PASS
- 8.9 Device information is correct - PASS
- 8.10 Port information is correct - PASS
- 8.11 Links are correct - PASS
- 8.12 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS FAIL
- Some topics were lost
- 4.4 Wait a minute then ping again - PASS
...
- 8.1 Create TestONTopology object - PASS
- 8.2 Comparing ONOS topology to MN - No Result
- 8.3 Collecting topology information from ONOS - PASS
- 8.4 Hosts view is consistent across all ONOS nodes - PASS
- 8.5 Hosts information is correct - PASS
- 8.6 Host attachment points to the network - PASS
- 8.7 Clusters view is consistent across all ONOS nodes - PASS
- 8.8 There is only one SCC - PASS
- 8.9 Device information is correct - PASS
- 8.10 Port information is correct - PASS
- 8.11 Links are correct - PASS
- 8.12 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS FAIL
- Some topics were lost
- 4.4 Wait a minute then ping again - PASS
...