Page History

...

commit 0b8b2ef8dbf540d0b87681d0a8cc9397cdf07f01 f44e42cf6391e72bb914a060b9555717634b189c (HEAD, origin/master, origin/HEAD, master)
Author: Marc De Leenheer [marc@onlabJonathan Hart [jono@onlab.us]
AuthorDate: Mon Tue Aug 3 154 09:3958:00 46 2015 -0700
Commit: Gerrit Code Review [gerrit@onlabJonathan Hart [jono@onlab.us]
CommitDate: Fri Mon Aug 7 1710 21:4916:01 19 2015 +0000
ONOS-2041: Flows don't stay in PENDING_ADD forever on LINC-OE-0400

Fix for flow equality bug which can cause:

<iframe src="https://onos-jenkins.onlab.us/job/HAsanity/plot/Plot-HA/getPlot?index=0&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 21.1 Assign mastership of switches to specific controllers - PASS
• 21.2 Check mastership was correctly assigned - FAIL
• Switches were not successfully reassigned

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
ONOS shows 2 SCCs
• PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
Links are incorrect
• PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

...

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 5: Setting up and gathering data for current state -

...

PASS

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch from each controller - PASS
• 5.3 Check for consistency in roles from each controller - PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 Check for consistency in Intents from each controller - PASS
• 5.6 Get the flows from each controller - PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Collecting topology information from ONOS - No Result
• 5.11 Host view is consistent across ONOS nodes - PASS
• 5.12 Each host has an IP address - PASS
• 5.13 Cluster view is consistent across ONOS nodes - PASS
• 5.14 Cluster view correct across ONOS nodes - FAIL
ONOS shows 2 SCCs
• PASS
• 5.15 Comparing ONOS topology to MN - PASS
• 5.16 Device information is correct - PASS
• 5.17 Links are correct - FAIL
Links are incorrect
• PASS
• 5.18 Hosts are correct - PASS

...

Case 6: Wait 60 seconds instead of inducing a failure - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 2 SCCs
• PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

...

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Compare switch roles from before failure - PASS
• 7.5 Get the intents and compare across all nodes - PASS
• 7.6 Check for consistency in Intents from each controller - PASS
• 7.7 Compare current intents with intents before the failure - PASS
• 7.8 Get the OF Table entries and compare to before component failure - PASS
• 7.9 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• .1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 2 SCCs
• PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

...

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 2 SCCs
• PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• again - PASS

Case 11: Killing a switch to ensure it is discovered correctly -

...

PASS

• 11.1 Kill s5 - FAIL
• Failed to kill switch?
• PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 3 SCCs
• PASS
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8.9 Links are correct - FAIL
Links are incorrect
• PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 2 SCCs
• PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 13: Test Cleanup - PASS

...