Page History

...

commit 632f16bfd8016f82c077555573762306d0577bd7 78b300c7c459a74ebcdc553e2bc315237bebe82c (HEAD, origin/master, origin/HEAD, master)
Author: Madan Jampani Jon Hall [madan@onlabjhall@onlab.us]
AuthorDate: Tue Aug 11 124 15:4252:59 55 2015 -0700
Commit: Brian O'Connor [bocon@onlabGerrit Code Review [gerrit@onlab.us]
CommitDate: Tue Wed Aug 11 12 23:3342:47 34 2015 +0000
Destroy ECMap instances on deactivate
--
(cherry picked from commit 0fa172fd1bf39495b1f763bbfead6257e815027a)

WIP: Transactional map cli for system tests

<iframe src="https://onos-jenkins.onlab.us/job/HAsanity/plot/Plot-HA/getPlot?index=0&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 21: Assigning Controller roles for switches -

...

PASS

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

• 21.1 Assign mastership of switches to specific controllers - PASS
• 21.2 Check mastership was correctly assigned - FAIL
• Switches were not successfully reassigned
• PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

...

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - FAIL
• Reactive Pingall failed, one or more ping pairs failed
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - PASS - FAIL
• Intent ECM anti-entropy took too long

Case 4: Verify connectivity by sendind traffic across Intents - PASS

...

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Compare switch roles from before failure - PASS
• 7.5 Get the intents and compare across all nodes - PASS
• 7.6 Check for consistency in Intents from each controller - PASS
• 7.7 Compare current intents with intents before the failure - PASS
• 7.8 Get the OF Table entries and compare to before component failure - PASS
• 7.9 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 15: Check that Leadership Election is still functional - PASS

...

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS - FAIL
• Intents have not been installed correctly, pings failed.

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

...

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 11: Killing a switch to ensure it is discovered correctly - PASS

...

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 12: Adding a switch to ensure it is discovered correctly - PASS

...

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Hosts are correct - PASS
• 8.11 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 13: Test Cleanup - PASS

...