Page History

...

commit 6f3f79f7f5edc4f6b0e79ccb1a6f3d8cf9c25e35 b0e1dd018a160134bc8fdd874a787f2bad3fc6dd (HEAD, origin/onos-1.23, onos-1.23)
Author: Jon Hall Jonathan Hart [jhall@onlabjono@onlab.us]
AuthorDate: Tue Aug 25 16:22:41 Wed Sep 23 17:54:11 2015 -0700
Commit: Brian O'Connor [bocon@onlabJonathan Hart [jono@onlab.us]
CommitDate: Thu Sep 3 1924 13:1122:53 23 2015 +0000
ONOS -2801
--
(cherry picked from commit df6a6e4af8eb704529b985e4a9f9b7edbb337703)0700

IntentManager: Don't compile all failed intents on every event

Case 1: Constructing test variables and building ONOS package - PASS

...

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology elements between Mininet and ONOS

• 8.1 Conmparing Mininet topology to ONOS topology - FAIL
• ONOS incorrectly discovered the topology
• PASS

Case 13: Discover all hosts - PASS

...

• 13.1 Discover all hosts using pingall - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 -

...

PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - FAIL
• Assertion Result for IPV4 host intent with mac addresses
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Failed
• Link Up Intent State Failed
• Remove Intents Passed
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Failed
• Link Up Intent State Failed
Remove Intents Passed
• PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - PASS
• 4000.2 IPV4_2: Add multi point to single point intents - PASS
• 4000.3 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Conmparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
• Assertion Result for dualstack2 host intent
• PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
Assertion Result for 1HOP for IPV4 same switch
• PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - FAIL
• Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
• Initial Pingall Passed

• Assertion Result vlan IPV4
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall FailedPassed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall FailedPassed
• Link Up Intent State FailedPassed
• Remove Intents Passed
• 4000.2 IPV4_2: Add multi point to single point intents - PASS
• 4000.3 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Conmparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.

...

3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - PASS
• 4000.2 IPV4_2: Add multi point to single point intents - PASS
• 4000.3 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Conmparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Failed
• Link Up Intent State Failed
• Remove Intents Passed
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Failed
• Link Up Intent State Failed
• Remove Intents Passed
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Initial Pingall Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Failed
• Link Up Intent State Failed
• Remove Intents Passed
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• Initial Pingall Failed
Remove Intents Passed
• PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - PASS
• 4000.2 IPV4_2: Add multi point to single point intents - PASS
• 4000.3 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS