Page History

...

commit a589d69611596ff1703dee1d5060865a9c582394 404b0fcf3688a8c699b14ad6efe40f5d723b9667 (HEAD, origin/master, origin/HEAD, master)
Author: Mahesh Poojary Huawei [mahesh.poojary@huaweilishuai [lishuai12@huawei.com]
AuthorDate: Sun Nov 29 15:42:19 2015 +0530Fri Dec 4 09:59:59 2015 +0800
Commit: Mahesh Poojary Huawei lishuai [maheshlishuai12@huawei.poojary@huawei.com]
CommitDate: Thu Fri Dec 3 044 11:3208:12 51 2015 +00000800

[ONOS-3117] store listener in Flow-Classifier Manager3479] Add the implementation of ArpService interface.

<iframe src="https://onos-jenkins.onlab.us/job/HAclusterRestart/plot/Plot-HA/getPlot?index=0&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 15.1 Run for election on each node - PASS
• 15.2 Check that each node shows the same leader and candidates - PASS
• 15.3 Find current leader and withdraw - PASS
• 15.4 Check that a new node was elected leader - PASS
• 15.5 Check that that new leader was the candidate of old leader - PASS
• 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS
• 15.7 Check that oldLeader is a candidate, and leader if only 1 node - PASS

Case 17: Check for basic functionality with distributed primitives -

...

PASS

• 17.1 Increment then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.2 Get then Increment a default counter on each node - FAIL
• Error incrementing default counter
• 17.3 Counters we added have the correct values - PASS FAIL
• Added counters are incorrect
• 17.4 Add -8 to then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.5 Add 5 to then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.6 Get then add 5 to a default counter on each node - FAIL
• Error incrementing default counter
• 17.7 Counters we added have the correct values - PASS
• 17.8 Increment and get an in-memory counter on each node - PASS
• 17.9 Get then Increment a in-memory counter on each node - PASS
• 17.10 Counters we added have the correct values - PASS
• 17.11 Add -8 to then get a in-memory counter on each node - FAIL
• Error incrementing in-memory counter
17.12 Add 5 to then get a in-memory
• counter
on each node - FAIL
• Error incrementing in-memory counter
• 17.13 Get then add 5 to a in-memory counter on each node - PASS
• 17.14 Counters we added have the correct values - PASS
• 17.15 Check counters are consistant across nodes - PASS
• 17.16 Counters we added have the correct values - PASS
• 17.17 Distributed Set get - PASS
• 17.18 Distributed Set size - PASS
• 17.19 Distributed Set add() - PASS
• 17.20 Distributed Set addAll() - PASS
• 17.21 Distributed Set contains() - PASS
• 17.22 Distributed Set containsAll() - PASS
• 17.23 Distributed Set remove() - PASS
• 17.24 Distributed Set removeAll() - PASS
• 17.25 Distributed Set addAll() - PASS
• 17.26 Distributed Set clear() - PASS
• 17.27 Distributed Set addAll() - PASS
• 17.28 Distributed Set retain() - PASS
• 17.29 Partitioned Transactional maps put - PASS
• 17.30 Partitioned Transactional maps get - PASS
• 17.31 In-memory Transactional maps put - PASS
• 17.32 In-Memory Transactional maps get - PASS

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 13: Test Cleanup - PASS

• 13.1 Killing tcpdumps - No Result
• 13.2 Stopping Mininet - PASS
13.3 Checking ONOS Logs for errors - No Result