Page History

...

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Checking ONOS nodes - PASS

Case 3: Adding host Intents -

...

FAIL

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - PASS
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - PASS FAIL

Case 4: Verify connectivity by sending traffic across Intents - PASS

...

• 61.1 Checking ONOS Logs for errors - No Result
• 61.2 Kill 2 ONOS nodes - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
ONOS shows 8 SCCs
• PASS
• 8.7 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8.8 Links are correct - FAIL
Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

...

• 62.1 Restarting 2 ONOS nodes - PASS
• 62.2 Checking if ONOS is up yet - PASS
• 62.3 Restarting ONOS main.CLIs - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - FAIL
• ONOS nodes have different views of clusters
• PASS
• 8.6 There is only one SCC - FAIL
ONOS shows 7 SCCs
• PASS
• 8.7 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8.8 Links are correct - FAIL
Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

Case 7: Running ONOS Constant State Tests -

...

PASS

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents and compare across all nodes - PASS
• 7.5 Check for consistency in Intents from each controller - FAIL
• ONOS nodes have different views of intents
• PASS
• 7.6 Compare current intents with intents before the failure - FAIL
• The Intents changed during failure
• PASS
• 7.7 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• PASS
• 7. 7.8 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - FAIL
• ONOS nodes have different views of clusters
• PASS
• 8.6 There is only one SCC - FAIL
ONOS shows 7 SCCs
• PASS
• 8.7 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8.8 Links are correct - FAIL
Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

...

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - FAIL
ONOS nodes have different views of clusters
• PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 6 SCCs
• PASS
• 8.7 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8.8 Links are correct - FAIL
• Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
ONOS topology don't match Mininet
• PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - FAIL
• ONOS shows 7 SCCs
• PASS
• 8.7 Device information is correct - FAIL
• Device information is incorrect
• PASS
• 8 8.8 Links are correct - FAIL
Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• PASS
• 8. 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - FAIL
• ONOS nodes have different views of clusters
• PASS
• 8.6 There is only one SCC - FAIL
ONOS shows 6 SCCs
• PASS
• 8.7 Device information is correct - FAIL
Device information is incorrect
• PASS
• 8.8 Links are correct - FAIL
Links are incorrect
• PASS
• 8.9 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 13: Test Cleanup - PASS

...