Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/USECASE_SdnipFunctionCluster/200/

...

  • 7.1 Stop sw32 - PASS (tick)
  • 7.2 Check routes installed - PASS (tick)
  • 7.3 Check M2S intents installed - PASS (tick)
  • 7.4 Check P2P intents installed - PASS (tick)
  • 7.5 Check ping between hosts behind BGP peers - PASS (tick)
  • 7.6 Check ping between BGP peers and speaker1 - PASS (tick)
  • 7.7 Check ping between BGP peers and speaker2 - PASS (tick)
  • 7.8 Check whether all flow status are ADDED - PASS (tick)

Case 8: Start the edge sw32, check P-2-P and M-2-S intents, ping test -

...

PASS

  • 8.1 Start sw32 - PASS (tick)
  • 8.2 Check routes installed - PASS (tick)
  • 8.3 Check M2S intents installed - PASS (tick)
  • 8.4 Check P2P intents installed - PASS (tick)
  • 8.5 Check whether all flow status are ADDED - FAIL (error)
  • Flow status is wrong!
  • PASS (tick)
  • 8.6 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 8.7 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 8.8 Check ping between each host pair - PASS (tick)

...

  • 11.1 Check routes installed - PASS (tick)
  • 11.2 Check M2S intents installed - PASS (tick)
  • 11.3 Check P2P intents installed - PASS (tick)
  • 11.4 Check whether all flow status are ADDED - PASS (tick)
  • 11.5 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 11.6 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 11.7 Check ping between each host pair - PASS (tick)
  • 11.8 Kill speaker1 - PASS (tick)
  • 11.9 Check routes installed - PASS (tick)
  • 11.10 Check M2S intents installed - PASS (tick)
  • 11.11 Check P2P intents installed - PASS (tick)
  • 11.12 Check whether all flow status are ADDED - PASS (tick)
  • 11.13 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 11.14 Check ping between each host pair - PASS (tick)

Case 12: Bring down leader ONOS node, check: route number, P2P intent number, M2S intent number, ping test - PASS

  • 12.1 Find out ONOS leader node - No Result (warning)
  • 12.2 Uninstall ONOS/SDN-IP leader node - PASS (tick)
  • 12.3 Check routes installed - PASS (tick)
  • 12.4 Check M2S intents installed - PASS (tick)
  • 12.5 Check P2P intents installed - PASS (tick)
  • 12.6 Check whether all flow status are ADDED - PASS (tick)
  • 12.7 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 12.8 BGP speakers ping peers, expect all tests to succeed - PASS (tick)
  • 12.9 Check ping between each host pair - PASS (tick)