Page History

...

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 -

...

FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - PASS
• 4000.2 IPV4_2: Add multi point to single point intents - PASS
• 4000.3 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Comparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

...

• FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• Initial Pingall Passed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Link Up Intent State Passed
• Remove Intents Passed
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
• Initial Pingall Passed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Link Up Intent State Passed
• Remove Intents Passed
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.

...

0 - PASS

This test case tests Host will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet

• 1000 4000.1 IPV4: Add host intents between h1 and h9 multi point to single point intents - PASS 1000
• 4000.2 IPV4_2 DUALSTACK1: Add host intents between h3 and h11 multi point to single point intents - PASS 1000
• 4000.3 DUALSTACK2VLAN: Add host intents between h1 and h11 multi point to single point intents - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000 5000.6 VLAN22 IPV4: Add inter vlan host intents between h13 h1 and h20 h9 - PASS

Case

...

14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 1 node(s)

...

ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS 2000
• 2.2 IPV4: Add point intents between h1 and h9 Creating ONOS package - PASS 2000
• 2.3 IPV4_2: Add point intents between h1 and h9 Uninstalling ONOS package - PASS 2000.4 SDNIP-ICMP: Add point intents between h1 and h9
• 2.4 Installing ONOS package - PASS
• 2000 2.5 SDNIP-TCP: Add point intents between h1 and h9 - Starting ONOS service - PASS 2000
• 2.6 DUALSTACK1: Add point intents between h3 and h11 Start ONOS cli - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case

...

12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

...

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Comparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case

...

1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000 1000.1 IPV4: Add multi point to single point intents host intents between h1 and h9 - PASS 4000
• 1000.2 IPV4_2DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
• 1000.3 VLANDUALSTACK2: Add multi point to single point intents host intents between h1 and h11 - PASS

Case 5000: Test host mobility with host intents - PASS

• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000 1000.2 IPV46 VLAN2: Add inter vlan host intents between h1 h13 and h9 h20 - PASS

Case

...

2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Comparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

...

cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

...

etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 -

...

PASS

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000.1 IPV4: Add multi point to single point intents - PASS
• 4000.2 IPV4_2: Add multi point to single point intents 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS 2000
• 4000.2 IPV43 VLAN: Add multi point to single point intents between h1 and h9 intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 2000 5000.3 2 IPV4_2: Add point host intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Initial Pingall Passed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Link Up Intent State Passed
• Remove Intents Passed
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 IPV4: Add single point to multi point intents - PASS
• 3000.2 IPV4_2: Add single point to multi point intents - PASS
• 3000.3 VLAN: Add single point to multi point intents - PASS

...

• PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 8.1 Comparing Mininet topology to ONOS topology - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000 1000.1 IPV4: Add multi point to single point intents host intents between h1 and h9 - PASS 4000
• 1000.2 IPV4_2DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
• 1000.3 VLANDUALSTACK2: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 host intents between h1 and h11 - PASS
• 5000 1000.2 IPV44 1HOP: Add host intents between h1 and h9 h3 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 14.1 Stopping Mininet Topology - PASS