Page History

...

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add and test host intents between h1 and h9 - FAIL
• Assertion result for IPV4 host intent with mac addresses
• PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
Assertion Result for dualstack IPV4 with MAC addresses
• PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
Assertion Result for dualstack2 host intent
• PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
• Assertion Result for 1HOP for IPV4 same switch
• PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
Assertion Result vlan IPV4
• PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - FAIL
Assertion Result different VLAN negative test
• PASS
• 1000.7 Confirm that ONOS leadership is unchanged - FAIL
ONOS Leader Mismatch
• PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
Assertion Result for IPV4 point intent
• PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
Assertion Result for IPV4 no mac address point intents
• PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
Assertion Result for Dualstack1 IPV4 with mac address point intents
• PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 with mac address point intents
• PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
Assertion Result for 1HOP IPV4 with no mac address point intents
• PASS

Case 5000: Test host mobility with host intents -

...

PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9
• PASS

Case 18: Stop Mininet and Scapy -

...

PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - FAIL
Failed to stop mininet
• PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

...

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives -

...

PASS

• 17.1 Enabling Flow Objectives - FAIL
Failed to activate Flow Objectives
• PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 with mac address point intents
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
• Assertion Result for 1HOP IPV4 with no mac address point intents

Case 5000: Test host mobility with host intents - FAIL

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9

Case 18: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

...