Page History

P4 is a programming language to define the behavior of the data plane, it can be used to program targets such as software switches, reconfigurable ASICs or FPGA-based NICsFPGAs, or it can be used to formally specify the behavior of a fixed-function switch. P4Runtime is a protocol to control at runtime a P4-defined pipeline, for example, to install entries in a match+action table defined in the P4 program. This page presents the support for P4 and P4Runtime in ONOS, moreover, we provide provides steps to set up an environment to try ONOS with the Behavioral Model v2 (BMv2) (the reference P4 software switch). Support for P4Runtime has been included in ONOS starting from the 1.11 (Loon) release.

This document assumes you are already familiar with ONOS, P4, P4Runtime and BMv2. If this is not the case, here's a list of pointers to get started:

• What's ONOS?
• ONOS Administrator Guide
• ONOS Developer Guide
• P4 white paper
• P4 language specification
• BMv2 slides at 2016 P4 workshop
• P4Runtime resources

Table of Contents

...

1. Build ONOS master

   Code Block
   language bash
   $ cd ~/onos $ git pull origin master $ bazel build onos

2. Run ONOS

   Code Block
   language bash
   $ export ONOS_APPS=drivers.bmv2,proxyarp,lldpprovider,hostprovider,fwd $ bazel run onos-local -- clean

   The variable ONOS_APPS indicates which ONOS applications to execute at ONOS boot. The list includes the BMv2 drivers (based on P4Runtime), the Proxy ARP application, the LLDP Link Provider, the Host Location Provider, and the Reactive Forwarding application. These applications combined together provide ONOS with capabilities to discover the topology (via injection of LLDP packets), the hosts (by intercepting and handling ARP requests) and to provide basic point-to-point connectivity.
   
   

3. On a second terminal shell, access the ONOS command line:

   Code Block
   language bash
   $ onos localhost

4. Check that all applications have been loaded successfully. On the ONOS command line, type:

   Code Block
   language bash
   onos> apps -s -a

   You should see an output similar to this (depending on your startup apps defined in $ONOS_APPS)

   * 10 org.onosproject.drivers 1.13.0.SNAPSHOT Default Drivers * 35 org.onosproject.generaldeviceprovider 1.13.0.SNAPSHOT General Device Provider * 36 org.onosproject.protocols.grpc 1.13.0.SNAPSHOT gRPC Protocol Subsystem * 37 org.onosproject.protocols.p4runtime 1.13.0.SNAPSHOT P4Runtime Protocol Subsystem * 38 org.onosproject.p4runtime 1.13.0.SNAPSHOT P4Runtime Provider * 39 org.onosproject.drivers.p4runtime 1.13.0.SNAPSHOT P4Runtime Drivers * 42 org.onosproject.proxyarp 1.13.0.SNAPSHOT Proxy ARP/NDP * 44 org.onosproject.hostprovider 1.13.0.SNAPSHOT Host Location Provider * 45 org.onosproject.lldpprovider 1.13.0.SNAPSHOT LLDP Link Provider * 73 org.onosproject.pipelines.basic 1.13.0.SNAPSHOT Basic Pipelines * 119 org.onosproject.drivers.bmv2 1.13.0.SNAPSHOT BMv2 Drivers * 146 org.onosproject.fwd 1.13.0.SNAPSHOT Reactive Forwarding

5. Start Mininet. On third VM terminal shell, type: 

   Code Block
   language bash
   $ sudo -E mn --custom $BMV2_MN_PY --switch onosbmv2 --controller remote

   This will run a simple Mininet topology with 2 hosts connected to a BMv2 switch, to use a different topology please refer to the Mininet guide. The -E argument in sudo ensures that all environment variables are exported to the root user. $BMV2_MN_PY is used to point to the location of the Mininet custom file bmv2.py provided in ONOS. If successful, the output of the previous command should be similar to this:

   *** Creating network *** Adding controller *** Adding hosts: h1 h2 *** Adding switches: s1 *** Adding links: (h1, s1) (h2, s1) *** Configuring hosts h1 h2 *** Starting controller c0 *** Starting 1 switches s1 Starting BMv2 target: simple_switch_grpc --device-id 0 -i 1@s1-eth1 -i 2@s1-eth2 --log-console -Lwarn --thrift-port 38148 --no-p4 -- --cpu-port 255 --grpc-server-addr 0.0.0.0:37346 [1] 2370 *** Starting CLI: mininet>

   Info
   title bmv2.py custom Mininet script
   When using the bmv2.py custom Mininet script, files related to the execution of the BMv2 switch are stored under /tmp. The name of these files depends on the switch name used in Mininet, e.g. s1, s2, etc. Example of these files are: bmv2-s1-grpc-port: contains the port used by the P4Runtime server executed by the BMv2 simple_switch_grpc instance named 's1' bmv2-s1-log: contains the BMv2 log bmv2-s1-netcfg.json: netcfg blob pushed to ONOS to discover the switch

   Info
   title bm-* commands
   The VM comes with a number command aliases to aid in the debugging of BMv2 when executed as part of Mininet. These commands all take one parameter, the switch name used in Mininet, e.g. s1, s2, etc. Command Description bm-log Shows a live scrolling view of the given BMv2 switch instance log bm-cli Access the BMv2 CLI, useful to dump table entries, etc. WARNING: this CLI uses the BMv2 Thrift-based APIs which capabilities overlap with P4Runtime (e.g. a table management is provided by both). For this reason, there could be inconsistency issues when using both APIs to write state to the switch. For example, if one tries to insert a table entry using Thrift, the same cannot be read using P4Runtime. In general, to avoid such issues, we suggest using this CLI only to read state, or to write state that is not managed by P4Runtime. bm-dbg Starts the BMv2 debugger bm-nmsg Start the BMv2 nanomsg event logger client

6. Check that the BMv2 switch has successfully connected to ONOS. On the ONOS command line, check the output of the following command.

   onos> devices id=device:bmv2:1, available=false, local-status=connected 9m33s ago, role=NONE, type=SWITCH, mfr=p4.org, hw=master, sw=master, serial=unknown, driver=bmv2:org.onosproject.pipelines.basic, locType=geo, name=device:bmv2:1, protocol=[p4runtime]

   From the output, we can see that the BMv2 switch is connected (available=true), along with information on the P4 program (pipeconf) deployed (driver=bmv2:org.onosproject.pipelines.basic) and on the protocol used to control the switch (protocol=[p4runtime]).
   
   

7. Check that the 2 hosts can ping each other. On the Mininet command line, use the pingall command check the output:

   Code Block
   language text
   mininet> pingall *** Ping: testing ping reachability h1 -> h2 h2 -> h1 *** Results: 0% dropped (2/2 received)

Update P4 tools to the latest version

Since P4Runtime is a work-in-progress effort, we frequently update ONOS to support the most recent capabilities. Similarly, we update the version of the P4 tools (BMv2, P4Runtime, and p4c) in the VM. Use the following commands to update ONOS and the P4 tools to the latest version:

...