Page History

...

• 1000.1 Add flows with MAC addresses as the only selectors - PASS
• 1000.2 Check flows are in the ADDED state - PASS
• 1000.3 Check flows are in Mininet's flow table - PASS
• 1000.4 Send a packet to verify the flows are correct - PASS

Case

...

3000: Delete flows that were added through rest - PASS

• 2000 3000.1 Deleting flows - PASS

Case 1100: Verify VLAN selector is correctly compiled - PASS

Install one flow with only the VLAN selector specified, then verify the flow is added in ONOS, and finally broadcast a packet with the correct VLAN tag.

• 1100.1 Add a flow with the VLAN tag as the only selector - PASS
• 1100.2 Check flows are in the ADDED state - PASS
• 1100.3 Check flows are in Mininet's flow table - PASS
• 1100.4 Send a packet to verify the flow are correct - PASS

Case 3000: Delete flows that were added through rest - PASS

• 3000.1 Deleting flows - PASS

Case 1200: Verify flow IP selectors are correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

• 1100 1200.1 Add flows with IPv4 ARP addresses as the only selectors - PASS
• 1100 1200.2 Check flow is in the ADDED state - PASS
• 1100 1200.3 Check flows are in Mininet's flow table - PASS
• 1100 1200.4 Send a packet to verify the flow is correct - PASS

Case

...

3000: Delete flows that were added through rest - PASS

• 2000 3000.1 Deleting flows - PASS

Case

...

1300: Verify

...

the MPLS selector is correctly compiled on the flow. - PASS

Install one flow with only the VLAN an MPLS selector specified, then verify the flow is added in ONOS, and finally broadcast send a packet via scapy that has a MPLS label.

• 1300.1 Add a flow with a MPLS selector - PASS
• 1300.2 Check flow is in the ADDED state - PASS
• 1300.3 Check flows are in Mininet's flow table - PASS
• 1300.4 Send a packet to verify the

...

• flow is correct - PASS

Case 3000: Delete flows that were added through rest - PASS

• 3000.1 Deleting flows - PASS

Case 1400: Verify flow IP selectors are correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

• 1400.1 Add flows with IPv4 addresses as the only selectors - PASS
• 1400.2 Check flow is in the ADDED state - PASS
• 1400.3 Check flows are in Mininet's flow table - PASS
• 1400.4 Send a packet to verify the flow is correct - PASS

Case 3000: Delete flows that were added through rest - PASS

• 3000.1 Deleting flows - PASS

Case 1500: Verify IPv6 selector is correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

• 1500.1 Add flows with IPv6 addresses as the only selectors - PASS
• 1500.2 Check flow is
• 1200.1 Add a flow with the VLAN tag as the only selector - PASS
• 1200.2 Check flows are in the ADDED state - PASS
• 1200 1500.3 Check flows are in Mininet's flow table - PASS
• 1200 1500.4 Send a packet to verify the flow are is correct - PASS

Case

...

3000: Delete flows that were added through rest - PASS

• 2000 3000.1 Deleting flows - PASS

Case

...

1600: Verify the

...

UDP selector is correctly compiled on the flow

...

- PASS

Install one a flow with an MPLS only the UDP selector specified, verify the flow is added in ONOS, and finally send a packet via scapy that has a MPLS label.UDP packet to verify the UDP selector is compiled correctly.

• 1600 1300.1 Add a flow with a MPLS UDP selector - PASS
• 1300 1600.2 Check flow is in the ADDED state - PASS
• 1300 1600.3 Check flows are in Mininet's flow table - PASS
• 1300 1600.4 Send a packet to verify the flow is correct - PASS

Case

...

3000: Delete flows that were added through rest - PASS

• 2000 3000.1 Deleting flows - PASS

Case

...

1700: Verify the TCP selector is correctly compiled on the flow - PASS

Install a flow with only the TCP selector specified, verify the flow is added in ONOS, and finally send a TCP packet to verify the TCP selector is compiled correctly.

• 1400 1700.1 Add a flow with a TCP selector - PASS
• 1400 1700.2 Check flow is in the ADDED state - PASS
• 1400 1700.3 Check flows are in Mininet's flow table - PASS
• 1400 1700.4 Send a packet to verify the flow is correct - PASS

Case

...

3000: Delete flows that were added through rest - PASS

• 2000 3000.1 Deleting flows - PASS

Case

...

1800: Verify the UDP selector is correctly compiled on the flow - PASS

Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.

• 1800.1 Add a flow with a SCTP selector - PASS
• 1800.2 Check flow is in the ADDED state - PASS
• 1800.

...

• 3 Check flows are in Mininet's flow table - PASS
• 1800.4 Send a packet to verify the flow is correct - PASS

Case 3000: Delete flows that were added through rest - PASS

• 3000.1 Deleting flows - PASS

Case 1900: Verify the ICMPv4 selector is correctly compiled on the flow - PASS

Install a flow with only the ICMPv4 selector specified, verify the flow is added in ONOS, and finally send a IMCPv4 packet to verify the ICMPv4 selector is compiled correctly.

• 1900.1 Add a flow with a ICMPv4 selector - PASS
• 1900.2 Check flow is in the ADDED state - PASS
• 1900.3 Check flows are in Mininet's flow table - PASS
• 1900.4 Send a packet to verify the flow is correct - PASS

Case 3000: Delete flows that were added through rest - PASS

• 3000.1 Deleting flows - PASS

Case 2000: Verify the ICMPv6 selector is correctly compiled on the flow - PASS

Install a flow with only the ICMPv6 selector specified, verify the flow is added in ONOS, and finally send a IMCPv6 packet to verify the ICMPv6 selector is compiled correctly.

• 2000 1500.1 Add a flow with a UDP ICMPv6 selector - PASS
• 1500 2000.2 Check flow is in the ADDED state - PASS
• 1500 2000.3 Check flows are in Mininet's flow table - PASS
• 1500 2000.4 Send a packet to verify the flow is correct - PASS

...