Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 8.1 Start sw32 - PASS
- 8.2 Check routes installed - PASS
- 8.3 Check M2S intents installed - PASS
- 8.4 Check P2P intents installed - PASS
- 8.5 Check whether all flow status are ADDED - PASS
- 8.6 BGP speakers ping peers, expect all tests to succeed - PASS
- 8.7 Check ping between each host pair - PASS
Case 9: Stop sw11 located in best path, check route number, P2P intent number, M2S intent number, ping test -
...
PASS
- 9.1 Check flow entry number in sw11 - PASS
- 9.2 Check flow entry number in sw1 - PASS
- 9.3 Check flow entry number in sw7 - PASS
- 9.4 Stop sw11 - PASS
- 9.5 Check routes installed - PASS
- 9.6 Check M2S intents installed - PASS
- 9.7 Check P2P intents installed - PASS
- 9.8 Check whether all flow status are ADDED - PASS
- 9.9 BGP speakers ping peers, expect all tests to succeed - PASS
- 9.10 Check ping between each host pair - FAIL
- Ping test results are Not expected
- PASS
Case 10: Start sw11 which was stopped in CASE9, check route number, P2P intent number, M2S intent number, ping test -
...
PASS
- 10.1 Check flow entry number in sw1 - FAIL
- Flow number in sw1 is wrong!
- PASS
- 10.2 Check flow entry number in sw7 - FAIL Flow number in sw7 is wrong!
- PASS
- 10.3 Start sw11 - PASS
- 10.4 Check routes installed - PASS
- 10.5 Check M2S intents installed - PASS
- 10.6 Check P2P intents installed - PASS
- 10.7 Check whether all flow status are ADDED - PASS
- 10.8 BGP speakers ping peers, expect all tests to succeed - PASS
- 10.9 Check ping between each host pair - PASS