Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Checking ONOS nodes - PASS
Case 3: Adding host Intents -
...
FAIL
Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - PASS
- 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS FAIL
Case 4: Verify connectivity by sending traffic across Intents - PASS
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - FAIL
- ONOS shows 2 8 SCCs
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
...
- 4.1 Ping across added host intents - FAIL Intents have not been installed correctly, pings failed.
- PASS
- 4.2 Check Intent state - FAIL
- Intents are not all in INSTALLED state
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - FAIL
- Intents have not been installed correctly, pings failed.
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - FAIL
- ONOS nodes have different views of clusters
- 8.6 There is only one SCC - FAIL
- ONOS shows 8 2 SCCs
- 8.7 Device information is correct - FAIL
- Device information is incorrect
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
...
- 4.1 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS FAIL
- Intents are not all in INSTALLED state
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 15: Case 15: Check that Leadership Election is still functional - FAIL
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - FAIL
- ONOS nodes have different views of clusters
- 8.6 There is only one SCC - FAIL
- ONOS shows 9 3 SCCs
- 8.7 Device information is correct - FAIL
- Device information is incorrect
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
...
- 4.1 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS FAIL
- Intents are not all in INSTALLED state
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - FAIL
- Intents have not been installed correctly, pings failed.
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - FAIL
- ONOS nodes have different views of clusters
- 8.6 There is only one SCC - FAIL
- ONOS shows 8 2 SCCs
- 8.7 Device information is correct - FAIL
- Device information is incorrect
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS FAIL
- Intents are not all in INSTALLED state
- 4. 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 11: Killing a switch to ensure it is discovered correctly - PASS
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - FAIL
- ONOS nodes have different views of clusters
- 8.6 There is only one SCC - FAIL
- ONOS shows 8 2 SCCs
- 8.7 Device information is correct - FAIL
- Device information is incorrect
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS FAIL
- Intents are not all in INSTALLED state
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 12: Adding a switch to ensure it is discovered correctly - PASS
...
- 8.1 Comparing ONOS topology to MN topology - FAIL
- ONOS topology don't match Mininet
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - FAIL
- ONOS nodes have different views of clusters
- 8.6 There is only one SCC - FAIL
- ONOS shows 8 2 SCCs
- 8.7 Device information is correct - FAIL
- Device information is incorrect
- 8.8 Links are correct - PASS FAIL
- Links are incorrect
- 8.9 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS FAIL
- Intents are not all in INSTALLED state
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 13: Test Cleanup - PASS
...