Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/SRClusterRestart/155/
SRClusterRestart at 21 24 Mar 2017 0705:0825:5628

Case 1: Cluster Restart test with 2x2 Leaf-spine - FAIL

  • 1.1 Constructing test variables - PASS (tick)
  • 1.2 Create and Apply cell file - PASS (tick)
  • 1.3 Create and Install ONOS package - PASS (tick)
  • 1.4 Starting ONOS service - PASS (tick)
  • 1.5 Checking if ONOS CLI is ready - PASS (tick)
  • 1.6 Starting Mininet Topology - PASS (tick)
  • 1.7 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 1.8 Check whether all flow status are ADDED - PASS (tick)
  • 1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1 - FAIL (error)
    • IP connectivity failed
  • 1.10 Connectivity for [u'olt10', u'vsg10'] CASE1 - FAIL (error)
    • IP connectivity failed
  • 1.11 Connectivity for [u'olt5', u'vsg5'] CASE1 - FAIL (error)
    • IP connectivity failed
  • 1.12 Killing ONOS instance - PASS (tick)
  • 1.13 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - FAIL (error)
    • IP connectivity failed
  • 1.14 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - FAIL (error)
    • IP connectivity failed
  • 1.15 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - FAIL (error)
    • IP connectivity failed
  • 1.16 Recovering ONOS instance - PASS (tick)
  • 1.17 Checking if ONOS CLI is ready - PASS (tick)
  • 1.18 Checking if ONOS CLI is ready - PASS (tick)
  • 1.19 Checking if ONOS CLI is ready - PASS (tick)
  • 1.20 Checking ONOS nodes - PASS (tick)
  • 1.21 Check whether the flow count is bigger than 116 - FAIL (error)
    • Flow count looks wrong: False
  • 1.22 Check whether all flow status are ADDED - PASS (tick)
  • 1.23 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - FAIL (error)
    • IP connectivity failed
  • 1.24 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - FAIL (error)
    • IP connectivity failed
  • 1.25 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - FAIL (error)
    • IP connectivity failed

Case 2: Cluster Restart test with 4x4 Leaf-spine - FAIL

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)
  • 2.5 Starting Mininet Topology - PASS (tick)
  • 2.6 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 2.7 Check whether all flow status are ADDED - PASS (tick)
  • 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2 - FAIL (error)
    • IP connectivity failed
  • 2.9 Connectivity for [u'olt10', u'vsg10'] CASE2 - FAIL (error)
    • IP connectivity failed
  • 2.10 Connectivity for [u'olt5', u'vsg5'] CASE2 - FAIL (error)
    • IP connectivity failed
  • 2.11 Killing ONOS instance - PASS (tick)
  • 2.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2_Failure - FAIL (error)
    • IP connectivity failed
  • 2.13 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure - FAIL (error)
    • IP connectivity failed
  • 2.14 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure - FAIL (error)
    • IP connectivity failed
  • 2.15 Recovering ONOS instance - PASS (tick)
  • 2.16 Checking if ONOS CLI is ready - PASS (tick)
  • 2.17 Checking if ONOS CLI is ready - PASS (tick)
  • 2.18 Checking if ONOS CLI is ready - PASS (tick)
  • 2.19 Checking ONOS nodes - PASS (tick)
  • 2.20 Check whether the flow count is bigger than 350 - FAIL (error)
    • Flow count looks wrong: False
  • 2.21 Check whether all flow status are ADDED - PASS (tick)
  • 2.22 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery - FAIL (error)
    • IP connectivity failed
  • 2.23 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery - FAIL (error)
    • IP connectivity failed
  • 2.24 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery - FAIL (error)
    • IP connectivity failed

Case 3: Cluster Restart test with single switch - FAIL

  • 3.1 Create and Apply cell file - PASS (tick)
  • 3.2 Create and Install ONOS package - PASS (tick)
  • 3.3 Starting ONOS service - PASS (tick)
  • 3.4 Checking if ONOS CLI is ready - PASS (tick)
  • 3.5 Starting Mininet Topology - PASS (tick)
  • 3.6 Check whether the flow count is bigger than 15 - FAIL (error)
    • Flow count looks wrong: False
  • 3.7 Check whether all flow status are ADDED - PASS (tick)
  • 3.8 Connectivity for [u'h1', u'h2'] CASE3 - FAIL (error)
    • IP connectivity failed
  • 3.9 Connectivity for [u'olt10', u'vsg10'] CASE3 - FAIL (error)
    • IP connectivity failed
  • 3.10 Connectivity for [u'olt5', u'vsg5'] CASE3 - FAIL (error)
    • IP connectivity failed
  • 3.11 Killing ONOS instance - PASS (tick)
  • 3.12 Connectivity for [u'h1', u'h2'] CASE3_Failure - FAIL (error)
    • IP connectivity failed
  • 3.13 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - FAIL (error)
    • IP connectivity failed
  • 3.14 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - FAIL (error)
    • IP connectivity failed
  • 3.15 Recovering ONOS instance - PASS (tick)
  • 3.16 Checking if ONOS CLI is ready - PASS (tick)
  • 3.17 Checking if ONOS CLI is ready - PASS (tick)
  • 3.18 Checking if ONOS CLI is ready - PASS (tick)
  • 3.19 Checking ONOS nodes - PASS (tick)
  • 3.20 Check whether the flow count is bigger than 15 - FAIL (error)
    • Flow count looks wrong: False
  • 3.21 Check whether all flow status are ADDED - PASS (tick)
  • 3.22 Connectivity for [u'h1', u'h2'] CASE3_Failure - FAIL (error)
    • IP connectivity failed
  • 3.23 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - FAIL (error)
    • IP connectivity failed
  • 3.24 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - FAIL (error)
    • IP connectivity failed