...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case
...
3000:
...
Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case
...
3000:
...
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
...
Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS 1000.2
- DUALSTACK1 2000.4 SDNIP-ICMP: Add host point intents between h3 h1 and h11 h9 - PASS 1000.3 DUALSTACK2
- 2000.5 SDNIP-TCP: Add host point intents between h1 and h11 h9 - PASS 1000
- 2000.4 1HOP6 DUALSTACK1: Add host point intents between h1 h3 and h3 h11 - PASS
- 1000 2000.5 VLAN17 VLAN: Add vlan host point intents between h4 h5 and h12 h21 - PASS 1000.6 Confirm that
- ONOS leadership is unchanged 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case
...
3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectivesstep such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
...
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 1000.1 IPV4: Add and test host point intents between h1 and h9 - PASS
- 1000 2000.3 IPV4_2 DUALSTACK1: Add host point intents between h3 h1 and h11 h9 - PASS 1000.3 DUALSTACK2
- 2000.4 SDNIP-ICMP: Add host point intents between h1 and h11 h9 - PASS 1000.4 1HOP
- 2000.5 SDNIP-TCP: Add host point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 1000 2000.5 VLAN17 VLAN: Add vlan host point intents between h4 h5 and h12 h21 - PASS 1000.6 Confirm that
- ONOS leadership is unchanged 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case
...
3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectivesintents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 2000 18.3 IPV4_2: Add point intents between h1 and h9 2 Stopping Mininet Topology - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
...
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case tests Host will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 1000 2000.1 IPV4NOOPTION: Add and test host point intents between h1 and h9 - PASS
- 1000 2000.2 DUALSTACK1IPV4: Add host point intents between h3 h1 and h11 h9 - PASS 1000
- 2000.3 DUALSTACK2IPV4_2: Add host point intents between h1 and h11 h9 - PASS
- 1000 2000.4 1HOPSDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add host point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 1000 2000.5 VLAN17 VLAN: Add vlan host point intents between h4 h5 and h12 h21 - PASS 1000.6 Confirm that
- ONOS leadership is unchanged 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case
...
3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rulesand compile intents using Flow Rules
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
...
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case
...
2: Starting up 3 node(s) ONOS cluster - PASS
Stopping the current mininet topology to start up fresh
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package 18.1 Stopping and Removing Scapy Host Components - PASS 18.2 Stopping Mininet
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package Topology - PASS
...
- 2.4 Installing ONOS package - PASS
...
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case
...
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
...
11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case tests Host will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesMininet and compile intents using Flow Rules
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS 1000.2
- DUALSTACK1 2000.5 SDNIP-TCP: Add host point intents between h3 h1 and h11 h9 - PASS 1000
- 2000.3 DUALSTACK26 DUALSTACK1: Add host point intents between h1 h3 and h11 - PASS 1000
- 2000.4 1HOP7 VLAN: Add host point intents between h1 h5 and h3 h21 - PASS
- 1000 2000.5 VLAN18 1HOP: Add vlan host point intents between h4 h1 and h12 h3 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
...
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
- 2000 3000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 Install and test single point to multi point intents - PASS 2000.5 SDNIP-TCP: Add point intents between h1 and h9
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 2000.6 DUALSTACK1 3000.3 IPV4_2: Add single point to multi point intents between h3 and h11 - PASS
- 2000 3000.7 4 VLAN: Add single point intents between h5 and h21 to multi point intents - PASS 2000
- 3000.8 1HOP5 VLAN: Add single point intents between h1 and h3 to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.7 VLAN8 1HOP: Add point intents between h5 h1 and h21 h3 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 Confirm that ONOS leadership is unchanged - PASS
...
Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
This test case will test point to point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesFlow Objectives
- 1000.1 IPV4: Add and test host
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000 1000.6 2 DUALSTACK1: Add point host intents between h3 and h11 - PASS 2000
- 1000.7 VLAN: Add point intents between h5 and h21 - PASS 2000.8 1HOP: Add point 3 DUALSTACK2: Add host intents between h1 and h3 h11 - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4 1000.4 1HOP: Add host intents between h1 and h9 h3 - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs 1000.6 Confirm that ONOS leadership is unchanged - PASS