Page History

...

commit c3984c65c32577ff7d7242f5d003bd70c3af635a f5e6be4da7168eecfb3aa524c467479c7dafb4fb (HEAD, origin/master, origin/HEAD, master)
Author: Thomas Vachuska [tom@onlab.us]
AuthorDate: Wed Sep 7 1720:5158:45 22 2016 -0700
Commit: Thomas Vachuska [tom@onlab.us]
CommitDate: Wed Sep 7 1720:5158:45 22 2016 -0700

Fixed javadoc error.

...

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules -

...

FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

• FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.8 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

...

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State FailedPassed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State PassedFailed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check PassedFailed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received PassedRecieved Failed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000 3000.1 IPV4: Add host intents between h1 and h9 NOOPTION: Install and test single point to multi point intents - PASS 1000
• 3000.2 DUALSTACK1: Add host intents between h3 and h11 IPV4: Install and test single point to multi point intents - PASS 1000
• 3000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 single point to multi point intents - PASS 1000
• 3000.4 1HOPVLAN: Add host intents between h1 and h3 single point to multi point intents - PASS 1000
• 3000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 single point to multi point intents - PASS 1000
• 3000.6 VLAN2: Add vlan host intents between h4 and h13 ENCAPSULATION: Install and test single point to multi point intents - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000 4000.1 NOOPTION: Add multi point intents between h1 and h9 to single point intents - PASS 2000
• 4000.2 IPV4: Add multi point intents between h1 and h9 to single point intents - PASS
• 2000 4000.3 IPV4_2: Add multi point intents between h1 and h9 to single point intents - PASS 2000
• 4000.4 SDNIP-ICMPVLAN: Add multi point to single point intents between h1 and h9 - PASS 2000
• 4000.5 SDNIP-TCPVLAN: Add multi point intents between h1 and h9 to single point intents - PASS
• 2000 4000.6 DUALSTACK1ENCAPSULATION: Add multi point to single point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000 5000.9 1HOP2 IPV4: Add point host intents between h1 and h3 h9 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS
• 3000.6 ENCAPSULATION: Install and test single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - FAIL

Case 6000: Test Multi to Single End Point Failure - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check
• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with no options setpartial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down PassedIsolation
• Partial failure isolation link Down Intent State PassedFailed
• Isolation Partial failure isolation link Down Flow State Passed
• Isolation Partial failure isolation link Down Topology State Passed
• Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
• Partial failure isolation link Down Connectivity Check PassedFailed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received PassedRecieved Failed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State FailedPassed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000. 1000.8 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - FAIL
Assertion Result for VLAN Encapsulation Point Intent
• PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

...

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options setwith partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down PassedIsolation
• Partial failure isolation link Down Intent State Passed
• Isolation Partial failure isolation link Down Flow State Passed
• Isolation Partial failure isolation link Down Topology State Passed
• Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point 2 Installing Multi to Single Point intents with partial failure failures allowed - FAIL
• Assertion results for IPV4 single to multi to single point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State FailedPassed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check PassedFailed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

...

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS
• 3000.6 ENCAPSULATION: Install and test single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000 4000.1 IPV4NOOPTION: Add host intents between h1 and h9 multi point to single point intents - PASS 1000
• 4000.2 DUALSTACK1IPV4: Add host intents between h3 and h11 multi point to single point intents - PASS 1000
• 4000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 multi point to single point intents - PASS 1000
• 4000.4 1HOPVLAN: Add host intents between h1 and h3 multi point to single point intents - PASS 1000
• 4000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 multi point to single point intents - PASS 1000
• 4000.6 VLAN2ENCAPSULATION: Add vlan host intents between h4 and h13 multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 1000 5000.7 Encapsulation2 IPV4: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS
• 3000.6 ENCAPSULATION: Install and test single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - FAIL

Case 6000: Test Multi to Single End Point Failure - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State FailedPassed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

...

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State FailedPassed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.8 Confirm that ONOS 1000.8 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

• State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

...

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State FailedPassed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved FailedReceived Passed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

...

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
• Isolation link Down Flow State Passed
• Partial failure isolation Isolation link Down Topology State Passed
• Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures 2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State FailedPassed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check FailedPassed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State FailedPassed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved FailedReceived Passed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Failed
• 1000.8 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point Intent

...

• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case will test single point to multi point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000 1000.1 NOOPTION: Install and test single point to multi point intents IPV4: Add host intents between h1 and h9 - PASS 3000
• 1000.2 IPV4: Install and test single point to multi point intents DUALSTACK1: Add host intents between h3 and h11 - PASS 3000
• 1000.3 IPV4_2DUALSTACK2: Add single point to multi point intents host intents between h1 and h11 - PASS 3000
• 1000.4 VLAN1HOP: Add single point to multi point intents host intents between h1 and h3 - PASS 3000
• 1000.5 VLANVLAN1: Add single point to multi point intents vlan host intents between h4 and h12 - PASS 3000
• 1000.6 ENCAPSULATION: Install and test single point to multi point intents VLAN2: Add vlan host intents between h4 and h13 - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

• 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
• Assertion Result for VLAN Encapsulated host intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Pingall Passed
• Remove Intents Passed
• 1000.8 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000 2000.1 NOOPTION: Add multi point to single point intents between h1 and h9 - PASS 4000
• 2000.2 IPV4: Add multi point to single point intents intents between h1 and h9 - PASS
• 4000 2000.3 IPV4_2: Add multi point to single point intents intents between h1 and h9 - PASS 4000
• 2000.4 VLANSDNIP-ICMP: Add multi point to single point intents between h1 and h9 - PASS 4000
• 2000.5 VLANSDNIP-TCP: Add multi point to single point intents between h1 and h9 - PASS 4000
• 2000.6 ENCAPSULATIONDUALSTACK1: Add multi point to single point intents between h3 and h11 - PASS

Case 5000: Test host mobility with host intents - PASS

• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000 2000.2 IPV49 1HOP: Add host point intents between h1 and h9 h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS

Case

...

3000:

...

Single to Multi

...

Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS
• 3000.6 ENCAPSULATION: Install and test single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Passed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State FailedPassed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Failed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Passed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Failed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State FailedPassed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved FailedReceived Passed
• Remove Intents Passed

Case 18: Stop Mininet and Scapy - PASS

...