Page History

...

1000.1 IPV6: Add host intents between h1 and h9 - FAIL

IPV6: Host intent test failed between two IPV6 hosts

1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL

DUALSTACK: Host intent test failed between twodual stack host using IPV6

1000.3 1HOP: Add host intents between h1 and h3 - FAIL

1HOP: Host intent test failed between twohost using IPV6 in the same switch

1000.4 VLAN: Add vlan host intents between h5 and h24 - FAIL

VLAN1: Host intent test failed between twohost using IPV6 in the same VLAN

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - FAIL

Assertion Result for NOOPTION point intent
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

2000.2 IPV6: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV6 point intent
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Failed
Link Up Intent State Passed
Remove Intents Failed

2000.3 IPV6_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV6 no mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Remove Intents Failed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV6 using ICMP point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV6 using TCP point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Iperf6 Passed
Remove Intents Failed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV6 with mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Failed
Link Up Intent State Passed
Remove Intents Failed

2000.7 VLAN: Add point intents between h5 and h24 - FAIL

Assertion Result for VLAN IPV6 with mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Passed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Passed
Link Up Intent State Passed
Remove Intents Failed

2000.8 1HOP: Add point intents between h1 and h9 - FAIL

Assertion Result for 1HOP IPV6 with no mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Remove Intents Failed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

3000.1 NOOPTION: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with no options set
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Failed
Link Up Intent State Passed
Remove Intents Failed

3000.2 IPV6: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

3000.3 IPV6_2: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and no MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and MAC addresses in the same VLAN
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

...

using

...

4000.1 NOOPTION: Add multi point to single point intents - FAIL

Assertion results for NOOPTION multi to single point intent
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Failed
Link Up Intent State Passed
Remove Intents Failed

4000.2 IPV6: Add multi point to single point intents - PASS
4000.3 IPV6_2: Add multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent with IPV6 type and no MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Remove Intents Failed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent with IPV6 type and no MAC addresses in the same VLAN
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

Case 5000: Test host mobility with host intents - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV6: Add host intents between h1 and h9 - FAIL

Assert result for IPV6 host intent between h1, moved, and h9
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Remove Intents Failed

Case 6000: Test Single to Multiple End Point Failure - FAIL

6000.1 NOOPTION: test end point failure for multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent end point failure with no options set
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Passed
Remove Intents Failed

6000.2 IPV6: test end point failure for multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Passed
Remove Intents Failed

6000.3 IPV6_2: test end point faliure for multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Failed
Remove Intents Failed

6000.4 VLAN: test end point failure for multi point to single point intents - FAIL

Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses in the same VLAN
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Failed
Remove Intents Failed

6000.5 NOOPTION: test end point failure for single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent end point failure with no options set
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Failed
Remove Intents Failed

6000.6 IPV6: test end point failure for single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent end point failure with IPV6 type and MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Passed
Remove Intents Failed

6000.7 IPV6_2: test end point failure for single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and no MAC addresses
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Failed
Remove Intents Failed

6000.8 VLAN: test end point failure for single point to multi point intents - FAIL

14.1 Stopping Mininet Topology - PASS

Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and MAC addresses in the same VLAN
Initial Flow Count Passed
Initial Flow State Passed
Initial Pingall Failed
First Link Down Passed
Second Link Down Passed
Link Down Flow Count Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Isolation Third Link Down Passed
Isolation Link Down Flow Count Passed
Isolation Link Down Flow State Passed
Isolation Link Down Topology State Passed
Isolation Link Down Ping6all Failed
Isolation Link Down Intent State Failed
First Link Up Passed
Second Link Up Passed
Third Link Up Passed
Link Up Flow Count Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Failed
Link Up Intent State Failed
Remove Intents Failed

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

Page tree

Versions Compared

Old Version 289

New Version 290

Key