Page History

Case 1: Bridging and Routing sanity test with 2x2 Leaf-spine - PASS

• 1.1 Constructing test variables - PASS
• 1.2 Create and Apply cell file - PASS
• 1.3 Create and Install ONOS package - PASS
• 1.4 Starting ONOS service - PASS
• 1.5 Checking if ONOS CLI is ready - PASS
• 1.6 Starting Mininet Topology - PASS
• 1.7 Check whether the flow count is bigger than 116 - PASS
• 1.8 Check whether all flow status are ADDED - PASS
• 1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
• 1.10 Connectivity for [u'olt10', u'vsg10'] - PASS
• 1.11 Connectivity for [u'olt5', u'vsg5'] - PASS
• 1.12 Pushing new configuration - No Result
• 1.13 Pushing new configuration - No Result
• 1.14 Check whether the flow count is bigger than 140 - PASS
• 1.15 Check whether all flow status are ADDED - PASS
• 1.16 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE1 - PASS
• 1.17 Connectivity for [u'olt10', u'vsg10'] CASE1 - PASS
• 1.18 Connectivity for [u'olt5', u'vsg5'] CASE1 - PASS
• 1.19 Connectivity for ['olt1', 'vsg1'] CASE1 - PASS

Case 2: Bridging and Routing sanity test with 4x4 Leaf-spine - PASS

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS
• 2.5 Starting Mininet Topology - PASS
• 2.6 Check whether the flow count is bigger than 350 - PASS
• 2.7 Check whether all flow status are ADDED - PASS
• 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
• 2.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 2.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 2.11 Pushing new configuration - No Result
• 2.12 Pushing new configuration - No Result
• 2.13 Check whether the flow count is bigger than 380 - PASS
• 2.14 Check whether all flow status are ADDED - PASS
• 2.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE2 - PASS
• 2.16 Connectivity for [u'olt10', u'vsg10'] CASE2 - PASS
• 2.17 Connectivity for [u'olt5', u'vsg5'] CASE2 - PASS
• 2.18 Connectivity for ['olt1', 'vsg1'] CASE2 - PASS

Case 3: Bridging and Routing sanity test with single switch - PASS

• 3.1 Create and Apply cell file - PASS
• 3.2 Create and Install ONOS package - PASS
• 3.3 Starting ONOS service - PASS
• 3.4 Checking if ONOS CLI is ready - PASS
• 3.5 Starting Mininet Topology - PASS
• 3.6 Check whether the flow count is bigger than 15 - PASS
• 3.7 Check whether all flow status are ADDED - PASS
• 3.8 Connectivity for [u'h1', u'h2'] - PASS
• 3.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 3.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 3.11 Pushing new configuration - No Result
• 3.12 Pushing new configuration - No Result
• 3.13 Check whether the flow count is bigger than 18 - PASS
• 3.14 Check whether all flow status are ADDED - PASS
• 3.15 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE3 - PASS
• 3.16 Connectivity for [u'olt10', u'vsg10'] CASE3 - PASS
• 3.17 Connectivity for [u'olt5', u'vsg5'] CASE3 - PASS
• 3.18 Connectivity for ['olt1', 'vsg1'] CASE3 - PASS

Case 4: Bridging and Routing sanity test with 2x2 Leaf-spine - PASS

• 4.1 Create and Apply cell file - PASS
• 4.2 Create and Install ONOS package - PASS
• 4.3 Starting ONOS service - PASS
• 4.4 Checking if ONOS CLI is ready - PASS
• 4.5 Starting Mininet Topology - PASS
• 4.6 Check whether the flow count is bigger than 116 - PASS
• 4.7 Check whether all flow status are ADDED - PASS
• 4.8 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
• 4.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 4.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 4.11 Pushing new configuration - No Result
• 4.12 Pushing new configuration - No Result
• 4.13 Check whether the flow count is bigger than 140 - PASS
• 4.14 Check whether all flow status are ADDED - PASS
• 4.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE4 - PASS
• 4.16 Connectivity for [u'olt10', u'vsg10'] CASE4 - PASS
• 4.17 Connectivity for [u'olt5', u'vsg5'] CASE4 - PASS
• 4.18 Connectivity for ['olt1', 'vsg1'] CASE4 - PASS
• 4.19 Killing ONOS instance - PASS
• 4.20 Removing host configuration - No Result
• 4.21 Removing configuration - No Result
• 4.22 Removing vlan configuration - No Result
• 4.23 Check whether the flow count is bigger than 116 - PASS
• 4.24 Check whether all flow status are ADDED - PASS
• 4.25 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE4_after - PASS
• 4.26 Connectivity for [u'olt10', u'vsg10'] CASE4_after - PASS
• 4.27 Connectivity for [u'olt5', u'vsg5'] CASE4_after - PASS
• 4.28 Connectivity for ['olt1', 'vsg1'] CASE4_after - PASS

Case 5: Bridging and Routing sanity test with 4x4 Leaf-spine - PASS

• 5.1 Create and Apply cell file - PASS
• 5.2 Create and Install ONOS package - PASS
• 5.3 Starting ONOS service - PASS
• 5.4 Checking if ONOS CLI is ready - PASS
• 5.5 Starting Mininet Topology - PASS
• 5.6 Check whether the flow count is bigger than 350 - PASS
• 5.7 Check whether all flow status are ADDED - PASS
• 5.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
• 5.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 5.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 5.11 Pushing new configuration - No Result
• 5.12 Pushing new configuration - No Result
• 5.13 Check whether the flow count is bigger than 380 - PASS
• 5.14 Check whether all flow status are ADDED - PASS
• 5.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5 - PASS
• 5.16 Connectivity for [u'olt10', u'vsg10'] CASE5 - PASS
• 5.17 Connectivity for [u'olt5', u'vsg5'] CASE5 - PASS
• 5.18 Connectivity for ['olt1', 'vsg1'] CASE5 - PASS
• 5.19 Killing ONOS instance - PASS
• 5.20 Removing host configuration - No Result
• 5.21 Removing configuration - No Result
• 5.22 Removing vlan configuration - No Result
• 5.23 Check whether the flow count is bigger than 350 - PASS
• 5.24 Check whether all flow status are ADDED - PASS
• 5.25 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5_After - PASS
• 5.26 Connectivity for [u'olt10', u'vsg10'] CASE5_After - PASS
• 5.27 Connectivity for [u'olt5', u'vsg5'] CASE5_After - PASS
• 5.28 Connectivity for ['olt1', 'vsg1'] CASE5_After - PASS

Case 6: Bridging and Routing sanity test with single switch - PASS

• 6.1 Create and Apply cell file - PASS
• 6.2 Create and Install ONOS package - PASS
• 6.3 Starting ONOS service - PASS
• 6.4 Checking if ONOS CLI is ready - PASS
• 6.5 Starting Mininet Topology - PASS
• 6.6 Check whether the flow count is bigger than 15 - PASS
• 6.7 Check whether all flow status are ADDED - PASS
• 6.8 Connectivity for [u'h1', u'h2'] - PASS
• 6.9 Connectivity for [u'olt10', u'vsg10'] - PASS
• 6.10 Connectivity for [u'olt5', u'vsg5'] - PASS
• 6.11 Pushing new configuration - No Result
• 6.12 Pushing new configuration - No Result
• 6.13 Check whether the flow count is bigger than 20 - PASS
• 6.14 Check whether all flow status are ADDED - PASS
• 6.15 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6 - PASS
• 6.16 Connectivity for [u'olt10', u'vsg10'] CASE6 - PASS
• 6.17 Connectivity for [u'olt5', u'vsg5'] CASE6 - PASS
• 6.18 Connectivity for ['olt1', 'vsg1'] CASE6 - PASS
• 6.19 Killing ONOS instance - PASS
• 6.20 Removing host configuration - No Result
• 6.21 Removing configuration - No Result
• 6.22 Removing vlan configuration - No Result
• 6.23 Check whether the flow count is bigger than 15 - PASS
• 6.24 Check whether all flow status are ADDED - PASS
• 6.25 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6_After - PASS
• 6.26 Connectivity for [u'olt10', u'vsg10'] CASE6_After - PASS
• 6.27 Connectivity for [u'olt5', u'vsg5'] CASE6_After - PASS
• 6.28 Connectivity for ['olt1', 'vsg1'] CASE6_After - PASS