Page History

...

commit a195755c03dcb219e566121445fc6a5c5fab1d28 8c7b12814d77730ee8cf34514c62d00f8ea191b9 (HEAD, origin/master, origin/HEAD, master)
Author: yoonseon [yoonseon@onlabBrian O'Connor [bocon@onlab.us]
AuthorDate: Wed Sun Nov 2 6 06:15:53:07 12 2016 -04000800
Commit: Yuta HIGUCHI [y-higuchi@onlabThomas Vachuska [tom@onlab.us]
CommitDate: Thu Sun Nov 3 6 15:3932:49 29 2016 +0000
[ONOS-5587] CopyConfig() of NetConf driver should use [config] tag0100

Adding sonar properties generation script

Case 1: Constructing test variables and building ONOS package - PASS

...

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy -

...

PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - FAIL
• ONOS incorrectly discovered hosts
• Skipping the rest of this case.
• PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches -

...

PASS

• 16.1 Balancing mastership of switches - PASS
Skipping the rest of this case.

Case 1000:

...

• Skipping the rest of this case.

Case 2000: - FAIL

• Skipping the rest of this case.

Case 3000: - FAIL

• Skipping the rest of this case.

Case 5000: - FAIL

• Skipping the rest of this case.

Case 18: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - FAIL
• Failed to stop mininet

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

...

Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000 1000.1 NOOPTIONIPV4: Install Add and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 3000.2 IPV4: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Failed
• Bad Sender Ping Passed
• Bad Recipient Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - FAIL

• 15.1 Send packets from each host to the first host and confirm onos discovery - FAIL
• ONOS incorrectly discovered hosts
• Skipping the rest of this case.

Case 16: - FAIL

• Skipping the rest of this case.

Case 17: - FAIL

• Skipping the rest of this case.

Case 1000: - FAIL

• Skipping the rest of this case.

Case 2000: - FAIL

• Skipping the rest of this case.

Case 3000: - FAIL

• Skipping the rest of this case.

Case 5000: - FAIL

• Skipping the rest of this case.

Case 18: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - FAIL
• Failed to stop mininet

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

...

• host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host will test point to point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rulesintents using Flow Rules

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000 2000.3 IPV4_2 DUALSTACK1: Add host point intents between h3 h1 and h11 h9 - PASS 1000.3 DUALSTACK2
• 2000.4 SDNIP-ICMP: Add host point intents between h1 and h11 h9 - PASS 1000.4 1HOP
• 2000.5 SDNIP-TCP: Add host point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 1000 2000.5 VLAN18 1HOP: Add vlan host point intents between h4 h1 and h12 h3 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

...

Case 3000: Single to Multi Point Intents Test -

...

3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

• 2000 3000.1 NOOPTION: Add point intents between h1 and h9 : Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS 2000
• 3000.2 IPV44 VLAN: Add single point intents between h1 and h9 to multi point intents - PASS 2000.3 IPV4_2
• 3000.5 VLAN: Add single point to multi point intents between h1 and h9 - PASS 2000.4 SDNIP-ICMP: Add point intents between h1 and h9

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 2000.5 SDNIP-TCP 5000.2 IPV4: Add point host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS 2000.8 1HOP: Add point intents between h1 and h3
• 18.2 Stopping Mininet Topology - PASS

Case

...

19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesONOS cluster

• 2.1 Uninstalling ONOS package 3000.1 NOOPTION: Install and test single point to multi point intents - PASS 3000
• 2.2 IPV4: Install and test single point to multi point intents Apply cell to environment - PASS 3000
• 2.3 IPV4_2: Add single point to multi point intents Creating ONOS package - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS 5000.2 IPV4: Add host
• intents between h1 and h9 2.6 Start ONOS cli - PASS

Case

...

11:

...

Start Mininet topology with OF 1.3 switches - PASS

Stopping the current Start mininet topology to start up freshwith OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches
• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case

...

12: Assign switches to controllers - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers 19.1 Copying karaf logs - PASS

Case

...

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - FAIL

• 15.1 Send packets from each host to the first host and confirm onos discovery - FAIL
• ONOS incorrectly discovered hosts
• Skipping the rest of this case.

Case 16: - FAIL

• Skipping the rest of this case.

Case 1000: - FAIL

• Skipping the rest of this case.

Case 2000: - FAIL

• Skipping the rest of this case.

Case 3000: - FAIL

• Skipping the rest of this case.

Case 5000: - FAIL

• Skipping the rest of this case.

Case 18: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - FAIL
• Failed to stop mininet

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

...

13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point tests Host intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectivescompile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9
• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS 3000
• 1000.4 VLAN2 DUALSTACK1: Add single point to multi point intents host intents between h3 and h11 - PASS 3000
• 1000.5 VLAN3 DUALSTACK2: Add single point to multi point intents - PASS

...

• host

...

• 5000.1 Testing host mobility by moving h1 from s5 to s6 intents between h1 and h11 - PASS
• 5000 1000.2 IPV44 1HOP: Add host intents between h1 and h9 h3 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs 1000.6 Confirm that ONOS leadership is unchanged - PASS

Case

...

2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - FAIL

• 15.1 Send packets from each host to the first host and confirm onos discovery - FAIL
• ONOS incorrectly discovered hosts
• Skipping the rest of this case.

Case 16: - FAIL

• Skipping the rest of this case.

Case 17: - FAIL

• Skipping the rest of this case.

Case 1000: - FAIL

• Skipping the rest of this case.

Case 2000: - FAIL

• Skipping the rest of this case.

Case 3000: - FAIL

• Skipping the rest of this case.

Case 5000: - FAIL

Skipping the rest of this case.

Case 18: Stop Mininet and Scapy -

...

PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - FAIL
Failed to stop mininet
• PASS

Case 19: Copy karaf logs - PASS

...