Page History

...

HTML
<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCintent_master_20-builds_graph.jpg", alt="FUNCintent", style="width:525px;height:350px;border:0">

commit fb3a1bbd13f3dc6172be5a741a6008f6de61bf9f ed77aeb7bc8525da868f6e5b13715df2aaf4c720 (HEAD -] master, origin/master, origin/HEAD)
Author: Esin Karaman Sean Condon [esinsean@opennetworking.karaman@netsia.comorg]
AuthorDate: Fri Sun Mar 13 1415 21:3824:14 43 2020 +0000
Commit: Esin Karaman Sean Condon [esinsean@opennetworking.karaman@netsia.comorg]
CommitDate: Fri Mon Mar 13 16 10:4353:14 38 2020 -0400
VOL-2734 Adding inner vlan id field to McastConfig to configure inner vlan id+0000

Upgraded some components for GUI2

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intentSDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV45 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.6 DUALSTACK1 2000.3 IPV4_2: Add point intents between h1 h3 and h9 h11 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN 2000.4 SDNIP-ICMP: Add point intents between h1 h5 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

h21 - PASS
2000.9 1HOP 2000.5 SDNIP-TCP: Add point intents between h1 and h9 h3 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

PASS
2000.10 Add point to point intents using VLAN Encapsulation 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add 11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h5 h1 and h21 h9 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000 4000.1 NOOPTION: Install and test single Add multi point to multi single point intents - PASS 3000
4000.2 IPV4: Install and test single Add multi point to multi single point intents - PASS
3000 4000.3 IPV4_2: Add single multi point to multi single point intents - PASS
3000 4000.4 VLAN: Add single multi point to multi single point intents - PASS 3000
4000.5 VLAN: Add multi point to single point to multi intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case

...

5000:

...

Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Failed
Isolation link Down Passed
Partial failure isolation link Down Intent State Failed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Failed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
Isolation link Down Flow State Passed
Partial failure isolation Isolation link Down Topology State Passed
Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
After removing intents Flow State Passed

6000.4 4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
After removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

...

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping PassedFailed
Link Down Passed
Link Down Intent State FailedPassed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall PassedFailed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV45 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed
using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP 2000.3 IPV4_2: Add point intents between h1 and h9 h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for IPV4 no mac address point intentsInstall VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State FailedPassed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add 11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intentsfor BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Bandwidth Allocation check Failed
After Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result results for Dualstack1 IPV4 with mac address point intentssingle to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State FailedPassed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000 3000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation 2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
Install Result for VLAN Encapsulation Point IntentInstall Intent State PassedEncapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Intial Initial Flow State FailedPassed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intentresults for IPV4 single to multi point intent with IPV4 type and no MAC addresses
Install Intent State PassedBandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State FailedPassed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

After removing intents Flow State Passed

3000.4 VLAN: Add 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

...

FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.5 VLAN: Add single point to multi point intents - FAIL

Assertion results for single to multi point intent with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - FAIL

Assertion results for NOOPTION multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.2 IPV4: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.3 IPV4_2: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall FailedPassed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000 4000.5 SDNIP-TCPVLAN: Add multi point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

...

to single point intents - FAIL

Assertion results for multi to single point intent with VLAN ID treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL

Assertion results for VLAN Encapsulation multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS

...

5000.2 IPV4: Add host intents between h1 and h9 - FAIL

Assert result for IPV4 host intent between h1, moved, and h9
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 6000: Test Multi to Single End Point Failure - 3

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

...

NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives -

...

FAIL

5000 6000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Connectivity Check Passed
Link Down Passed
Link Down Intent State Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State FailedPassed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State FailedPassed

Case

...

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

...

18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

...

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules
1000.1 IPV4: Add host intents between h1 and h9 6000.1 Installing Multi to Single Point intents with no options set - PASS 6000
1000.2 Installing Multi to Single Point intents with partial failure allowed DUALSTACK1: Add host intents between h3 and h11 - PASS
6000 1000.3 NOOPTION: Install and test single point to multi point intents DUALSTACK2: Add host intents between h1 and h11 - PASS 6000
1000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed 1HOP: Add host intents between h1 and h3 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 18.1 Stopping and Removing Scapy Host Components - PASS 18.2 Stopping Mininet
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case

...

2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using Set up ONOS with 1 node(s) ONOS clustercluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 2.1 Apply cell to environment - PASS
2 2000.2 Uninstalling Atomix IPV4: Add point intents between h1 and h9 - PASS 2
2000.3 Uninstalling ONOS package IPV4_2: Add point intents between h1 and h9 - PASS 2
2000.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

1000 3000.1 IPV4: Add host intents between h1 and h9 NOOPTION: Install and test single point to multi point intents - PASS 1000
3000.2 DUALSTACK1: Add host intents between h3 and h11 IPV4: Install and test single point to multi point intents - PASS 1000
3000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 single point to multi point intents - PASS 1000
3000.4 1HOPVLAN: Add host intents between h1 and h3 single point to multi point intents - PASS 1000
3000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 single point to multi point intents - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

2000 4000.1 NOOPTION: Add multi point to single point intents between h1 and h9 - PASS 2000
4000.2 IPV4: Add multi point to single point intents between h1 and h9 - PASS 2000
4000.3 IPV4_2: Add multi point to single point intents between h1 and h9 - PASS 2000
4000.4 SDNIP-ICMPVLAN: Add multi point to single point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
- PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case

...

6000: Test Multi to Single

...

End Point

...

Failure - 1 NODE(S) - OF 1.3 - Using Flow

...

Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 3000.1 NOOPTION: Install and test single point to multi point intents - PASS 3000
6000.2 IPV44 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components 3000.4 VLAN: Add single point to multi point intents - PASS 3000.5 VLAN: Add single point to multi point intents
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case

...

2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesONOS cluster

2.1 Apply cell to environment 4000.1 NOOPTION: Add multi point to single point intents - PASS 4000
2.2 IPV4: Add multi point to single point intents Uninstalling Atomix - PASS 4000
2.3 IPV4_2: Add multi point to single point intents Uninstalling ONOS package - PASS 4000
2.4 VLAN: Add multi point to single point intents Creating ONOS package - PASS 4000
2.5 VLAN: Add multi point to single point intents Installing Atomix - PASS 4000
2.6 ENCAPSULATION: Add multi point to single point intents Installing ONOS package - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS 5000.
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications 2 IPV4: Add host intents between h1 and h9 - PASS

Case

...

11: Start Mininet topology with OF 1.3

...

switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers
6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case

...

13: Create scapy components - PASS

Stopping the current mininet topology to start up fresh

13.1 Create scapy components - No Result
13.2 Start scapy components
18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case

...

15: Discover all hosts using scapy - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs 15.1 Send packets from each host to the first host and confirm onos discovery - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using Set up ONOS with 3 node(s) ONOS clustercluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 2.1 Apply cell to environment - PASS
2 1000.2 Uninstalling Atomix - DUALSTACK1: Add host intents between h3 and h11 - PASS 2
1000.3 Uninstalling ONOS package DUALSTACK2: Add host intents between h1 and h11 - PASS 2
1000.4 Creating ONOS package 1HOP: Add host intents between h1 and h3 - PASS
2 1000.5 Installing Atomix VLAN1: Add vlan host intents between h4 and h12 - PASS 2
1000.6 Installing ONOS package VLAN2: Add vlan host intents between h4 and h13 - PASS
2 1000.7 Set up ONOS secure SSH Encapsulation: Add host intents between h1 and h9 - PASS
2 1000.8 Checking ONOS service Confirm that ONOS leadership is unchanged - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

...

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow

...

Rules -

...

PASS

This test case tests Host will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

1000 3000.1 IPV4: Add host intents between h1 and h9 NOOPTION: Install and test single point to multi point intents - PASS 1000
3000.2 DUALSTACK1: Add host intents between h3 and h11 IPV4: Install and test single point to multi point intents - PASS 1000
3000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 single point to multi point intents - PASS 1000
3000.4 1HOPVLAN: Add host intents between h1 and h3 single point to multi point intents - PASS 1000
3000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 single point to multi point intents - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL

Assertion Result for VLAN Encapsulated host intent
Install Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow

...

Rules -

...

PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
After removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Failed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping FailedLink Down Connectivity Check Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology Intent State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Down Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.7 VLAN: Add point intents between h5 and h21 - FAIL

Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down
Assertion Result for VLAN IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent Partial failure isolation link Down Flow State PassedInitial Flow
Partial failure isolation link Down Topology State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.8 VLAN: Add point intents between h5 and h21 - FAIL

Assertion Result for VLAN IPV4 point intents with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.9 1HOP: Add point intents between h1 and h3 - FAIL

Assertion Result for 1HOP IPV4 with no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
After removing intents Flow State Passed

...

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000 2000.1 NOOPTION: Install and test single point to multi Add point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
After removing intents Flow State Passed

between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 3000.2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results Result for IPV4 single to multi point intent with IPV4 type and MAC addressesSDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State FailedPassed
Link Down Topology State Passed
Link Down Pingall PassedFailed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test
3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed
After removing intents Flow State Passed

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 3000.5 VLAN: Add single point to multi point intents - FAIL

Assertion results for single

PASS
3000.5 VLAN: Add single point to multi point

intent with VLAN treatmentAfter removing intents Flow State Passed

intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL

Assertion results for NOOPTION VLAN Encapsulation multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall PassedFailed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000 4000.2 IPV4: Add multi point to single point intents host intents between h1 and h9 - FAIL

Assertion results Assert result for IPV4 multi to single point intent with IPV4 type and MAC addresseshost intent between h1, moved, and h9
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State FailedPassed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set 4000.3 IPV4_2: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addressesno options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Connectivity Check Passed
Bad Sender Ping Passed
Bad Recipient Ping Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State FailedPassed
Link Down Topology State Passed
Link Down Pingall Connectivity Check PassedLink Up
Isolation link Down Passed
Link Up Isolation link Down Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
After removing intents Flow State Passed

4000.5 VLAN: Add multi point to single point intents - FAIL

Assertion results for multi to single point intent with VLAN ID treatment
After removing intents Flow State Passed

4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL

Assertion results for VLAN Encapsulation multi to single point intent
After removing intents Flow State Passed

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - FAIL

Assert result for IPV4 host intent between h1, moved, and h9
Install Intent State Failed
After removing intents Flow State Passed

...

6000

...

6000.1 Installing Multi to Single Point intents with no options set .3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State FailedPassed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point 4 NOOPTION: Install and test single point to multi point intents with partial failure failures allowed - FAIL

Assertion results for IPV4 single to multi to single point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State PassedFailed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
After removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
After removing intents Flow State Passed

...

Page tree

Page History

Versions Compared

Old Version 904

New Version 905

Key

Case 1: Pull onos branch and build onos on Teststation. - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case

5000:

Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.

0 - Using Flow

Objectives - FAIL

Case 6000: Test Multi to Single End Point Failure - 3

NODE(S) - OF 1.

0 - Using Flow

Objectives -

FAIL

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

Case

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS