Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published from Jenkins build: https://onos-jenkins.onlab.us/job/HAswapNodes/617/

...

  • 6.1 Checking ONOS Logs for errors - No Result (warning)
  • 6.2 Generate new metadata file - PASS (tick)
  • 6.3 Start new nodes - PASS (tick)
  • 6.4 Checking if ONOS is up yet - PASS (tick)
  • 6.5 Starting ONOS CLI sessions - PASS (tick)
  • 6.6 Checking ONOS nodes - FAIL (error)
    • Failed to rerun for election
  • 6.7 Reapplying cell variable to environment - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - FAIL (error)
    • Nodes check NOT successful
  • PASS (tick)

Case 3: Adding host Intents - FAIL

...

  • 3.1 Install reactive forwarding app - PASS (tick)
  • 3.2 Check app ids - PASS (tick)
  • 3.3 Discovering Hosts( Via pingall for now ) - PASS (tick)
  • 3.4 Uninstall reactive forwarding app - PASS (tick)
  • 3.5 Check app ids - FAIL (error)
    • Something is wrong with app Ids
  • PASS (tick)
  • 3.6 Add host intents via cli - PASS (tick)
  • 3.7 Intent Anti-Entropy dispersion - FAIL (error)

...

  • 9.1 Kill Link between s3 and s28 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - FAIL (error)
    • Nodes check NOT successful
  • PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

...

  • 10.1 Bring link between s3 and s28 back up - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - FAIL (error)
    • Nodes check NOT successful
  • PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

...

  • 4.1 Check Intent state - FAIL (error)
    • Intents are not all in INSTALLED state
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - FAIL (error)
    • Intents have not been installed correctly, pings failed.
  • PASS (tick)

Case 11: Killing a switch to ensure it is discovered correctly - PASS

  • 11.1 Kill s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - FAIL (error)
    • Nodes check NOT successful
  • PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

...

Case 12: Adding a switch to ensure it is discovered correctly - PASS

  • 12.1 Add back s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology -

...

PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - FAIL (error)
    • Nodes check NOT successful
  • PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

...