...
commit c2b82e396d7708d4e6ea53255cfe9badaf6717ac 9bead7fe46aff4556cdbd9b83618b4339b8aacae (HEAD, origin/master, origin/HEAD, mastertag: 1.8.4)
Author: Yuta HIGUCHI [y-higuchi@ak.jp.nec.comRay Milkey [ray@onlab.us]
AuthorDate: Fri Thu Mar 10 149 20:3313:41 03 2017 -0800
Commit: Andrea Campanella Ray Milkey [andrea@onlabray@onlab.us]
CommitDate: Sat Thu Mar 11 229 20:5213:58 03 2017 +0000
Ensure polling thread will not exceptionally terminate-0800
Tagging 1.8.4
Case 1: Constructing test variables and building ONOS package - PASS
...
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up Starting ONOS secure SSH service - PASS
- 2.6 Starting Set up ONOS service secure SSH - PASS
- 2.7 Start ONOS cli - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - PASS 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - PASS
...
- 6000.1 Installing Multi to Single Point intents with no options set - PASS 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single with partial failures allowedpoint intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
- Isolation link Down Flow State Passed
- Partial failure isolation Isolation link Down Topology State Passed
- Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State FailedPassed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State PassedFailed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check FailedPassed
- Partial failure isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
...
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up Starting ONOS secure SSH service - PASS
- 2.6 Starting Set up ONOS service secure SSH - PASS
- 2.7 Start ONOS cli - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - PASS 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - FAIL
- Assertion Result for VLAN Encapsulation Point Intent
...
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules -
...
FAIL
- 6000.1 Installing Multi to Single Point intents with no options set - PASS
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Starting ONOS service - PASS
- 2.7 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
- FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Failed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Set up ONOS secure SSH - PASS
- 2.7 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000 1000.1 NOOPTIONIPV4: Add point host intents between h1 and h9 - PASS 2000
- 1000.2 IPV4DUALSTACK1: Add point host intents between h1 h3 and h9 h11 - PASS
- 2000 1000.3 ProtectedDUALSTACK2: Add point host intents between h1 and h9 h11 - FAIL
- Assertion Result for protected point intent
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link down Scapy Packet Received Passed
- Protected Intent Check Passed
- Link Down Intent State Failed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS 2000.6 SDNIP-TCP: Add point intents between h1 and h9
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000
...
:
...
Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives -
...
FAIL
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 3000 2000.1 NOOPTION: Install and test single point to multi point intents Add point intents between h1 and h9 - PASS 3000
- 2000.2 IPV4: Install and test single point to multi point intents Add point intents between h1 and h9 - PASS
- 3000 2000.3 IPV4_2: Add single point to multi point intents between h1 and h9 - PASS 3000
- 2000.4 VLANSDNIP-ICMP: Add single point to multi point intents between h1 and h9 - PASS 3000
- 2000.5 VLANSDNIP-TCP: Add single point to multi point intents intents between h1 and h9 - PASS
Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV4: Add multi point to single point intents - PASS
- 4000.3 IPV4_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
- 4000.5 VLAN: Add multi point to single point intents - PASS
- 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.10 Add point to point intents using VLAN Encapsulation - FAIL
- Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
- Encapsulation intents check Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Recieved Failed
- Remove Intents Passed
Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV4: Add multi point to single point intents - PASS
- 4000.3 IPV4_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
- 4000.5 VLAN: Add multi point to single point intents - PASS
- 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
- 6000.1 Installing Multi to Single Point intents with no options set - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial
- 6000.1 Installing Multi to Single Point intents with no options set - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Passed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State PassedFailed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check FailedPassed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.4 NOOPTION: Install and test single point to multi point 2 Installing Multi to Single Point intents with partial failures failure allowed - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Starting ONOS service - PASS
- 2.7 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- FAIL
- Assertion results for IPV4 multi to single with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Passed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Failed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - FAIL
- Assertion Result for protected point intent
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link down Scapy Packet Received Passed
- Protected Intent Check Passed
- Link Down Intent State Failed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components
- 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 Add point to point intents using VLAN Encapsulation - PASS
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
...
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Set up ONOS secure SSH - PASS
- 2.7 Start ONOS cli - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 4000 1000.1 NOOPTIONIPV4: Add multi point to single point intents host intents between h1 and h9 - PASS 4000
- 1000.2 IPV4DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
- 1000.3 IPV4_2DUALSTACK2: Add multi point to single point intents host intents between h1 and h11 - PASS 4000
- 1000.4 VLAN1HOP: Add multi point to single point intents host intents between h1 and h3 - PASS 4000
- 1000.5 VLANVLAN1: Add multi point to single point intents vlan host intents between h4 and h12 - PASS 4000
- 1000.6 ENCAPSULATIONVLAN2: Add multi point to single point intents vlan host intents between h4 and h13 - PASS
...
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000 2000.2 IPV4: Add host point intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.10 Add point to point intents using VLAN Encapsulation - PASS
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV4: Add multi point to single point intents - PASS
- 4000.3 IPV4_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
- 4000.5 VLAN: Add multi point to single point intents - PASS
- 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL
- 6000.1 Installing Multi to Single Point intents with no options set
- 6000.1 Installing Multi to Single Point intents with no options set - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Failed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Passed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 multi to single to multi point intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State FailedPassed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State PassedFailed
- Partial failure isolation link Down Flow State FailedPassed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
...
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up Starting ONOS secure SSH service - PASS
- 2.6 Starting Set up ONOS service secure SSH - PASS
- 2.7 Start ONOS cli - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - PASS 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - PASS
...
- 6000.1 Installing Multi to Single Point intents with no options set - PASS
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options setwith partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down PassedIsolation
- Partial failure isolation link Down Intent State Passed
- Isolation Partial failure isolation link Down Flow State Passed
- Isolation Partial failure isolation link Down Topology State Passed
- Isolation Partial failure isolation link Down Connectivity Check FailedPassedIsolation
- Partial failure isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed 3 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi to single with partial failures allowedpoint intent with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
- Isolation link Down Flow State Passed
- Partial failure isolation Isolation link Down Topology State Passed
- Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State FailedPassed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State PassedFailed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check FailedPassed
- Partial failure isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
...
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up Starting ONOS secure SSH service - PASS
- 2.6 Starting Set up ONOS service secure SSH - PASS
- 2.7 Start ONOS cli - PASS
...
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - PASS 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - PASS
...
- 6000.1 Installing Multi to Single Point intents with no options set - PASS
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi to single point intent end point failure with no options setwith partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State FailedPassed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down PassedIsolation
- Partial failure isolation link Down Intent State PassedFailed
- Isolation Partial failure isolation link Down Flow State Passed
- Isolation Partial failure isolation link Down Topology State Passed
- Isolation Partial failure isolation link Down Connectivity Check PassedFailedIsolation
- Partial failure isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
Case 18: Stop Mininet and Scapy - PASS
...
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up Starting ONOS secure SSH service - PASS
- 2.6 Starting Set up ONOS service secure SSH - PASS
- 2.7 Start ONOS cli - PASS
...
- 1000.1 IPV4: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -
...
PASS
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesMininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - FAIL
- Assertion Result for protected point intent
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link down Scapy Packet Received Passed
- Protected Intent Check Passed
- Link Down Intent State Failed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - PASS
...
- 6000.1 Installing Multi to Single Point intents with no options set - PASS 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single with partial failures allowedpoint intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
- Isolation link Down Flow State Passed
- Partial failure isolation Isolation link Down Topology State Passed
- Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents PassedPassed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Starting ONOS service - PASS
- 2.7 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 1000.1 IPV4: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
...
- FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State Failed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
Case 18: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 18.1 Stopping and Removing Scapy Host Components - PASS
- 18.2 Stopping Mininet Topology - PASS
Case 19: Copy karaf logs - PASS
Copying the karaf logs to preserve them throughreinstalling ONOS
- 19.1 Copying karaf logs - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Uninstalling ONOS package - PASS
- 2.2 Apply cell to environment - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Set up ONOS secure SSH - PASS
- 2.7 Start ONOS cli - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 17: Enable intent compilation using Flow Objectives - PASS
- 17.1 Enabling Flow Objectives - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
This test case will test point to point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 2000 1000.1 NOOPTIONIPV4: Add point host intents between h1 and h9 - PASS 2000
- 1000.2 IPV4DUALSTACK1: Add point host intents between h1 h3 and h9 h11 - PASS
- 2000 1000.3 ProtectedDUALSTACK2: Add point host intents between h1 and h9 h11 - FAIL PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - FAIL
- Assertion Result for VLAN Encapsulated host intent
- Install Intent State Failed
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3
- Assertion Result for protected point intent
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link down Scapy Packet Received Passed
- Protected Intent Check Passed
- Link Down Intent State Failed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 9 1HOP: Add point intents between h1 and h3 - PASS
- 2000.11 10 Add point to point intents using VLAN Encapsulation - PASS FAIL
- Assertion Result for VLAN Encapsulation Point Intent
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
...
- 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
- 3000.5 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -
...
FAIL
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV4: Add multi point to single point intents - PASS
- 4000.3 IPV4_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
- 4000.5 VLAN: Add multi point to single point intents - PASS
- 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
- : Add multi point to single point intents - PASS
- 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
- Assertion results for VLAN Encapsulation multi to single point intent
Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL
- 6000.1
- 6000.1 Installing Multi to Single Point intents with no options set - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Passed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 Installing Multi to Single Point intents with partial failure allowed no options set - PASS
- 6000.3 NOOPTION: Install and test single point to multi point intents 2 Installing Multi to Single Point intents with partial failure allowed - FAIL
- Assertion results for IPV4 multi to single to multi point intent with no options setwith partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Failed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down PassedIsolation
- Partial failure isolation link Down Intent State Passed
- Isolation Partial failure isolation link Down Flow State Passed
- Isolation Partial failure isolation link Down Topology State Passed
- Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
- Partial failure isolation link Down Connectivity Check Passed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
- 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
- Assertion results for IPV4 single to multi point intent with partial failures allowed
- Install Intent State Passed
- Flow duration check Passed
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State FailedPassed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Partial failure isolation link Down Intent State PassedFailed
- Partial failure isolation link Down Flow State Passed
- Partial failure isolation link Down Topology State Passed
- Partial failure isolation link Down Connectivity Check Passed
- Partial failure isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
...