Page History

...

commit 66fee924a6f956e4edbf1cdcb4e9340a74851671 6c847764af5c3cb03cc60b9430274cdf40ac02d1 (HEAD, origin/master, origin/HEAD, master)
Author: Saritha Jordi Ortiz [sarithajordi.rt@samsungortiz@um.comes]
AuthorDate: Wed May 10 12:40:48 2017 +0530Mon Jan 30 17:13:05 2017 +0100
Commit: Thomas Vachuska Luca Prete [tom@onlabluca@onlab.us]
CommitDate: Thu Fri May 11 2212 21:3049:04 26 2017 +0000
Suspicious reference comparison - Questionable use of reference equality rather than calling equals
[ONOS-5934] MeterId availability after withdraw.

Case 1: Constructing test variables and building ONOS package - PASS

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 Protected: Add point intents between h1 and h9 - FAIL
• Assertion Result for protected point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link down Scapy Packet Received Passed
• Protected Intent Check Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents Passed
• PASS
• 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• Initial Iperf Passed
• Remove Intents Passed
• 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 VLAN: Add point intents between h5 and h21 - PASS
• 2000.10 1HOP: Add point intents between h1 and h3 - PASS
• 2000.11 Add point to point intents using VLAN Encapsulation - PASS
• 2000.12 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Bandwidth Allocation Failed

...

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

• 6000.1 Installing Multi to Single Point intents with no options set - PASS
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
• 6000.3 NOOPTION: Install and test single point to multi point intents - PASS
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Starting ONOS service - PASS
• 2.7 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS