Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 5: Setting up and gathering data for current state - FAIL
- 5.1 Check that each switch has a master - FAIL
- Some devices don't have a master assigned
- 5.2 Get the Mastership of each switch from each controller - PASS
- 5.3 Check for consistency in roles from each controller - PASS
- 5.4 Get the intents from each controller - PASS
- 5.5 Check for consistency in Intents from each controller - PASS
- 5.6 Get the flows from each controller - PASS
- 5.7 Check for consistency in Flows from each controller - PASS
- 5.8 Get the OF Table entries - No Result
- 5.9 Start continuous pings - No Result
- 5.10 Collecting topology information from ONOS - No Result
- 5.11 Host view is consistent across ONOS nodes - PASS
- 5.12 Each host has an IP address - PASS
- 5.13 Cluster view is consistent across ONOS nodes - PASS
- 5.14 Cluster view correct across ONOS nodes - PASS
- 5.15 Comparing ONOS topology to MN - PASS
- 5.16 Device information is correct - PASS
- 5.17 Links are correct - PASS
- 5.18 Hosts are correct - PASS
Case 14: Start Leadership Election app - PASS
- 14.1 Install leadership election app - PASS
- 14.2 Run for election on each node - PASS
- 14.3 First node was elected leader - PASS
Case 16: Install Primitives app - PASS
- 16.1 Install Primitives app - PASS
Case 17: Check for basic functionality with distributed primitives - FAIL
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment then get a default counter on each node - PASS
- 17.2 Get then Increment a default counter on each node - PASS
- 17.3 Counters we added have the correct values - PASS
- 17.4 Add -8 to then get a default counter on each node - PASS
- 17.5 Add 5 to then get a default counter on each node - PASS
- 17.6 Get then add 5 to a default counter on each node - PASS
- 17.7 Counters we added have the correct values - PASS
- 17.8 Distributed Set get - PASS
- 17.9 Distributed Set size - PASS
- 17.10 Distributed Set add() - PASS
- 17.11 Distributed Set addAll() - PASS
- 17.12 Distributed Set contains() - PASS
- 17.13 Distributed Set containsAll() - PASS
- 17.14 Distributed Set remove() - PASS
- 17.15 Distributed Set removeAll() - PASS
- 17.16 Distributed Set addAll() - PASS
- 17.17 Distributed Set clear() - PASS
- 17.18 Distributed Set addAll() - PASS
- 17.19 Distributed Set retain() - PASS
- 17.20 Partitioned Transactional maps put - PASS
- 17.21 Partitioned Transactional maps get - PASS
- 17.22 Get the value of a new value - PASS
- 17.23 Atomic Value set() - PASS
- 17.24 Get the value after set() - PASS
- 17.25 Atomic Value compareAndSet() - PASS
- 17.26 Get the value after compareAndSet() - PASS
- 17.27 Atomic Value getAndSet() - PASS
- 17.28 Get the value after getAndSet() - PASS
- 17.29 Atomic Value destory() - PASS
- 17.30 Get the value after destroy() - FAIL
- Error getting atomic Value None, found: ['baz', 'baz', 'baz', 'baz', 'baz']
- 17.31 Work Queue add() - PASS
- 17.32 Check the work queue stats - PASS
- 17.33 Work Queue addMultiple() - PASS
- 17.34 Check the work queue stats - PASS
- 17.35 Work Queue takeAndComplete() 1 - PASS
- 17.36 Check the work queue stats - PASS
- 17.37 Work Queue takeAndComplete() 2 - PASS
- 17.38 Check the work queue stats - PASS
- 17.39 Work Queue destroy() - PASS
- 17.40 Check the work queue stats - PASS