Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
commit 053682b8cf73e1500c3c126d04be840bd7991226 8f49a73a0d803da6a4b9c7587b98b1860417b26c (HEAD, origin/onos-1.11, onos-1.11)
Author: Yi Tseng [yi@opennetworking.org]
AuthorDate: Thu Fri Nov 9 1317 17:5414:12 41 2017 -0800
Commit: Charles Chan Yi Tseng [rascov@gmailyi@opennetworking.comorg]
CommitDate: Fri Nov 10 1217 17:3537:14 13 2017 -0800
[CORD-2228] Fix concurrent error when reactivate
Fix NPE of DHCP relay
HTML |
---|
<iframe src="https://onos-jenkins.onlab.us/job/HAfullNetPartition/plot/Plot-HA/getPlot?index=2&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe> |
...
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - PASS
- 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS
Case 4: Verify connectivity by sending traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 5: Setting up and gathering data for current state -
...
FAIL
- 5.1 Check that each switch has a master - PASS
- 5.2 Get the Mastership of each switch from each controller - No Result
- 5.3 Read device roles from ONOS - PASS
- 5.4 Check for consistency in roles from each controller - PASS
- 5.5 Get the intents from each controller - PASS
- 5.6 Check for consistency in Intents from each controller - PASS
- 5.7 Get the flows from each controller - PASS
- 5.8 Check for consistency in Flows from each controller - PASS
- 5.9 Get the OF Table entries - No Result
- 5.10 Start continuous pings - No Result
- 5.11 Collecting topology information from ONOS - No Result
- 5.12 Host view is consistent across ONOS nodes - PASS
- 5.13 Each host has an IP address - PASS
- 5.14 Cluster view is consistent across ONOS nodes - PASS
- 5.15 Cluster view correct across ONOS nodes - PASS
- 5.16 Comparing ONOS topology to MN - PASS
- 5.17 Device information is correct - PASS
- 5.18 Links are correct - PASS FAIL
- Links are incorrect
- 5.19 Hosts are correct - PASS
...
- 61.1 Checking ONOS Logs for errors - No Result
- 61.2 Partitioning ONOS nodes - PASS
- 61.3 Sleeping 60 seconds - No Result
Case 8: Compare ONOS Topology view to
...
Mininet
...
topology
...
Case 7: Running ONOS Constant State Tests - FAIL
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents from each controller - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Compare current intents with intents before the failure - FAIL
- The Intents changed during failure
- 7.7 Get the OF Table entries and compare to before component failure - FAIL
- Changes were found in the flow tables
- 7.8 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sending traffic across Intents - FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - FAIL
- Intents are not all in INSTALLED state
- 4.2 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - FAIL
- Intents have not been installed correctly, pings failed.
Case 15: Check that Leadership Election is still functional - PASS
- 15.1 Run for election on each node - PASS
- 15.2 Check that each node shows the same leader and candidates - PASS
- 15.3 Find current leader and withdraw - PASS
- 15.4 Check that a new node was elected leader - PASS
- 15.5 Check that that new leader was the candidate of old leader - PASS
- 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS
- 15.7 Check that oldLeader is a candidate, and leader if only 1 node - PASS
Case 17: Check for basic functionality with distributed primitives - PASS
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment then get a default counter on each node - PASS
- 17.2 Get then Increment a default counter on each node - PASS
- 17.3 Counters we added have the correct values - PASS
- 17.4 Add -8 to then get a default counter on each node - PASS
- 17.5 Add 5 to then get a default counter on each node - PASS
- 17.6 Get then add 5 to a default counter on each node - PASS
- 17.7 Counters we added have the correct values - PASS
- 17.8 Distributed Set get - PASS
- 17.9 Distributed Set size - PASS
- 17.10 Distributed Set add() - PASS
- 17.11 Distributed Set addAll() - PASS
- 17.12 Distributed Set contains() - PASS
- 17.13 Distributed Set containsAll() - PASS
- 17.14 Distributed Set remove() - PASS
- 17.15 Distributed Set removeAll() - PASS
- 17.16 Distributed Set addAll() - PASS
- 17.17 Distributed Set clear() - PASS
- 17.18 Distributed Set addAll() - PASS
- 17.19 Distributed Set retain() - PASS
- 17.20 Partitioned Transactional maps put - PASS
- 17.21 Partitioned Transactional maps get - PASS
- 17.22 Get the value of a new value - PASS
- 17.23 Atomic Value set() - PASS
- 17.24 Get the value after set() - PASS
- 17.25 Atomic Value compareAndSet() - PASS
- 17.26 Get the value after compareAndSet() - PASS
- 17.27 Atomic Value getAndSet() - PASS
- 17.28 Get the value after getAndSet() - PASS
- 17.29 Atomic Value destory() - PASS
- 17.30 Get the value after destroy() - PASS
- 17.31 Work Queue add() - PASS
- 17.32 Check the work queue stats - PASS
- 17.33 Work Queue addMultiple() - PASS
- 17.34 Check the work queue stats - PASS
- 17.35 Work Queue takeAndComplete() 1 - PASS
- 17.36 Check the work queue stats - PASS
- 17.37 Work Queue takeAndComplete() 2 - PASS
- 17.38 Check the work queue stats - PASS
- 17.39 Work Queue destroy() - PASS
- 17.40 Check the work queue stats - PASS
...