Page History

...

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS FAIL
• Assertion result for IPV4 host intent with mac addresses
• Install Intent State Failed
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• Install Intent State Failed
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS FAIL
• Assertion Result for dualstack2 host intent
• Install Intent State Failed
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS FAIL
• Assertion Result for 1HOP for IPV4 same switch
• Install Intent State Failed
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS FAIL
• Assertion Result vlan IPV4
• Install Intent State Failed
• 1000.6 1000.6 Confirm that ONOS leadership is unchanged - PASS FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS FAIL
• Assertion Result for NOOPTION point intent
• Install Intent State Failed
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS FAIL
• Assertion Result for IPV4 point intent
• Install Intent State Failed
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Failed
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS 2000.5 FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP
: Add
• point intents
between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• 3000.2 IPV4: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
• 3000.3 IPV4_2: Add single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
• 3000.4 VLAN: Add single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
• 3000.5 VLAN: Add single point to multi point intents - FAIL
• Assertion results for single to multi point intent with VLAN treatment

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 18.1 Stopping and Removing Scapy Host Components - PASS
• 18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• Install Intent State Failed
19.1 Copying karaf logs - PASS