Page History

...

<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCintent_onos-2.2_20-builds_graph.jpg", alt="FUNCintent", style="width:525px;height:350px;border:0">

commit 3831f0c81151377330610cb85eb9ac5da7996d7e a800c001e939e96936ddd1d62d41b78ebb49a162 (HEAD, origin/onos-2.2, onos-2.2)
Author: Jian Li [pyguni@gmail.com]
AuthorDate: Fri Mar 12 1819 15:03:58 32 2021 +0900
Commit: Jian Li [pyguni@gmail.com]
CommitDate: Fri Sat Mar 12 20 01:0725:32 00 2021 +0900
Support to allocate/release IP address for multiple networks
Minor fix on floating IP and SNAT feature at kubevirt networking

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP 2000.2 IPV4: Add point intents between h1 and h9 h3 - FAIL
• Assertion Result for IPV4 point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS
• 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS
• 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Link Up Intent State PassedLink Up
• Isolation link Down Flow State PassedLink Up Topology State
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down
• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down PassedIsolation
• Partial failure isolation link Down Intent State Passed
• Isolation Partial failure isolation link Down Flow State Passed
• Isolation Partial failure isolation link Down Topology State Failed
• Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter FailedAfter removing intents Flow State Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed .3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi to single with partial failures allowedpoint intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
• Isolation link Down Flow State Passed
• Partial failure isolation Isolation link Down Topology State Failed
• Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State FailedPassed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents FailedAfter removing intents Flow State Passed
• 6000.3 4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with no options setpartial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down PassedIsolation
• Partial failure isolation link Down Intent State Passed
• Isolation Partial failure isolation link Down Flow State Passed
• Isolation Partial failure isolation link Down Topology State Failed
• Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
• Partial failure isolation link Down Connectivity Check PassedFailed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents FailedAfter removing intents Flow State Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Packet Recieved Failed
• Remove Intents FailedAfter
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• After removing intents Flow State Passed

...

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of with OF 1.0 switches - PASS

Case

...

12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers 17.1 Enabling Flow Objectives - PASS

Case

...

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

...

13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test point to point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000 1000.1 NOOPTIONIPV4: Add point host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

• 2000.1 NOOPTION
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Failed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK12 IPV4: Add point intents between h3 h1 and h11 h9 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP 2000.7 VLAN: Add point intents between h5 h1 and h21 h9 - PASS
• 2000.8 VLAN5 SDNIP-TCP: Add point intents between h5 h1 and h21 h9 - PASS
• 2000.9 1HOP6 DUALSTACK1: Add point intents between h1 h3 and h3 h11 - PASS
• 2000.10 7 VLAN: Add point to point intents using VLAN Encapsulation - FAIL
• Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
• Encapsulation intents check failed
• Flow duration check Passed
• Initial Intent State Passed
• Intial Flow State Failed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Failed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS
Remove Intents PassedAfter removing intents Flow State Passed
• 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Failed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• check Failed
• After Remove Intents PassedAfter removing intents Flow State Passed

...

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

...

• 11.1 Starting Mininet topology with OF 1.3 OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case

...

17: Enable intent compilation using Flow Objectives - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers 17.1 Enabling Flow Objectives - PASS

Case

...

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

...

1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case tests Host will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesFlow Objectives

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.2 IPV4: Add point 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
• 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
• 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• FAIL
• Assertion Result for IPV4 point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.3 IPV4_2 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS PASS
• 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intent
• Install Intent State Passed
• Bandwidth Allocation check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

...

• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Failed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Recieved Failed
• Remove Intents FailedAfter removing intents Flow State Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents FailedAfter removing intents Flow State Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received PassedRecieved Failed
• Remove Intents FailedAfter removing intents Flow State Passed

...

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed
• h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall Failed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 VLAN: Add point intents between h5 and h21 - PASS
• 2000.9 1HOP: Add point intents between h1 and h3 - PASS
• 2000.10 Add point to point intents using VLAN Encapsulation - PASS 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 VLAN Encapsulation - FAIL
• Assertion Result for BANDWIDTH ALLOCATION for point intentInstall VLAN Encapsulation Point IntentInstall Intent State Passed
• Bandwidth Allocation Encapsulation intents check Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Ping PassedFailed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Pingall FailedLink Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 3000.1 NOOPTION: Install and test single point to multi point intents - PASS
• 3000.2 IPV4: Install and test single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS
• 3000.5 VLAN: Add single point to multi point intents - PASS

...

• Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000 3000.1 NOOPTION: Add multi Install and test single point to single multi point intents - PASS 4000
• 3000.2 IPV4: Add multi Install and test single point to single multi point intents - PASS
• 4000 3000.3 IPV4_2: Add multi single point to single multi point intents - PASS
• 4000 3000.4 VLAN: Add multi single point to single multi point intents - PASS 4000
• 3000.5 VLAN: Add multi single point to single point intents - PASS 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case

...

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

...

4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using

...

Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS
• 4000.5 VLAN: Add multi point to single point intents - PASS
• 4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

• 6000.1 Installing Multi to Single Point intents with no options set
• 6000.1 Installing Multi to Single Point intents with no options set - FAIL
• Assertion results for IPV4 multi to single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Isolation link Down Intent State Passed
• Isolation link Down Flow State Passed
• Isolation link Down Topology State Failed
• Isolation link Down Connectivity Check Passed
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single with partial failures allowedto single point intent end point failure with no options set
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
• Isolation link Down Flow State Passed
• Partial failure isolation Isolation link Down Topology State Failed
• Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
• Isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter removing intents Flow State Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents 2 Installing Multi to Single Point intents with partial failure allowed - FAIL
• Assertion results for IPV4 multi to single to multi point intent with no options setwith partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down PassedIsolation
• Partial failure isolation link Down Intent State Passed
• Isolation Partial failure isolation link Down Flow State Passed
• Isolation Partial failure isolation link Down Topology State Failed
• Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State PassedFailed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received PassedRecieved Failed
• Remove Intents PassedAfter FailedAfter removing intents Flow State Passed
• 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL
• Assertion results for IPV4 single to multi point intent with no options set
• After removing intents Flow State Passed
• 6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL
• Assertion results for IPV4 single to multi point intent with partial failures allowed
• Install Intent State Passed
• Flow duration check Passed
• Initial Intent State Passed
• Initial Flow State Passed
• Initial Connectivity Check Passed
• Link Down Passed
• Link Down Passed
• Link Down Intent State Passed
• Link Down Flow State Passed
• Link Down Topology State Passed
• Link Down Connectivity Check Passed
• Isolation link Down Passed
• Partial failure isolation link Down Intent State Passed
• Partial failure isolation link Down Flow State Passed
• Partial failure isolation link Down Topology State Failed
• Partial failure isolation link Down Connectivity Check Passed
• Partial failure isolation link Down Connectivity Check Passed
• Link Up Passed
• Link Up Passed
• Link Up Passed
• Link Up Intent State Passed
• Link Up Flow State Passed
• Link Up Topology State Passed
• Link Up Scapy Packet Received Passed
• Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

...