Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
HTML |
---|
<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCnetCfg_master_20-builds_graph.jpg", alt="FUNCnetCfg", style="width:525px;height:350px;border:0"> |
commit 1e0f3e8d797e3195ce36950c96c11211f5b98c08 a137fba6bccf30252195eaccef0bd2bd9851066b (HEAD, origin/master, origin/HEAD, master)
Author: Jian Li pierventre [pyguni@gmailpier@opennetworking.comorg]
AuthorDate: Thu Mon Jun 17 1114 20:0628:36 35 2021 +09000200
Commit: Jian Li [pyguni@gmail.comPier Luigi Ventre [pier@opennetworking.org]
CommitDate: Fri Mon Jun 18 0121 15:2746:06 52 2021 +0000
Not add node into the cluster if it is tainted with kubevirt.io key
--
(cherry picked from commit 552314f8e0c66bc94d2e1070fbb3ca4ac2f841e7)
[SDFAB-21] Handle the VERIFY operation in the fabric pipeliner
Case 1: Pull onos branch and build onos on Teststation. - PASS
...
- 25.1 Moving network-cfg.json to $ONOS_ROOT/tools/package/config/ - PASS
Case 2: Starting up 5 node(s) ONOS cluster -
...
FAIL
Case 2: Starting up 5 node(s) ONOS cluster
...
-
...
Case 20: Add Network configurations to the cluster - PASS
Add Network Configurations for devices not discovered yet. One device is allowed, the other disallowed.
- 20.1 Add Net Cfg for switch1 - PASS
- 20.2 Add Net Cfg for switch3 - PASS
- 20.3 Check net config - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
...
FAIL
...
- 27.1 Get json object from Net Cfg - No Result
- 27.2 Posting json object to Net Cfg - No Result
- 27.3 Compare device with ONOS - No Result
- 27.4 Check net config - FAIL
- Check Net Cfg failed. Check above messages.
- 27.5 ONOS should only show devices S1, S2, S4, S5 and S6 - PASS
- 27.6 Modify json object so S6 is disallowed - PASS
Case 26: Check to see if the pre-startup configurations were set, then remove their allowed status - PASS
- 26.1 Checking configurations for Switches 5 and 6 - No Result
- 26.2 ONOS should only show devices S1, S2, S4, and S5 - PASS
- 26.3 Removing allowed status from Switches 5 and 6 - No Result
Case 21: Check Devices After they initially connect to ONOS - PASS
- 21.1 Check net config - PASS
- 21.2 ONOS should only show devices S1, S2, and S4 - PASS
- 21.3 Check device annotations - PASS
Case 22: Add Network configurations for connected devices to the cluster - PASS
Add Network Configurations for discovered devices. One device is allowed, the other disallowed.
- 22.1 Add Net Cfg for switch2 - PASS
- 22.2 Add Net Cfg for switch4 - PASS
- 22.3 Check net config - PASS
Case 23: Check Devices after all configurations are set - PASS
- 23.1 Check net config - PASS
- 23.2 ONOS should only show devices S1 and S2 - PASS
- 23.3 Check device annotations - PASS
Case 24: Testing removal of configurations - PASS
...