Page History

...

Case 4: Ping across added host intents - PASS

Case 5: Setting up and gathering data for current state -

...

PASS

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch from each controller - PASS
• 5.3 Check for consistency in roles from each controller - FAIL PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 Check for consistency in Intents from each controller - PASS
• 5.6 Get the flows from each controller - PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Create TestONTopology object - No Result
• 5.11 Collecting topology information from ONOS - PASS
• 5.12 Comparing ONOS topology to MN - FAIL PASS

Case 14: Start Leadership Election app - PASS

...

• 16.1 Install Primitives app - PASS

Case 17: Check for basic functionality with distributed primitives -

...

FAIL

• 17.1 Increment and get a default counter on each node - PASS
• 17.2 Increment and get an in memory counter on each node - PASS
• 17.3 Check counters are consistant across nodes - PASS
• 17.4 Counters we added have the correct values - PASS
• 17.5 Distributed Set get - PASS
• 17.6 Distributed Set size - PASS
• 17.7 Distributed Set add() - PASS
• 17.8 Distributed Set addAll() - PASS
• 17.9 Distributed Set contains() - PASS
• 17.10 Distributed Set containsAll() - PASS
• 17.11 Distributed Set remove() - PASS
• 17.12 Distributed Set removeAll() - PASS
• 17.13 Distributed Set addAll() - PASS
• 17.14 Distributed Set clear() - PASS
• 17.15 Distributed Set addAll() - PASS
• 17.16 Distributed Set retain() - PASS FAIL

Case 6: Restart entire ONOS cluster - PASS

...

• 6.1 Killing ONOS nodes - No Result
• 6.2 Checking if ONOS is up yet - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

• 8.1 Create TestONTopology object - No Result
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• 8.4 Checking ONOS nodes - No Result

Case 3: Adding host Intents - PASS

• 3.1 Discovering Hosts( Via pingall for now ) - PASS
• 3.2 Add host intents - PASS

Case 7: Running ONOS Constant State Tests - FAIL

• 7.1 Check that each switch has a master - PASS
• 7.2 Check for consistency in roles from each controller - PASS
• 7.3 Compare switch roles from before failure - FAIL
• 7.4 Get the intents and compare across all nodes - PASS
• 7.5 Check for consistency in Intents from each controller - FAIL
• 7.6 Get the OF Table entries and compare to before component failure - FAIL
• 7.7 Check the continuous pings to ensure that no packets were dropped during component failure - FAIL

Case 4: Ping across added host intents - PASS

Case 15: Check that Leadership Election is still functional - FAIL

• 15.1 Find current leader and withdraw - FAIL
• 15.2 Make sure new leader is elected - FAIL
• 15.3 Run for election on old leader( just so everyone is in the hat ) - FAIL

Case 17: Check for basic functionality with distributed primitives - FAIL

• 17.1 Increment and get a default counter on each node - PASS
• 17.2 Increment and get an in memory counter on each node - PASS
• 17.3 Check counters are consistant across nodes - PASS
• 17.4 Counters we added have the correct values - PASS
• 17.5 Distributed Set get - PASS
• 17.6 Distributed Set size - PASS
• 17.7 Distributed Set add() - PASS
• 17.8 Distributed Set addAll() - PASS
• 17.9 Distributed Set contains() - PASS
• 17.10 Distributed Set containsAll() - PASS
• 17.11 Distributed Set remove() - PASS
• 17.12 Distributed Set removeAll() - PASS
• 17.13 Distributed Set addAll() - PASS
• 17.14 Distributed Set clear() - FAIL
• 17.15 Distributed Set addAll() - PASS
• 17.16 Distributed Set retain() - PASS

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

• 8.1 Create TestONTopology object - No Result
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - PASS
• 8.4 Checking ONOS nodes - No Result

Case 4: Ping across added host intents - PASS

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

• 8.1 Create TestONTopology object - No Result
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - PASS
• 8.4 Checking ONOS nodes - No Result

Case 4: Ping across added host intents - PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

• 8.1 Create TestONTopology object - No Result
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - PASS
• 8.4 Checking ONOS nodes - No Result

Case 4: Ping across added host intents - PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

• 8.1 Create TestONTopology object - No Result
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - PASS
• 8.4 Checking ONOS nodes - No Result

Case 4: Ping across added host intents - PASS

Case 13: Test Cleanup - PASS

• 13.1 Killing tcpdumps - No Result
• 13.2 Copying MN pcap and ONOS log files to test station - No Result
• 13.3 Stopping Mininet - No Result
• 13.4 Checking ONOS Logs for errors - No Result
• 13.5 Packing and rotating pcap archives - PASS