Page History

...

commit 74d32fdb14f8ccda88e01a856fedea215a5f983f 177ece60f3a9de6c0cd00b211f05c429979a634d (HEAD, origin/master, origin/HEAD, master)
Author: samanwita pal Thomas Vachuska [sam@onlabtom@onlab.us]
AuthorDate: Thu Fri Jun 25 0926 00:2218:09 21 2015 -0700
Commit: samanwita pal [sam@onlabGerrit Code Review [gerrit@onlab.us]
CommitDate: Thu Fri Jun 25 0926 07:3028:28 23 2015 -0700
Added unit tests for Versioned and MultiValuedTimestamp classes+0000

Fixed STC defect where a dependency would bring out an otherwise inactive step.

<iframe src="https://onos-jenkins.onlab.us/job/HASingleInstanceRestart/plot/Plot-HA/getPlot?index=0&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 2.1 Assign switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - PASS FAIL
• Topology Check Test NOT successful

Case 3: Adding host Intents - PASS

...

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 5: Setting up and gathering data for current state -

...

FAIL

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch - No Result
• 5.3 Get the intents from each controller - No Result
• 5.4 Get the flows from each controller - No Result
• 5.5 Get the OF Table entries - No Result
• 5.6 Create TestONTopology object - No Result
• 5.7 Collecting topology information from ONOS - No Result
• 5.8 Each host has an IP address - PASS
• 5.9 There is only one dataplane cluster - PASS FAIL
• ONOS shows 2 SCCs
• 5.10 Comparing ONOS topology to MN - PASS FAIL
• Topology Check Test NOT successful

Case 14: Start Leadership Election app - PASS

...

• 6.1 Killing ONOS processes - PASS
• 6.2 Checking if ONOS is up yet - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• Topology Check Test NOT successful

Case 3: Adding host Intents -

...

PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - FAIL
• Reactive Pingall failed, one or more ping pairs failed
• PASS
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - PASS

...

• 7.1 Check that each switch has a master - PASS
• 7.2 Check if switch roles are consistent across all nodes - PASS
• 7.3 Compare switch roles from before failure - PASS
• 7.4 Get the intents and compare across all nodes - PASS
• 7.5 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• 7.6 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 15: Check that Leadership Election is still functional - PASS

...

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• Topology Check Test NOT successful

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

...

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• Topology Check Test NOT successful

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• Topology Check Test NOT successful

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.
• PASS

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Create TestONTopology object - PASS
• 8.2 Comparing ONOS topology to MN - No Result
• 8.3 Collecting topology information from ONOS - FAIL
• Topology Check Test NOT successful

Case 4: Verify connectivity by sendind traffic across Intents -

...

PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• PASS
• 4.2 Check Intent state - FAIL
Intents are not all in INSTALLED state
• PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
Intents have not been installed correctly, pings failed.
• PASS

Case 13: Test Cleanup - PASS

...