Page History

...

HTML
<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCintent_master_20-builds_graph.jpg", alt="FUNCintent", style="width:525px;height:350px;border:0">

commit 2d77c1a0498e7b8462b8040c5a25408e214ee164 efb6cc53df699e2e9efb8ccfd96af0d539f918be (HEAD -] master, origin/master, origin/HEAD)
Author: ONOS Jenkins User [jenkins@onlab.usRay Milkey [ray@opennetworking.org]
AuthorDate: Fri Wed Apr 19 1724 13:2445:24 18 2019 +0000-0700
Commit: ONOS Jenkins User [jenkins@onlab.usRay Milkey [ray@opennetworking.org]
CommitDate: Fri Wed Apr 19 1724 22:2411:24 05 2019 +0000
Starting snapshot 2.1.0-SNAPSHOT
Fix build behind web proxy - provide all jars needed by grpc java

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

...

FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

...

FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

4000 3000.1 NOOPTION: Add multi Install and test single point to single multi point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed
After removing intents Flow State Failed

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.5 VLAN: Add single point to multi point intents - FAIL

Assertion results for single to multi point intent with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

This test case will test single point to multi point intents using 1 This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

2000 4000.1 NOOPTION: Add multi point to single point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
- FAIL

Assertion results for NOOPTION multi to single point intent
Install Intent State Passed
Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Initial Bad Recipient Ping FailedPassed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Pingall FailedPassed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State PassedFailed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

2000.5 SDNIP-TCP 4000.2 IPV4: Add multi point to single point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

- FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.3 IPV4_2: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.5 VLAN 4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
FAIL

Assertion results for multi to single point intent with VLAN ID treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.6 ENCAPSULATION 4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

...

FAIL

Assertion results for VLAN Encapsulation multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules -

...

FAIL

6000 5000.1 Installing Multi to Single Point intents with no options set Testing host mobility by moving h1 from s5 to s6 - PASS 6000
5000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

IPV4: Add host intents between h1 and h9 - FAIL

Assert result for IPV4 host intent between h1, moved, and h9
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Failed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Failed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Failed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Failed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point 1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000 2000.2 6 DUALSTACK1: Add host point intents between h3 and h11 - PASS 1000
2000.3 DUALSTACK27 VLAN: Add host point intents between h1 h5 and h11 h21 - PASS 1000
2000.4 1HOP8 VLAN: Add host point intents between h1 h5 and h3 h21 - PASS
1000 2000.5 VLAN19 1HOP: Add vlan host point intents between h4 h1 and h12 h3 - PASS 1000
2000.6 VLAN2: Add vlan host intents between h4 and h13 10 Add point to point intents using VLAN Encapsulation - PASS
1000.7 Encapsulation: Add host 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 3000: Single to Multi Point Intents Test -

...

3 NODE(S) - OF 1.0 - Using Flow

...

Rules -

...

PASS

This test case will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow ObjectivesRules

2000 3000.1 NOOPTION: Add Install and test single point to multi point intents between h1 and h9 - PASS 2000
3000.2 IPV4: Add Install and test single point to multi point intents between h1 and h9 - PASS
2000 3000.3 IPV4_2: Add single point to multi point intents between h1 and h9 - PASS 2000
3000.4 SDNIP-ICMPVLAN: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 single point to multi point intents - PASS 2000
3000.6 DUALSTACK15 VLAN: Add single point to multi point intents between h3 and h11 - PASS 2000.7 VLAN: Add point intents between h5

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents and h21 - PASS 2000.8 VLAN: Add point intents between h5
and h21 4000.2 IPV4: Add multi point to single point intents - PASS 2000
.9 1HOP 4000.3 IPV4_2: Add multi point to single point intents between h1 and h3 - PASS
2000 4000.10 4 VLAN: Add multi point to single point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

- PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case

...

5000:

...

Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow

...

Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 3000.1 NOOPTION: Install and test single point to multi point intents - PASS 3000
6000.2 IPV44 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs 3000.5 VLAN: Add single point to multi point intents - PASS

Case

...

2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

...

NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 3000.1 NOOPTION: Install and test single point to multi point intents - PASS 1000
3000.4 1HOP: Add host intents between h1 and h3 2 IPV4: Install and test single point to multi point intents - PASS 1000.5 VLAN1: Add vlan host intents between h4 and h12
3000.3 IPV4_2: Add single point to multi point intents - PASS
1000 3000.6 VLAN24 VLAN: Add vlan host intents between h4 and h13 single point to multi point intents - PASS 1000
3000.7 Encapsulation5 VLAN: Add host intents between h1 and h9 single point to multi point intents - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 4000: Multi To Single Point Intents Test -

...

1 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000 4000.1 NOOPTION: Add point intents between h1 and h9 multi point to single point intents - PASS 2000
4000.2 IPV4: Add multi point to single point intents between h1 and h9 - PASS 2000
4000.3 IPV4_2: Add multi point to single point intents between h1 and h9 - FAIL - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Failed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping PassedLink Down Connectivity Check Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology Intent State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Down Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.7 VLAN: Add point intents between h5 and h21 - FAIL

Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down
Assertion Result for VLAN IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000 6000.8 VLAN: Add point intents between h5 and h21 3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion Result results for VLAN IPV4 single to multi point intents with VLAN treatmentintent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000 6000.9 1HOP: Add point intents between h1 and h3 4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion Result results for 1HOP IPV4 with no mac address point intentssingle to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Failed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Failed
After removing intents Flow State Passed

...

Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow ObjectivesOVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent

3000.1 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed
After removing intents Flow State Passed

3000.4 VLAN: Add single point to multi point intents 2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion results Result for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

3000.5 VLAN 2000.3 IPV4_2: Add single point to multi point intents intents between h1 and h9 - FAIL

Assertion results for single to multi point intent with VLAN treatmentResult for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion results for NOOPTION multi to single point intentResult for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall PassedFailed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

4000.2 IPV4 2000.5 SDNIP-TCP: Add multi point to single point intents between h1 and h9 - FAIL

Assertion results Result for IPV4 multi to single point intent with IPV4 type and MAC addressesSDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failedInstall Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping PassedFailed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.3 IPV4_2: Add multi point to single point intents 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Failed
After removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION 4000.5 VLAN: Add multi point to single point intents - FAIL

Assertion results for multi to single point intent with VLAN ID treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN 4000.6 ENCAPSULATION: Add multi point to single point intents - FAIL
Assertion results for VLAN Encapsulation multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed

Remove Intents FailedAfter removing intents Flow State Passed

PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives -

...

PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assert result Assertion results for IPV4 host intent between h1, moved, and h9single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Connectivity Check Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow Intent State Passed
Link Down Topology Flow State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

...

Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000 4000.1 IPV4NOOPTION: Add host intents between h1 and h9 multi point to single point intents - PASS 1000
4000.2 DUALSTACK1IPV4: Add host intents between h3 and h11 multi point to single point intents - PASS 1000
4000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 multi point to single point intents - PASS 1000
4000.4 1HOPVLAN: Add host intents between h1 and h3 multi point to single point intents - PASS 1000
4000.5 VLAN1VLAN: Add vlan host intents between h4 and h12 multi point to single point intents - PASS 1000
4000.6 VLAN2ENCAPSULATION: Add vlan host intents between h4 and h13 multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
1000 5000.7 Encapsulation2 IPV4: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules

...

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

...

- PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point tests Host intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000 1000.1 NOOPTIONIPV4: Add multi point to single point intents host intents between h1 and h9 - PASS 4000
1000.2 IPV4DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
1000.3 IPV4_2DUALSTACK2: Add multi point to single point intents host intents between h1 and h11 - PASS 4000
1000.4 VLAN1HOP: Add multi point to single point intents host intents between h1 and h3 - PASS 4000
1000.5 VLANVLAN1: Add multi point to single point intents vlan host intents between h4 and h12 - PASS 4000
1000.6 ENCAPSULATIONVLAN2: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation
5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case

...

2000:

...

Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules -

...

FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 6000.1 Installing Multi to Single Point intents with no options set - PASS 6000
2000.2 Installing Multi to Single Point intents with partial failure allowed IPV4: Add point intents between h1 and h9 - PASS
6000 2000.3 NOOPTION: Install and test single point to multi point intents IPV4_2: Add point intents between h1 and h9 - PASS 6000
2000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

...

SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4
1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 h9 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

...

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Objectives - PASS

This test case will test single point to multi point tests Host intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow RulesObjectives

4000 1000.1 NOOPTIONIPV4: Add multi point to single point intents host intents between h1 and h9 - PASS 4000
1000.2 IPV4DUALSTACK1: Add multi point to single point intents host intents between h3 and h11 - PASS 4000
1000.3 IPV4_2DUALSTACK2: Add multi point to single point intents host intents between h1 and h11 - PASS 4000
1000.4 VLAN1HOP: Add multi point to single point intents host intents between h1 and h3 - PASS 4000
1000.5 VLANVLAN1: Add multi point to single point intents vlan host intents between h4 and h12 - PASS 4000
1000.6 ENCAPSULATIONVLAN2: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 vlan host intents between h4 and h13 - PASS
5000 1000.2 IPV47 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case

...

2000:

...

Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Objectives -

...

FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS
6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

...

Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000 4000.1 IPV4NOOPTION: Add host intents between h1 and h9 multi point to single point intents - PASS 1000
4000.2 DUALSTACK1IPV4: Add host intents between h3 and h11 multi point to single point intents - PASS 1000
4000.3 DUALSTACK2IPV4_2: Add host intents between h1 and h11 multi point to single point intents - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS 1000.8 Confirm that ONOS leadership is unchanged - PASS

Case

...

6000:

...

Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intentresults for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping FailedLink Down Connectivity Check Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology Intent State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Down Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up
Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

2000 6000.3 IPV4_2: Add point intents between h1 and h9 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion Result results for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Failed
After removing intents Flow State Passed

...

single to multi point intent with no options set
After removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
After removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

This test case will test single point to multi point intents using 1 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Failed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV4 with mac address point intents

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check PassedLink Down Ping Passed
Link Down Passed
Link Down Intent State PassedFailed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Down Topology State Passed
Link Up Down Pingall Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation 6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options setInstall Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State PassedLink Down Connectivity Check
Initial Ping Passed
Isolation link Link Down PassedIsolation link
Link Down Intent State PassedFailed
Isolation link Link Down Flow State PassedIsolation
link Link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion results for IPV4 single to multi Result for BANDWIDTH ALLOCATION for point intent with partial failures allowed
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check PassedLink Down Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State PassedPartial failure isolation link Failed
Link Down Flow State Passed
Partial failure isolation link Link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Failed
Link Up Passed
Link Up Link Down Pingall Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

Case

...

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

...

cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping FailedConnectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Link Up Intent State PassedLink Up
Partial failure isolation link Down Flow State Passed
Link Up Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Passed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Passed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.1 Installing Multi to Single Point intents with no options set - PASS
6000.2 Installing Multi to Single Point intents with partial failure allowed - PASS
6000.3 NOOPTION: Install and test single point to multi point intents - PASS

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - PASS

Case 18: Stop Mininet and Scapy - PASS

...

Page tree

Page History

Versions Compared

Old Version 806

New Version 807

Key

Case 1: Pull onos branch and build onos on Teststation. - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

FAIL

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules -

FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 3000: Single to Multi Point Intents Test -

3 NODE(S) - OF 1.0 - Using Flow

Rules -

PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case

5000:

Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow

Rules - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case

2: Starting up 1 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 3000: Single to Multi Point Intents Test - 1

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS