...
commit a92936379381dc6a6f90652cd9638659f8c2cacf a69534f1694e2b8e190e6eb96513843846e19e93 (HEAD, origin/master, origin/HEAD, master)
Author: Hari Krishna Sahil Lele [hari@onlabsahil@onlab.us]
AuthorDate: Thu Jul 16 1615:4314:40 57 2015 -0700
Commit: Gerrit Code Review [gerrit@onlabSahil Lele [sahil@onlab.us]
CommitDate: Fri Jul 17 0315:2118:01 40 2015 +0000-0700
wipe-out command changes to purge intents
ONOS-2379 Reactive Fwd improvements prune bad flows from switches when a link goes down
HTML |
---|
<iframe src="https://onos-jenkins.onlab.us/job/HAClusterRestart/plot/Plot-HA/getPlot?index=0&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe> |
...
- 16.1 Install Primitives app - PASS
Case 17: Check for basic functionality with distributed primitives -
...
FAIL
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment and get a default counter on each node - PASS FAIL
- Error incrementing default counter
- 17.2 Increment and get an in memory counter on each node - PASS FAIL
- Error incrementing in memory counter
- 17.3 Check counters are consistant across nodes - PASS
- 17.4 Counters we added have the correct values - PASS
- 17.5 Distributed Set get - PASS
- 17.6 Distributed Set size - PASS
- 17.7 Distributed Set add() - PASS
- 17.8 Distributed Set addAll() - PASS
- 17.9 Distributed Set contains() - PASS
- 17.10 Distributed Set containsAll() - PASS
- 17.11 Distributed Set remove() - PASS
- 17.12 Distributed Set removeAll() - PASS
- 17.13 Distributed Set addAll() - PASS
- 17.14 Distributed Set clear() - PASS
- 17.15 Distributed Set addAll() - PASS
- 17.16 Distributed Set retain() - PASS
...
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - FAIL
- Reactive Pingall failed, one or more ping pairs failed
- 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS
Case 7: Running ONOS Constant State Tests -
...
FAIL
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents and compare across all nodes - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Get the OF Table entries and compare to before component failure - PASS FAIL
- Changes were found in the flow tables
- 7.7 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS 4.4 Wait a minute then ping again - PASS
- 4.4 Wait a minute then ping again - FAIL
- Intents have not been installed correctly, pings failed.
Case 15: Check that Leadership Election is still functional - PASS
...
- 15.1 Run for election on each node - PASS
- 15.2 Check that each node shows the same leader - PASS
- 15.3 Find current leader and withdraw - PASS
- 15.4 Make sure new leader is elected - PASS
- 15.5 Run for election on old leader( just so everyone is in the hat ) - PASS
- 15.6 Leader did not change when old leader re-ran - PASS
Case 17: Check for basic functionality with distributed primitives -
...
FAIL
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment and get a default counter on each node - PASS FAIL
- Error incrementing default counter
- 17.2 Increment and get an in memory counter on each node - PASS FAIL
- Error incrementing in memory counter
- 17.3 Check counters are consistant across nodes - PASS
- 17.4 Counters we added have the correct values - PASS
- 17.5 Distributed Set get - PASS
- 17.6 Distributed Set size - PASS
- 17.7 Distributed Set add() - PASS
- 17.8 Distributed Set addAll() - PASS
- 17.9 Distributed Set contains() - PASS
- 17.10 Distributed Set containsAll() - PASS
- 17.11 Distributed Set remove() - PASS
- 17.12 Distributed Set removeAll() - PASS
- 17.13 Distributed Set addAll() - PASS
- 17.14 Distributed Set clear() - PASS
- 17.15 Distributed Set addAll() - PASS
- 17.16 Distributed Set retain() - PASS
...
- 8.1 Comparing ONOS topology to MN - No Result
- 8.2 Collecting topology information from ONOS - PASS
- 8.3 Hosts view is consistent across all ONOS nodes - PASS
- 8.4 Hosts information is correct - PASS
- 8.5 Host attachment points to the network - PASS
- 8.6 Clusters view is consistent across all ONOS nodes - PASS
- 8.7 There is only one SCC - PASS
- 8.8 Device information is correct - PASS
- 8.9 Links are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 10: Restore a link to ensure that Link Discovery is working properly - PASS
...
- 8.1 Comparing ONOS topology to MN - No Result
- 8.2 Collecting topology information from ONOS - PASS
- 8.3 Hosts view is consistent across all ONOS nodes - PASS
- 8.4 Hosts information is correct - PASS
- 8.5 Host attachment points to the network - PASS
- 8.6 Clusters view is consistent across all ONOS nodes - PASS
- 8.7 There is only one SCC - PASS
- 8.8 Device information is correct - PASS
- 8.9 Links are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 11: Killing a switch to ensure it is discovered correctly - PASS
...
- 8.1 Comparing ONOS topology to MN - No Result
- 8.2 Collecting topology information from ONOS - PASS
- 8.3 Hosts view is consistent across all ONOS nodes - PASS
- 8.4 Hosts information is correct - PASS
- 8.5 Host attachment points to the network - PASS
- 8.6 Clusters view is consistent across all ONOS nodes - PASS
- 8.7 There is only one SCC - PASS
- 8.8 Device information is correct - PASS
- 8.9 Links are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents - FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 12: Adding a switch to ensure it is discovered correctly - PASS
- 12.1 Add back s5 - PASS
Case 8: Compare ONOS Topology view to Mininet topology -
...
FAIL
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN - No Result
- 8.2 Collecting topology information from ONOS - PASS
- 8.3 Hosts view is consistent across all ONOS nodes - PASS
- 8.4 Hosts information is correct - PASS
- 8.5 Host attachment points to the network - PASS
- 8.6 Clusters view is consistent across all ONOS nodes - PASS
- 8.7 There is only one SCC - PASS
- 8.8 Device information is correct - PASS
- 8.9 Links are correct - PASS FAIL
- Links are incorrect
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sendind traffic across Intents -
...
FAIL
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Ping across added host intents - PASS FAIL
- Intents have not been installed correctly, pings failed.
- 4.2 Check Intent state - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS FAIL
- Intents have not been installed correctly, pings failed.
Case 13: Test Cleanup - PASS
...